Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Roo Clear Melamine Adhesive 16 oz gives installers a clear melamine glue for bonding melamine, vinyl, laminate, PVC edgebanding, wood veneer, and acrylics, so one product can serve multiple surface types on a job. The adhesive dries quickly to produce a clear bond, which helps joints and seams stay visually clean on exposed work. The bond is described as water resistant, so installations in normal moisture-prone interior areas gain added protection against incidental contact with water. The adhesive develops very high tensile strength, so assembled parts resist pull-apart forces once cured. The manufacturer lists an open time of 10-15 minutes, so parts can be positioned within that window without losing bond potential. An assembly time of 30-90 minutes is specified, which frames how long parts should remain clamped or at rest for the glue line to develop strength. The adhesive is supplied in a 16 oz canister, which suits shop benches and jobsite carts.
The specified open time of 10-15 minutes defines how long Roo Clear Melamine Adhesive remains workable on the surfaces, allowing spreading and part alignment before the glue begins to set. This window helps coordinate multi-part assemblies or longer runs of edgebanding without rushing placement. The assembly time of 30-90 minutes identifies how long components should remain in position while the adhesive develops strength, guiding when clamping or fixturing can be released in a typical workflow. The stated application temperature above 45 F ties performance to environmental conditions, so planning glue-ups around that range supports consistent curing. With a viscosity listed at 4,850 cps, the adhesive has a relatively thick consistency, which supports even coverage on melamine and similar materials while helping it stay where it is applied during assembly.
This Roo Products melamine glue is identified as a melamine adhesive for use on melamine, vinyl, laminate, PVC edgebanding, wood veneer, and acrylics, so it suits cabinet, fixture, and panel work that mixes these surfaces. Because the bond dries clear, it works well on exposed edges and seams where visible glue residue would detract from appearance. The water resistant bond description aligns with interior environments where doors, shelves, and trim can see occasional moisture, such as kitchen and bath cabinetry or utility areas. Its very high tensile strength supports joints in components that may be pulled or stressed in normal operation, such as hinged fronts and frequently handled panels. The 16 oz canister size supports repeat use in shops that need a dedicated melamine glue while still being manageable for jobsite carry.
The listed open time of 10-15 minutes means Roo Clear Melamine Adhesive can be applied and parts positioned with some flexibility, supporting careful layout of PVC edgebanding or laminate sections without immediate lock-up. The assembly time range of 30-90 minutes sets expectations for how long parts should stay at rest so the glue line can establish strength before moving assemblies to the next station. The application temperature requirement above 45 F defines conditions under which the adhesive is designed to perform, helping keep cure behavior predictable in typical shop climates. With a viscosity of 4,850 cps, the adhesive spreads with body across melamine, vinyl, and similar surfaces, which supports a consistent film thickness and helps limit squeeze-out running across finished faces. Combined with the clear, quick-drying bond, these properties support repeatable, clean joints across multiple identical parts.
Roo Clear Melamine Adhesive is described for use on melamine, vinyl, laminate, PVC edgebanding, wood veneer, and acrylics, so it serves multi-material cabinet and panel work using those surfaces.
The adhesive dries quickly to produce a clear bond, which helps exposed edges, joints, and seams look cleaner and reduces visible glue lines on finished pieces.
The 10-15 minute open time means the adhesive stays workable on the surface during that interval, allowing spreading and part positioning before it begins to set.
The specified assembly time of 30-90 minutes indicates how long parts should remain in position so the Roo Clear melamine adhesive can develop strength before handling.
The adhesive is specified for application above 45 F, so use in environments meeting that minimum temperature supports the intended curing behavior.
The 4,850 cps viscosity gives the melamine glue a thicker body that spreads evenly and tends to stay where applied on melamine, vinyl, and similar surfaces.
Roo Clear melamine adhesive from Roo Products provides a clear, quick-drying bond on melamine, vinyl, laminate, PVC edgebanding, wood veneer, and acrylics, so one 16 oz canister can support varied cabinet and panel tasks. Its water resistant, very high tensile strength bond adds durability where joints face everyday stress. Defined open time, assembly time, and application temperature help plan glue-ups around a predictable workflow. Order this melamine adhesive from Wurth Baer Supply to support precise, clean bonding across your next run of melamine and laminate components.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  ROR1G4 Mfr# R-PAL | Melamine Glues RooClear - White, 1 Gallon | ||||
Sold in: 1 Each | ROR5G1 Mfr# R-5GL | Roo Clear® Melamine Adhesive, Clear, 5 Gallon Pail |
