Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass #6 x 1-inch flat head hinge and drawer slide installation screw is a dedicated mounting fastener for European cup hinges, drawer slides, and cabinet hardware in panels where 3/4-inch stock or a combined face-frame thickness calls for a longer bite. The Nickel finish, #2 Phillips drive, coarse thread, and sharp point make it a straightforward fit for production shops and installers working through a full box of hardware in a single session.
Most European hinge and drawer slide mounting plates are designed around a short screw, and a 3/4-inch fastener handles the majority of installations in standard 3/4-inch panels. The 1-inch version earns its place when the mounting surface is thicker: a face-frame cabinet where the hinge plate lands on a stile plus panel, a shop-made cabinet with a heavier panel stock, or any situation where a shorter screw risks pulling out under repeated door or drawer cycling. The extra thread engagement in the panel locks the hardware in place without the need for longer specialty anchors or additional fasteners.
The Nickel finish was chosen to match the metal tones of Grass hinges and drawer slides rather than disappear behind them. When a hinge plate or slide bracket has visible mounting screws, a coordinated finish matters, especially in frameless cabinets with glass or open-frame doors where hardware heads stay in view. The flat head seats cleanly in the countersinks pressed into Grass mounting plates, and the #2 Phillips drive is compatible with the standard drill-driver bits every installer already carries.
Cabinet shops that specify Grass hinges and slides as their primary hardware line often stock this screw alongside the hardware itself to ensure a consistent look across every installation. The 500-piece box suits a shop running full kitchen and bath jobs or an installer pulling hardware from multiple cartons in a day. It is also the right call for a remodel where existing Grass hardware is being relocated or replaced and the original screw holes have been partially stripped, since the 1-inch length reaches fresh wood below the damaged surface.
Use the 1-inch screw when your mounting surface is thicker than standard 3/4-inch sheet goods, when the hinge or slide plate lands on a face frame plus panel, or when you need additional thread depth because an existing hole has been overdriven.
Yes. The flat head and #6 gauge are sized for the countersunk holes in standard Grass hinge plates and drawer slide brackets. The flat head seats flush without standing proud of the plate surface.
In most cases the hardware mounting plate itself positions the screw, and the sharp point self-starts in the pre-bored or punched holes in the plate. For installation directly into solid hardwood without a plate, a pilot hole reduces the risk of splitting.
The Nickel finish is selected to coordinate with the metal tones found on Grass hinge and slide hardware. It will not be an exact color match to every Grass product finish, but it reads as intentional rather than mismatched in most installations.
Yes. The #6 gauge flat head and coarse thread are common across European-style hardware from multiple manufacturers. Confirm the mounting plate hole size and countersink angle match before substituting, but this screw is a practical fit for most standard hinge and slide plates.
When the hardware is Grass and the panel calls for a longer reach, this 1-inch screw puts the right fastener in the right hole every time, without improvising with a longer general-purpose screw that may not seat flush or a shorter one that does not hold.
Sold In: 500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each |  GF81003 Mfr# 81003-43 | Grass #6 x 3/4" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81003-43 - 500/Box | ||||
Sold in: 500 Each |  GF81005 Mfr# 81005-43 | Grass #8 x 3/4" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81005-43 - 500/Box | ||||
Sold in: 500 Each |  GF81014 Mfr# 81014-43 | Grass #6 x 1/2" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81014-43 - 500/Box |