Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass #6 x 3/4-inch Flat Head Hinge and Drawer Slide Installation Screw is a dedicated hardware mounting screw sized for the shallow panels and tight clearances common in modern cabinet construction. Made by Grass America and packaged 500 to the box, it delivers consistent seating wherever panel depth is limited and a protruding screw tip would cause problems.
When hinge plates and drawer slide mounting clips land on panels that are 1/2 inch to 5/8 inch thick, a 1-inch screw risks punching through the face or disrupting a veneer on the opposite side. The 3/4-inch length stops well short of that threshold while still engaging enough material to hold hardware firmly under daily load. It is the go-to length for frameless cabinet sides, drawer box sides, and any panel where a longer screw would over-penetrate. Installers running European-style hinges on thinner melamine or plywood panels will find this length eliminates the guesswork about tip clearance.
The nickel finish does two jobs: it provides a base level of corrosion resistance appropriate for indoor cabinet environments, and it blends with the nickel hardware components that Grass and other European hinge brands commonly use. Inside a finished cabinet, mismatched fastener color is a detail that stands out to quality-conscious customers. The #6 flat head profile is sized to countersink cleanly into the pre-formed holes in hinge mounting plates and slide brackets without standing proud or requiring additional countersinking work on the panel itself.
Cabinet shops assembling frameless or face-frame boxes with thin panel walls keep this screw at every hinge and slide station. Installers doing on-site finish work on pre-built cabinets reach for it when replacing hardware or completing a run where thin panels are involved. The 500-count box is sized for a high-production job or a sustained shop supply, so it fits both the small custom shop doing a single kitchen and the production line cycling through dozens of units a week.
Yes. The 3/4-inch length engages the panel without the tip breaking through a 1/2-inch panel face, making it a reliable choice for thinner frameless cabinet sides.
The #6 flat head is sized to seat in the countersunk holes of European hinge mounting plates and most drawer slide brackets without additional countersinking on the panel.
While it is sold by Grass America, the #6 gauge and flat head profile are standard dimensions that fit the mounting holes of most European hinge and drawer slide hardware brands.
In most cabinet panel materials including melamine, particleboard, and plywood, the sharp point self-starts without a pilot hole. In very thin or edge-grain hardwood, a pilot hole reduces the risk of splitting.
Inside a finished cabinet, exposed screw heads at hinge plates and slide brackets are visible when the door or drawer is open. Matching the screw finish to the hardware finish is a small detail that matters to quality-conscious buyers.
When panel depth is limited and hardware fit has to be clean, the Grass 3/4-inch installation screw removes the variables: correct length, correct gauge, correct finish, correct drive, right out of the box.
Sold In: 500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each |  GF81004 Mfr# 81004-43 | Grass #6 x 1" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81004-43 - 500/Box | ||||
Sold in: 500 Each |  GF81005 Mfr# 81005-43 | Grass #8 x 3/4" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81005-43 - 500/Box | ||||
Sold in: 500 Each | GF81014 Mfr# 81014-43 | Grass #6 x 1/2" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81014-43 - 500/Box |
