
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Porter Cable PNS18100 staples are 18 gauge fasteners with a 1/4 inch crown and 1 inch length, so they suit fine woodworking where a small, controlled staple profile is useful for appearance and fit. These staples are classified as staples in the fasteners category, which places them in the same product family installers already use for fastening sheet goods and trim to wood substrates. The stated applications of casebacks, pre-hung door and window units, paneling, interior trim, underlayment, drawers, lattice, moldings, door and window casings, cabinet assembly, glue blocks, backs, and cabinet box assembly show that a single staple size covers many common shop and jobsite fastening tasks. The product is sold in full box quantities only, which lets shops stock a consistent staple for repetitive cabinet and trim work without mixing partial lots.
These Porter Cable 18 gauge x 1/4 inch crown x 1 inch staples are described as fitting tools such as the Senco Finish Pro 2N1, LN4450, KMN4450M, SLS25XP, SLS20L, SLS15L, SLS18L, SLS18NR, SKS-L, Porter Cable NS150A and NS100, and Fasco F21P 90-250A, F21T 90-40A, F3C 90-40CT and similar models, which ties staple size and collation to widely used staplers in shops and on jobsites. The Porter Cable Corporation branding identifies the staple source, which matters where installers want fasteners matched to known tool and fastener lines.
The listed applications of casebacks, backs, and cabinet box assembly show these Porter Cable PNS18100 staples working directly in cabinet carcass construction, so one staple format can handle back panels and glue blocks. Their role in drawers, interior trim, moldings, and door and window casings links this staple size to light finish carpentry, where controlled penetration and smaller staple geometry help with appearance on visible faces. The mention of underlayment, paneling, and lattice indicates that the 1 inch leg and 18 gauge combination suits attaching thin sheet goods and light stock over broader surfaces, so installers can move between flooring underlayment and wall panel work with the same staple size.
The 18 gauge designation combined with the 1/4 inch crown describes a fastener that balances holding power with a relatively small footprint, which helps maintain material integrity when working near edges on trim, paneling, or drawer parts. The 1 inch length allows the staple legs to pass through common back or panel thicknesses and engage underlying framing or cabinet sides, supporting tight cabinet box assembly and caseback retention under normal service loads. Fit to tools such as Senco Finish Pro 2N1, multiple Senco SLS and SKS-L models, Porter Cable NS150A and NS100, and several Fasco models ties the fastener geometry to specific stapler lines, which supports consistent driving depth and alignment from one installation to the next when those tools are used.
Porter Cable PNS18100 staples are 18 gauge with a 1/4 inch crown and 1 inch length, so they suit many cabinet, trim, and panel fastening tasks using that specific size.
Porter Cable PNS18100 staples are listed for casebacks, pre-hung door and window units, paneling, interior trim, underlayment, drawers, lattice, moldings, door and window casings, cabinet assembly, glue blocks, backs, and cabinet box assembly.
Porter Cable PNS18100 staples fit tools such as Senco Finish Pro 2N1, various Senco SLS and SKS-L models, Porter Cable NS150A and NS100, Fasco F21P 90-250A, F21T 90-40A, F3C 90-40CT, and similar models.
Porter Cable PNS18100 staples are specified for cabinet assembly, glue blocks, backs, and cabinet box assembly, so their size and holding power are aligned with typical cabinet carcass construction.
Porter Cable PNS18100 staples are described for interior trim, moldings, and door and window casings, so their 18 gauge, 1/4 inch crown design matches light finish carpentry needs.
Porter Cable PNS18100 staples are sold in full box quantities only, which supports stocking a consistent fastener size for ongoing cabinet, trim, and panel projects.
Porter Cable PNS18100 staples combine 18 gauge wire, a 1/4 inch crown, and 1 inch length with stated applications from casebacks to interior trim and cabinet box assembly, so a single staple format can cover much of a woodworking or finish carpentry workload. Fit to staplers such as Senco Finish Pro 2N1, Senco SLS and SKS-L models, Porter Cable NS150A and NS100, and several Fasco tools links the fastener to commonly used equipment. When cabinet, paneling, or underlayment jobs call for this 18 gauge 1 inch pattern, these staples match that requirement.
Sold In: 1 Package