
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware unfinished wood knob gives you a 1-1/4 inch diameter pull in natural wood, so you start with a clean, sandable surface that can be stained or painted to match cabinet jobs. The knob is part of the Natural Woodcraft collection, which keeps the style simple and round for use on a wide range of doors and drawers in the same run. The unfinished wood material provides a consistent grain appearance, helping built-ins, kitchen cabinets, or shop storage look uniform once finished. A projection of 1-1/8 inch sets the grip off the face of the door far enough for comfortable use while keeping profiles tight in narrow walkways. The 1-1/8 inch base diameter steps the knob neatly back to the door, which helps cover the drilled hole and gives a clean transition against the panel.
The Natural Woodcraft unfinished knob is built around a 1-1/4 inch diameter, so it aligns well with standard cabinet layout grids where knobs land roughly centered on rails or drawer fronts. Its 1-1/8 inch projection gives enough stand-off that hands clear the door surface as the knob is pulled, which is helpful on frequently used kitchen or bath cabinets. The 1-1/8 inch base diameter sits firmly over the drilled hole and offers a defined shoulder for tightening against the panel. The knob pairs with an 8-32 x 1 inch screw, which matches common cabinet hardware drilling practices and supports repeatable installations across multiple doors and drawers on the same project.
This Hickory Hardware Natural Woodcraft knob, in unfinished wood, suits cabinet doors and drawers where a simple round profile is preferred and a custom finish is required. The 1-1/4 inch diameter gives enough presence on face-frame cabinets, frameless cabinets, or built-in storage so the knob is easy to find by touch in busy work areas. Because the material is unfinished wood, it can follow the same stain schedule as oak, maple, or other wood fronts, supporting color matching across a full kitchen or office bank. The 1-1/8 inch projection helps when cabinets are installed near appliances or walls because it keeps the pull compact while still allowing fingers behind the knob. With a 1-1/8 inch base diameter, the footprint works well on both narrow rails and wider drawer fronts, helping maintain a consistent look from upper cabinets to lower storage.
The combination of 1-1/4 inch diameter and 1-1/8 inch projection gives a familiar cabinet feel, which is useful when swapping out older knobs while keeping drilling locations the same. The 1-1/8 inch base diameter covers typical 3/16 to 1/4 inch bores cleanly, so edges of the hole stay hidden after finishing. Using an 8-32 x 1 inch screw aligns with common hardware threading used across many cabinet lines, which helps installers move quickly from door to door with the same driver setup. The unfinished wood surface responds predictably to primers, stains, and topcoats, which helps finishing teams dial in sheen and color across multiple rooms. As part of the Natural Woodcraft collection, the knob keeps styling restrained, allowing the wood finish to carry the visual impact rather than the hardware shape.
The knob has a 1-1/4 inch diameter, 1-1/8 inch projection, 1-1/4 inch width, and a 1-1/8 inch base diameter, giving a compact profile that still offers a full hand grip.
The knob is made from wood with an unfinished wood finish, allowing it to receive stain, paint, or clear coats along with the cabinet doors or drawers.
The knob uses an 8-32 x 1 inch screw, matching a common cabinet hardware thread and length for mounting through typical door and drawer front thicknesses.
The knob projects 1-1/8 inch from the cabinet face, keeping it low profile while still giving enough clearance for fingers to pull comfortably.
The knob is part of the Natural Woodcraft collection, providing a simple round style suited to wood-focused cabinet designs.
The manufacturer part number is P685-UW, which identifies this specific unfinished wood knob within the Hickory Hardware and Belwith Keeler lines.
The Hickory Hardware unfinished wood knob P685-UW combines a 1-1/4 inch diameter, 1-1/8 inch projection, and 1-1/8 inch base in a Natural Woodcraft profile that suits many cabinet layouts. With unfinished wood and an 8-32 x 1 inch screw size, it fits directly into standard cabinet drilling and finishing workflows. For projects that call for a round wood pull that can follow your stain or paint schedule, this knob offers a straightforward option that aligns with common cabinet dimensions and installation practices.
Sold In: 1 Pair