MDI Mfg Polyethylene Round Leveling Glides 1-1/8" Base Dia White 100/Pack

Polyethylene Round Leveling Glides For Stable Bases

Polyethylene round leveling glides from MDI Manufacturing provide a standard duty leveling point under work surfaces and furniture, so you can set a steady stance on uneven floors in shop or finished spaces. Each non-swivel level glide uses a fixed stem design, which keeps the base orientation consistent once installed and helps maintain a reliable contact point under the leg. The economy leveling glide construction supports cost-effective outfitting of multiple tables or cabinets in a run where consistent height matters. A floor base diameter of 1-1/8 inch spreads the load across a modest footprint, helping the leg sit solidly without concentrating pressure into a sharp point. The white finish on the glide base gives projects a light, neutral appearance at the floor line, which works well where the leg or toe area is visible and needs a clean, unobtrusive look.

Key Leveling Details That Support Your Build

• The standard duty rating suits everyday cabinet and furniture leveler use, so you can apply these glides under typical work surfaces and tables without overspecifying hardware.
• The non-swivel stem connection holds the 1-1/8 inch floor base in one orientation, which simplifies repeatable height adjustment when you are leveling several legs on the same installation.
• The 1-1/8 inch base diameter provides a defined contact area with the floor, which helps balance stability with a compact footprint around cabinet and furniture legs.
• The white glide base finish presents a neutral appearance, which can visually blend with light-colored casework, toe kicks, or painted table legs near finished floors.
• The optional metal insert bushing is designed to fit 1 inch square leg bases and is sold separately, which allows a square metal or wood leg to accept the glide stem in a controlled, reinforced way.

Level Glide Details For Practical Installation

This standard duty non-swivel level glide is set up for cabinet and furniture leveler applications, so it fits naturally into work surface and table builds where small height corrections are needed. The polyethylene construction supports a smooth interface at the floor contact point, which can help legs slide slightly during setup while you dial in the height. Because the glide does not swivel from the stem, adjustment focuses on vertical movement without the base rotating around, helping you keep alignment consistent across multiple legs. When used with the optional metal insert bushing sized for 1 inch square leg bases, the glide stem seats into a defined pocket within the leg, supporting a more controlled installation in square tube or similar leg constructions.

How These Cabinet Furniture Levelers Work

Where Polyethylene Round Leveling Glides Perform Best

These polyethylene round leveling glides are specified as work surface and tables cabinet and furniture levelers, so they are suited for legs under benches, cabinets, and utility tables in woodworking or shop environments. The economy leveling glide design lets you outfit long cabinet runs or multiple workstations while keeping part cost aligned with standard duty needs. In leg levellers and toe kicks applications, the 1-1/8 inch floor base diameter presents a defined point of support just inboard of the cabinet or furniture edge, which helps maintain a uniform reveal at finished floors. The white round leveling glide base works visually with light toe kick treatments or white casework, so the contact point at the floor reads as part of the overall design rather than a dark spot.

Why Non Swivel Level Glides Support Consistent Results

The poly non-swvl level glide configuration means the glide does not swivel from the stem, so once you adjust height the base remains oriented the same way, which helps maintain stable contact on rigid or slightly irregular flooring. In a bank of cabinets or a set of tables, that fixed orientation makes it easier to repeat adjustments because each glide responds predictably as you work around the piece. The standard duty rating aligns with common cabinet and furniture loading, which keeps the hardware choice appropriate for typical residential or light commercial work. When you add the optional metal insert bushing designed for 1 inch square leg bases, the glide stem locates into a consistent, reinforced pocket, supporting accurate leg height targeting and reducing the chance of legs seating differently from one unit to the next.

Common Questions About This Leveling Glide

Select This Glide For Consistent Leveling Results

Choosing this MDI Manufacturing polyethylene round leveling glide gives cabinet and furniture projects a standard duty, non-swivel leveling point sized with a 1-1/8 inch base diameter. The economy leveling glides description supports multi-unit work where cost and uniform function both matter. In installations using 1 inch square leg bases, the optional metal insert bushing provides a defined interface so the glide stem engages legs consistently across a run. For work surfaces, tables, and cabinet bases that need dependable leveling behavior from one leg to the next, this white round leveling glide supplies a clear, repeatable hardware choice.