Grass #8 x 3/4 Flat Head Hinge Screw

Grass #8 x 3/4 Flat Head Hinge Screw is a case hardened wood screw from Grass America designed for installing hinges and drawer slides, so it supports repeatable cabinet hardware mounting on shop builds and install jobs. The #8 size with 3/4 inch length matches common cabinet door and drawer front applications, helping fasten hardware securely in typical face frames and panels. The flat head profile suits hinge and drawer slide installation, allowing the head to sit flush in standard countersunk mounting holes. The sharp point detail lets the screw start quickly in wood, saving time when driving multiples during runs of doors or drawer boxes. Coarse thread geometry grips wood fibers firmly, helping pull hinges and slides tight to the surface to maintain alignment. The nickel finish gives the head a clean appearance at exposed hinge or slide locations, matching nickel-toned hardware in many cabinet projects.

Key Details For Hinge And Slide Work

• The case hardened construction provides a robust wood screw, supporting dependable driving into cabinet components during hinge and drawer slide installation where many screws are used per job.
• The #8 diameter and 3/4 inch length balance holding power with manageable penetration depth, which suits typical cabinet materials where hinges and slides are mounted without excessive breakthrough risk.
• The flat head design matches hinge and slide countersinks, so the screw seats properly in hardware mounting holes and helps maintain smooth hinge and drawer slide operation.
• The sharp point feature allows the screw to engage wood quickly, reducing effort when starting screws in rails, stiles, and drawer sides during repetitive installation work.
• The coarse thread pattern increases bite in wood substrates, helping draw hardware snugly to the surface and supporting consistent alignment across multiple doors and drawers.
• The nickel finish provides a uniform metallic appearance, which coordinates with nickel-colored hinges and drawer slides for a consistent hardware look on finished cabinets.

Installation Use With #2 Phillips Drive

This case hardened wood screw uses #2 Phillips drive bits, so it matches one of the most common driver sizes found on site and in shops for cabinet fastening work. The Phillips drive interface gives positive engagement between the bit and the screw head, helping transfer torque efficiently when installing hinges and drawer slides. The sharp point on this #8 x 3/4 inch screw allows starting directly into wood, which suits hinge plates and drawer slide flanges that are fastened without pre-threaded holes. The flat head design works with typical countersunk holes in hinge and slide hardware, so once driven with a #2 Phillips bit, the head seats neatly and supports consistent hardware positioning on doors and drawer boxes.

Using This Screw In Cabinet Hardware Projects

Where This Grass Wood Screw Performs Best

This Grass America #8 x 3/4 inch flat head screw is described as a hinge and drawer slide installation screw, so it fits work where those hardware components mount to wood cabinet parts. The coarse thread pattern suits fastening into wood materials used in cabinet construction, providing grip in rails, stiles, and drawer sides during hardware layout. Its flat head form matches the countersunk mounting holes found on many hinges and drawer slides, supporting flush seating so hardware sits firmly against the wood surface. The nickel finish ties in visually with nickel-toned cabinet hardware, which matters on projects where exposed screw heads are visible at hinge or slide locations. Because the screw is case hardened, it supports repeated driving during runs of hardware installation on doors and drawers throughout a kitchen or commercial cabinet job.

Details That Support Consistent Hardware Alignment

The combination of #8 diameter and 3/4 inch length helps balance holding strength with controlled depth, so hinges and drawer slides mount securely while respecting typical cabinet material thicknesses. This proportion assists in keeping hardware tight to the surface, which is important for maintaining consistent reveal lines and smooth slide operation. The sharp point allows quick starts in wood, reducing wandering as screws are driven through hinge or slide holes into cabinet frames or boxes. Coarse thread engagement helps pull mounting flanges tight, which supports repeatable alignment across multiple openings in a run of cabinetry. The screw uses #2 Phillips drive bits, aligning with common tools already used on cabinet jobs, which streamlines hinge and slide installation workflow. The nickel finish on the head provides a finished appearance, supporting a professional look wherever these screws remain visible on completed installations.

Common Questions About This Grass Screw

Selecting This Screw For Hardware Installation

Choose this Grass America case hardened #8 x 3/4 inch flat head wood screw when a hinge and drawer slide installation screw with coarse thread, sharp point, and #2 Phillips drive suits your cabinet work. Its nickel finish complements nickel-toned hardware, and the flat head design works with typical hinge and drawer slide countersinks to support consistent, repeatable mounting on doors, frames, and drawer boxes.