Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M 255L Stikit 6 PSA sanding disc is a 6 inch aluminum oxide abrasive disc on a strong and flexible gold film, so it handles sanding while delivering an outstanding finish on demanding jobs. The aluminum oxide abrasive is described as premium, which provides cutting performance that stays consistent across the disc, keeping surfaces even and work results uniform. The film backing is specifically noted as strong and flexible and tear resistant, so the disc stays intact around edges and contours instead of shredding and slowing work. That same film backing is described as providing heat resistance for longer life, so the abrasive keeps working instead of failing early from heat build-up on extended sanding passes. This disc is identified as no hole only, so it presents a full sanding face for continuous contact where vacuum extraction is not required.
This 3M 255L Stikit 6 PSA 120 grit no hole aluminum oxide sanding disc on film works with 6 inch disc sanding tools that accept either pressure-sensitive adhesive or hook and loop systems, because the abrasive is offered in both Stikit PSA and Hookit hook and loop formats. The Stikit PSA version uses a pressure-sensitive adhesive attachment, so the disc presses onto a compatible backup pad and stays flat for controlled sanding strokes. The Hookit hook and loop version uses a hook and loop attachment interface, so discs press on and peel off a matching pad quickly when changing grits during a finishing sequence. The no hole face keeps the disc solid across its 6 inch diameter, so installation alignment focuses on centering the disc rather than matching a vent pattern.
The 3M 255L Stikit 6 PSA 120 grit no hole aluminum oxide sanding disc on film belongs in abrasive setups where a 6 inch disc format is standard and a film-backed disc is preferred for durability. The gold film construction is described as strong and flexible and tear resistant, so it supports sanding on flat panels while also tolerating light edge contact and slight contouring without sudden tearing. The design for long life and outstanding finish means this disc suits workflows where operators expect to move from shaping to pre-finish sanding without frequent abrasive changes. Premium aluminum oxide on the film provides the cutting surface, so each disc can be used across typical sanding passes where a balanced cut and finish are required. Because the product is described for industrial and occupational use only, it is directed at trained users in workplace environments that rely on predictable abrasive performance.
The strong and flexible film backing used on the 3M 255L Gold Film disc provides heat resistance for longer life, so the disc remains effective across extended sanding cycles and helps maintain consistent surface quality from start to finish on a part. That same film backing is specifically tear resistant, so when operators work near edges or transitions the disc resists edge snagging that would otherwise interrupt the sanding sequence. The special 3M Fre-Cut coating is described as resisting loading, so sanding dust sheds more readily from the abrasive surface, which helps the disc sustain its cut rate and keeps scratch patterns more uniform over its life. Being available in both Stikit PSA and Hookit hook and loop provides flexibility in how discs are rotated through a job, so crews can match the same abrasive to existing pad systems and standardize finish expectations across different tools.
The 3M 255L Gold Film disc uses premium aluminum oxide, which provides a cutting surface that supports consistent sanding performance and an outstanding finish across the disc life.
The film backing is strong, flexible, and tear resistant, so it keeps the disc intact around edges and contours and maintains even pressure during sanding passes.
The film backing provides heat resistance for longer life, so the disc continues to cut effectively during extended sanding runs without failing early from heat buildup.
The special 3M Fre-Cut coating resists loading, so sanding dust does not clog the surface as quickly and the disc maintains its cutting action longer.
The disc is described as no hole only, so the full 6 inch face is abrasive surface, providing uninterrupted contact when sanding without a matching hole pattern.
This abrasive is available in Stikit PSA and Hookit hook and loop, so it attaches to either pressure-sensitive adhesive pads or hook and loop backup pads.
The 3M 255L Stikit 6 PSA 120 grit no hole aluminum oxide sanding disc on film combines premium aluminum oxide with a strong and flexible film backing, so it supports long life and an outstanding finish in 6 inch disc sanding setups. The film backing provides heat resistance and is tear resistant, so sanding remains stable around edges and during extended runs. With a special 3M Fre-Cut coating that resists loading and availability in both Stikit PSA and Hookit hook and loop formats, this gold film disc aligns with industrial and occupational sanding workflows that depend on consistent, repeatable abrasive results.
Sold In: 1 Roll
