
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CompX Ergonomx 6170D keyboard arm uses a 17 inch track with ball bearing slides, so the keyboard platform moves smoothly in and out along the full travel, which helps users position the keyboard predictably under the work surface during daily use. The fully articulated design, combined with a 360 degree rear swivel, allows the arm to swing and rotate under the desk, which helps installers fit the platform to different user positions without changing the mounting. A 6 inch spring assisted height adjustment range moves from 1 inch above to 5 inches below the surface, giving ergonomic flexibility for varied seated heights while keeping movement controlled. Keyboard platform tilt adjustment from plus 10 degrees to minus 15 degrees uses a release lever on the front, so on-site users can change wrist angle quickly during setup or future adjustments.
This keyboard arm uses a 17 inch track with ball bearing slides mounted under the work surface, so the installer positions the track to define the keyboard platform travel path relative to the front edge. The spring assisted height adjustment covers a 6 inch range from 1 inch above to 5 inches below the surface, allowing the installer to set a neutral height and users to move between positions without heavy lifting force. Keyboard platform tilt from plus 10 degrees to minus 15 degrees is controlled by a release lever on the front of the mechanism, allowing convenient access when the tray is extended. The 360 degree rear swivel lets the entire arm rotate around its rear pivot, which helps align the keyboard to the seating position in workstations where users are not directly centered on the mounting location.
The low profile design of the CompX Ergonomx 6170D keyboard arm provides extra knee clearance beneath the work surface, which fits workstations where leg room is important and helps users sit closer to the desk edge. Back slope tray storage allows the platform to sit higher at the rear under the surface, which helps the keyboard clear nearby structural members and supports a clean stowed position when pushed back. The 17 inch track length sets a defined travel range under typical desk depths, which works in office or workstation environments where the platform must retract fully out of the primary knee space. Because the arm meets or exceeds BIFMA standards, it is suited for commercial workspace applications where products are selected to align with recognized office furniture performance criteria.
The fully articulated arm and 360 degree rear swivel let the CompX Ergonomx 6170D keyboard arm move laterally and pivot, which supports repeated positioning of the keyboard for different users sharing a station without relocating the track. Spring assisted height adjustment across the 6 inch range, from 1 inch above to 5 inches below the surface, helps users change elevation repeatedly during the day with controlled motion, supporting ergonomic shifts between higher and lower typing postures. The keyboard platform tilt range of plus 10 degrees to minus 15 degrees gives installers and users a defined adjustment window, which allows repeatable wrist-angle settings when setting up multiple stations to similar ergonomic guidelines. The hold-out lock that helps prevent keyboard crawl keeps the arm stable once set, supporting consistent keyboard reach during extended tasks. The steel construction with black powder coat finish provides a solid metal structure with a protective surface, which supports long-term use in typical commercial interiors while maintaining a uniform visual appearance under desks.
The CompX Ergonomx 6170D keyboard arm is fully articulated with a 360 degree rear swivel, so the platform can move in and out, pivot, and rotate to match user position at the workstation.
The keyboard arm offers 6 inches of spring assisted height adjustment, from 1 inch above to 5 inches below the work surface, allowing ergonomic positioning for different seated heights and typing preferences.
The keyboard platform tilt adjustment ranges from plus 10 degrees to minus 15 degrees, using a release lever on the front, which supports fine tuning of wrist angle for comfortable typing.
The hold-out lock on the keyboard arm helps prevent keyboard crawl, so the platform stays in the chosen position when users type or rest their hands, reducing unwanted sliding.
The low profile design and back slope tray storage provide extra knee clearance and a higher rear stow position, which improves leg room and tray storage in tight under-desk spaces.
The keyboard arm meets or exceeds BIFMA standards, which aligns it with recognized office furniture performance criteria for typical commercial workstation environments.
The CompX Ergonomx 6170D keyboard arm combines a 17 inch ball bearing track, fully articulated movement, and 360 degree rear swivel, giving installers a single mechanism that supports smooth retraction and flexible positioning under desks. Its 6 inch spring assisted height adjustment, from 1 inch above to 5 inches below the surface, along with tilt adjustment from plus 10 degrees to minus 15 degrees, provides the range needed for ergonomic keyboard placement in shared or individual workstations. With a low profile design, back slope tray storage, and steel construction in black powder coat, this keyboard arm suits commercial or office environments needing dependable under-desk keyboard positioning.
Sold In: 1 Each