Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KEYBOARD ARM, STANDARD describes the CompX Ergonomx 5930D keyboard arm, which uses a 17 inch track with plastic glides to support smooth under-desk movement, so the keyboard platform can travel in and out along a defined path during daily use. The fully articulated design works with the 6 inch height adjustment range of plus 1 inch and minus 5 inches, using a control knob, so installers can set the keyboard level to suit seated users at different desk heights. This same arm provides keyboard platform tilt adjustment of plus 10 degrees and minus 15 degrees through a release lever on the front, which lets the user change wrist angle while keeping the platform stable. A 360 degree rear swivel lets the arm rotate around its mounting point, so the platform can swing to the side when space in front of the desk is needed. The hold-out lock helps to prevent keyboard crawl, so the platform stays extended when positioned for typing. Steel construction with a black powder coat finish provides a rigid arm structure and a neutral appearance under typical office or workstation furniture.
The 5930D Series track length of 17 inches defines the under-surface footprint for mounting, so installers plan desk space to accept the full travel of the keyboard arm. Plastic glides within this track support repeated movement, so the arm can slide smoothly between retracted and extended positions. The 6 inch height adjustment range of plus 1 inch and minus 5 inches uses a control knob, giving a clear mechanical method to raise or lower the platform within that span. This design lets installers or users dial in a specific height and then secure it using the same knob. The keyboard platform tilt adjustment of plus 10 degrees and minus 15 degrees is controlled by a release lever on the front of the mechanism, so users change tilt from the normal working position without accessing the rear of the arm. The 360 degree rear swivel provides full rotation at the mounting point, which supports corner applications or side access positions. The hold-out lock helps to prevent keyboard crawl, maintaining the chosen extended position during typing. The steel, black powder coat build supports these functions as a single integrated arm assembly.
The CompX Ergonomx 5930D keyboard arm is designed around a 17 inch track with plastic glides, which suits workstations that need controlled under-desk travel in a moderate depth. The fully articulated arm works with the 6 inch height adjustment range of plus 1 inch and minus 5 inches, controlled by a knob, so it fits applications where multiple users may share a station but require different keyboard heights during the day. The keyboard platform tilt range of plus 10 degrees and minus 15 degrees, set with a front release lever, supports offices or production spaces where users alternate between neutral and slightly negative tilt for comfort while working at a screen. The 360 degree rear swivel lets the arm rotate around the mounting point, which helps at corner desks or in tight layouts where the platform must swing aside to open space in front of the worksurface.
The track-based design with plastic glides gives the 5930D keyboard arm a defined slide path, which supports repeatable front-to-back positioning each time users pull the platform out to the same spot. The 6 inch vertical range of plus 1 inch and minus 5 inches, adjusted with the control knob, provides a measurable span for installers setting up several stations to similar ergonomic targets within an office. The keyboard platform tilt settings of plus 10 degrees and minus 15 degrees, changed via the front release lever, let users fine-tune angle without tools, which keeps adjustment quick during normal shifts. The 360 degree rear swivel directly affects access flexibility, allowing the platform to pivot to alternate positions without changing height or tilt, which helps avoid repeated re-adjustment. The hold-out lock that helps to prevent keyboard crawl maintains the selected extended position, reducing unplanned movement that would otherwise require frequent repositioning. Steel construction and a black powder coat finish tie these features together in a single rigid arm assembly, supporting consistent motion over repeated adjustments in commercial workstation environments.
The 17 inch track with plastic glides guides under-desk travel, so the 5930D keyboard arm slides smoothly between retracted and extended positions while keeping movement on a defined path.
The CompX Ergonomx 5930D keyboard arm provides 6 inches of height adjustment, from plus 1 inch to minus 5 inches, using a control knob to set and hold the working keyboard level.
The 5930D keyboard arm uses a release lever on the front to adjust platform tilt from plus 10 degrees to minus 15 degrees, letting users change wrist angle while keeping the platform stable.
The 360 degree rear swivel on the 5930D keyboard arm allows full rotation at the mounting point, so the keyboard platform can swing to alternate positions around the desk edge.
The hold-out lock on the 5930D keyboard arm helps to prevent keyboard crawl, so the platform stays extended in the typing position instead of drifting inward during use.
The 5930D keyboard arm is made of steel with a black powder coat finish, providing a rigid arm structure and a dark appearance suited to typical office and workstation environments.
The CompX Ergonomx 5930D offers a 17 inch track with plastic glides, a 6 inch height adjustment range of plus 1 inch and minus 5 inches, and keyboard platform tilt from plus 10 degrees to minus 15 degrees, all supported by a 360 degree rear swivel and hold-out lock. For workstations that need repeatable under-desk travel, practical height change with a control knob, and quick tilt adjustment from a front lever, this steel, black powder coat arm provides a focused solution for building or updating adjustable keyboard positions.
Sold In: 1 Each