
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Sunnyside Series knob from Belwith Keeler is a zinc die cast cabinet knob in a polished chrome finish, so it delivers a bright, metal look suited to decorative hardware projects. The knob diameter is 1-1/8 inch, which gives a compact grip area suited to cabinet doors or smaller drawers where a low-profile pull point is important. A 1 inch projection sets the hand clearance off the surface, supporting comfortable fingertip use without the knob standing too far into walkways. The listed width of 1-1/8 inch matches the diameter, giving a round profile that feels consistent from any approach angle. A base diameter of 1/4 inch concentrates the load at a small footprint on the door or drawer face, which matters when aligning the knob visually on narrow rails or stiles.
The 1-1/8 inch diameter on this Belwith Keeler cabinet knob provides a clear reference when laying out drill points across multiple doors, supporting even visual spacing on face frames or frameless fronts. With a 1 inch projection, the body depth from the surface is defined, which helps installers anticipate knob clearance relative to nearby hardware or appliance handles. The 1/4 inch base diameter focuses the load at a compact circle, which matters when setting knobs on narrow rails where larger bases might overhang decorative edges. The 8-32 thread specification directly informs bit and tap choices for shop-prepared panels, aligning the knob with standard cabinet hardware practices. The polished chrome finish, paired with these fixed dimensions, supports consistent appearance when repeating this knob across a full kitchen or bank of casework.
This polished chrome cabinet knob from the Sunnyside Series is defined by a 1-1/8 inch diameter, which suits it to cabinet doors and drawers that benefit from a modest pull point rather than an oversized grip. The 1 inch projection sets the working depth off the face, fitting typical cabinet face thicknesses while preserving finger access on both framed and frameless constructions. Its 1/4 inch base diameter allows placement on narrow rails or stile edges where a broader base might conflict with profiles or reveal lines. The zinc die cast construction ties these dimensions into a single molded piece, which supports uniform appearance across multiple units in a run of casework. The polished chrome finish coordinates visually with other chrome decorative elements, helping installers maintain a consistent hardware theme on a project.
The P214-3 cabinet knob uses the 1-1/8 inch diameter as a predictable reference for layout, which allows installers to standardize drill locations on jigs or templates for efficient repetition. With a 1 inch projection, the knob depth is known in advance, supporting planning around door swing near walls, adjacent cabinets, or tall panels. The 1/4 inch base diameter defines the footprint that bears against the door or drawer surface, which is useful when marking centerlines on narrow frames or detailed panel edges. The 8-32 x 1 inch screw size specification ties directly to standard cabinet hardware threading, letting shops align drilling depth and thread expectations with other knobs using the same standard. Combined with the polished chrome finish and zinc die cast body, these fixed measurements help maintain visual and dimensional consistency on multi-cabinet installations.
The P214-3 knob has a 1-1/8 inch diameter, 1 inch projection, 1-1/8 inch width, and a 1/4 inch base diameter, which defines its size for layout on cabinet doors and drawers.
This Belwith Keeler cabinet knob is made from zinc die cast, giving a solid, molded metal body suited to decorative cabinet hardware applications.
The knob has a polished chrome finish, providing a bright, reflective metal appearance that coordinates with other chrome decorative hardware in a project.
This cabinet knob has a 1 inch projection, so it stands 1 inch off the cabinet surface, affecting hand clearance and spacing near adjacent components.
The P214-3 cabinet knob uses an 8-32 x 1 inch screw size, aligning with standard cabinet knob threading for typical drilled and tapped installations.
This polished chrome cabinet knob belongs to the Sunnyside Series collection from Hickory Hardware, identified under the Belwith Keeler brand.
This Sunnyside Series polished chrome cabinet knob from Belwith Keeler provides defined dimensions, including a 1-1/8 inch diameter and 1 inch projection, giving installers clear layout references for cabinet doors and drawers. The zinc die cast construction and polished chrome finish combine appearance with a solid metal body, supporting decorative hardware choices in kitchens, baths, or casework projects. With its 1/4 inch base diameter and 8-32 thread specification, the knob aligns with common cabinet hardware practices, helping projects maintain consistent sizing and threading standards. Use these fixed measurements and finish details to match this P214-3 cabinet knob to the visual style and dimensional requirements of the installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BWP213-26 Mfr# P213-26 | Hickory Hardware Sunnyside Polished Chrome 1-1/8" (29 mm) Diameter Knob, P213-26 |