75 Degree Up-Opening Right Hand Lift Fitting Use

75 degree up-opening right hand lift fitting describes a Hettich America Corporation lid support that lets doors swing up safely out of the way and stay there, which helps when you need clear access to the cabinet or work area. This nickel-plated steel fitting is a lid support and stay from the Work Surface & Tables lift systems category, so it is built for controlled up-opening movement rather than loose hinges, giving more predictable motion when you lift the door. The right hand design means it is set up for right side mounting, which helps you plan cabinet layouts where door motion must be consistent from unit to unit. The 75 degree opening holds the door in a defined, open position, which keeps the front from dropping into the workspace.

Key Lid Support Details For Daily Use

• This lid fitting allows doors to swing up safely out of the way and be securely held in the open position, which keeps the door clear while you are working in the cabinet or at a work surface.
• The mounting accommodates the 32 mm system, so it integrates into cabinet constructions based on that drilling pattern, reducing layout time when you are working within a standard system.
• The 75 degree opening angle gives a repeatable stop point, so the door holds at a consistent height, helping with alignment to adjacent fronts and keeping motion predictable for users.
• The fitting is nickel plated steel, which provides a hard metal support with a nickel finish that suits typical cabinet hardware environments and matches other nickel-finished components visually.
• The product is identified as Hettich America Corporation part number 1001143, which helps you match this lift fitting accurately when reordering or aligning with project specifications.

Installation And 32 Mm System Mounting Fit

This lid support uses mounting that accommodates the 32 mm system, which ties directly into cabinet side or panel drilling patterns based on 32 mm spacing so you can position the lift fitting using familiar reference holes. The right hand configuration sets its geometry for the right side of an up-opening door, which helps when you are lining up the stay with hinges and other hardware on the same side. Because the fitting opens to 75 degrees and holds there, you can mount it knowing exactly how far the front will rise, which simplifies planning for overhead clearance. Its nickel-plated steel construction gives a solid feel at the mounting points, which supports repeated opening and closing in normal cabinet use.

Using This Hettich Lid Fitting On Projects

Where This Right Hand Lift Fitting Works

This Hettich America Corporation lid support is described as a lift fitting and lid support for doors that swing up, so it suits cabinet or work surface fronts that are designed to open upward rather than swing out. Because it holds the door securely in the open position, it is useful anywhere an open front could interfere with access if it dropped, such as overhead storage or upper cabinets. The 75 degree opening angle positions the door at a stable, angled height instead of fully vertical, which can help keep the door within reach while still clearing the workspace below. Being part of the Work Surface & Tables and Lift Systems, Lid Supports and Stays category, it fits into hardware plans where controlled lift and stay functions are needed for lids or doors.

Why These Lift Fitting Details Matter

The fact that the mounting accommodates the 32 mm system matters when you are building or modifying cabinets that already use 32 mm drilling, because you can line this lift fitting up without custom hole patterns. The right hand design gives a dedicated orientation, which simplifies repeat installations across multiple cabinets, since you know the stay geometry is consistent on every right side. With doors swinging up safely out of the way and being securely held open, you reduce unintended closing during use, which is important when people are reaching into storage or working at a surface beneath the door. The nickel-plated steel construction ties structural strength to a nickel surface, which coordinates with other nickel cabinet hardware so the finished project looks uniform while the lid support manages door motion.

Common Questions About This Hettich Lid Fitting

Selecting This Lift Fitting For Up-Opening Doors

This 75 degree up-opening right hand lift fitting from Hettich America Corporation provides a nickel-plated steel lid support that holds doors safely in an open position while using mounting that accommodates the 32 mm system. The 75 degree opening and right hand configuration define how the door will lift and where it will sit, which supports consistent planning across cabinets or work surfaces using up-opening fronts. For projects calling for a lid support and stay that keeps doors swinging up and held open, this Hettich lid fitting offers the defined motion and mounting pattern described here.