95mm Angled Bed Fitting, Galvanized, Set of 1

95mm Angled Bed Fitting For Bed Assembly

95mm angled bed fitting gives you a dedicated fastening solution for assembling angled bed frames and similar panel constructions. This Pro Value Series fitting works as a panel assembly fitting, tying rails and posts together at a fixed angle so frames stay aligned under load. The galvanized finish adds a protective coating on the metal surfaces, supporting performance in typical indoor woodworking environments. As an angled post hanger, it fits that role in bed construction where rails need a consistent, repeatable connection to the posts. The fitting is part of Würth Baer Supply's fasteners and panel assembly hardware range, so it integrates naturally into woodworking workflows that already rely on metal fittings for repeatable results. By focusing on a defined 95mm fitting size, it helps installers standardize on one pattern across multiple bed designs.

Key Angled Post Hanger Details For Builders

• The set includes 4 male and 4 female pieces per set, so each connection point uses matched components that lock together and help keep joints aligned during assembly.
• Designed for board widths 4 inch to 7 inch, this range targets common bed rail dimensions, supporting predictable fit when laying out rail-to-post connections on typical lumber sizes.
• For larger board widths, 2 units on each corner may be used for increased rigidity, allowing builders to scale up joint stiffness where wider rails or heavier builds demand more support.
• Surface mounted brackets require no mortising or machining, which keeps installation to layout and screw placement and reduces time at the bench compared with recessed hardware prep.
• Sold in full sets of 4 only, the product is structured for multi-corner projects so installers can plan jobs around complete frame layouts instead of piecing together partial quantities.

Surface Mounted Bed Fitting Installation Approach

This angled post hanger uses surface mounted brackets, so installers work directly on the board faces rather than cutting recesses. That no-mortising requirement keeps the process focused on accurate measurement, layout, and fastener placement. Because the hardware is intended for board widths from 4 inch to 7 inch, installers can position the brackets to sit fully on the rail and post faces within that range. When projects call for wider boards, using 2 units on each corner distributes forces across a larger area, which can support bed frames built from heavier or wider stock. The defined 95mm size and matched male and female pieces create a repeatable layout pattern, which supports consistent results across multiple beds or production runs.

Using This Angled Post Hanger In Bed Builds

Where This 95mm Angled Bed Fitting Works

This 95mm angled bed fitting is intended for bed frames and similar panel assemblies where rails meet posts at an angle and need a fixed, metal-to-metal connection. As a panel assembly fitting in the fasteners and panel assembly hardware category, it suits woodworking projects that rely on mechanical connectors rather than cut joinery alone. When used on board widths between 4 inch and 7 inch, the fitting spans the rail and post faces in a way that supports the joint along its working area. On larger board widths, the option to use 2 units on each corner lets builders extend that support, especially on beds designed for heavier use. The Pro Value Series branding positions this part within a family of fittings that serve trade woodworkers needing predictable connection hardware.

Why These Panel Assembly Details Matter

Having 4 male and 4 female pieces per set means each corner connection uses complementary parts designed to engage cleanly, which can reduce play at the joint compared with ad hoc hardware combinations. The angled post hanger geometry ties into bed design by giving rails a defined engagement point on the posts, helping frames sit square once assembled. Galvanized metal surfaces provide a treated finish that supports long-term use in typical indoor environments where metal parts contact wood components. Because the brackets are surface mounted and require no mortising or machining, an installer can keep the workflow focused on precise positioning, which is critical when repeating the same setup across four corners. Sold in full sets of 4 only, the product naturally fits projects that standardize on one bed frame per order or batch, aligning order quantities with common bed layouts.

Common Questions About This Angled Bed Fitting

Selecting This 271.05.906 Bed Fitting For Projects

The 95mm angled bed fitting from Pro Value Series, part number 271.05.906, offers a defined way to join bed rails and posts as part of panel assembly work. With 4 male and 4 female pieces per set and suitability for 4 inch to 7 inch board widths, it supports common bed rail dimensions. Surface mounted brackets that require no mortising or machining align well with shop workflows built around fast, repeatable setups. For larger board widths, using 2 units on each corner provides a route to increased rigidity on heavier builds. For installers and shops sourcing from Wurth Baer Supply, this angled post hanger fits directly into fasteners and panel assembly hardware planning for bed projects.