
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Under Desk CPU Holders from Doug Mockett and Company, Inc. give a CPU a fixed position under a work surface, keeping it off the floor and out of the way during daily use. This universal, sturdy, fixed position holder supports CPUs weighing up to 27 lb, so it manages typical desktop towers without overloading the bracket. The holder can be mounted to accommodate vertical or horizontal orientation, letting the installer match the CPU layout and desk design on each job. Adjustable sizing from 14 inches to 24 inches tall and 5-1/2 inches to 9-3/8 inches wide lets one holder work across a wide range of CPU case sizes. Steel construction with a black finish provides a solid, rigid frame that integrates cleanly with modern office furniture or shop-built workstations.
This CPU holder mounts under a work surface as a stationary, fixed position support, so once installed the CPU stays in one set location. The 14 inch to 24 inch height range and 5-1/2 inch to 9-3/8 inch width range give installers clear sizing windows when matching the holder to existing CPUs. Rated capacity up to 27 lb sets a defined upper limit, which guides selection of suitable cases in an office, shop, or lab environment. Steel construction adds rigidity around the CPU, while the black finish visually blends with common underside desk components and cable runs.
This CPU Holder, CPU1A/AS-90 from Doug Mockett and Company, Inc., is suited to under desk applications where a CPU needs a stable, non-sliding support. The ability to mount the holder for either vertical or horizontal CPU orientation helps it adapt to desks with modesty panels, cable trays, or other under-surface components. Adjustable height from 14 inches to 24 inches lets the holder grip a wide range of CPU case profiles, which is useful on projects with mixed fleets of machines. Width adjustment from 5-1/2 inches to 9-3/8 inches allows the holder to capture both slimmer and wider towers, supporting consistent layouts across a run of workstations. Steel construction provides a solid frame beneath the desktop, so the CPU is cradled by a rigid structure rather than resting on the floor where dust and foot traffic are present.
The 27 lb rating on this fixed position CPU holder gives installers a defined load guideline, supporting repeatable planning when pairing CPUs and desks across multiple stations. Its universal, sturdy design means the same part number, CPU1A/AS-90, can serve different CPU case sizes, which simplifies specifying and reordering. Height adjustment between 14 inches and 24 inches lets the CPU sit correctly in relation to the underside of the desk, helping maintain airflow clearances around vents while keeping the case tucked up and out of the way. Width adjustment from 5-1/2 inches to 9-3/8 inches allows a snug lateral fit, which helps maintain connector alignment at the rear of the CPU when cables are dressed along the desk structure. Mounting that supports vertical or horizontal CPU position also helps standardize cable paths, improving consistency when rolling out similar workstation layouts. The black steel construction coordinates with typical under-desk components, helping finished installations look unified even when retrofitting into existing office or shop environments.
The CPU1A/AS-90 holder adjusts for CPUs from 14 inches to 24 inches tall and 5-1/2 inches to 9-3/8 inches wide, so it fits many compact and standard tower cases.
This stationary CPU holder is rated to house CPUs weighing up to 27 lb, which defines its maximum supported load for typical desktop towers.
This universal CPU holder can be mounted to accommodate vertical or horizontal CPU position, allowing alignment with desk layout and cable routing needs.
This CPU holder is constructed of steel with a black finish, providing a rigid support structure that visually blends under many commercial desks.
The CPU1A/AS-90 is a universal, sturdy, fixed position holder, so it keeps the CPU in a set location beneath the work surface.
The adjustable width from 5-1/2 inches to 9-3/8 inches lets the holder grip different case widths, helping secure the CPU and limit movement during everyday use.
The Doug Mockett and Company, Inc. CPU1A/AS-90 under desk CPU holder combines a universal, adjustable frame with a 27 lb rating and steel construction in a black finish. For workstation, office, or shop builds that need CPUs held off the floor in a fixed position, its 14 inch to 24 inch height range and 5-1/2 inch to 9-3/8 inch width range support consistent layouts across varied machines. When a project calls for an under desk CPU Holder from Wurth Baer Supply that balances adjustability with a defined load rating, this stationary CPU holder is a practical choice.