Post Hangers 4" Length x 11/16" Width - 1 Set

Post Hangers 4" Length x 11/16" Width For Stable Joints

Post Hangers 4" Length x 11/16" Width are panel assembly fittings from S Parker Hardware Mfg. Corp. that create repeatable connections on beds, booths, removable partitions, shelf brackets, and similar projects, so structural joints align consistently along the 4 inch length.

These post hangers belong to the Panel Assembly Hardware family, so they serve as a core structural link between components wherever panels or posts meet, which helps keep multi-part assemblies located in a predictable position.

The hangers are described at 4 inch length and 11/16 inch width, so the bearing area spreads load across a controlled footprint, which helps reduce point stress at the mounting interface on wood or panel members.

Each set is identified as Post Hangers 4" Length x 11/16" Width - 1 Set, so a single order provides a matched arrangement sized for one assembly location, which keeps layout uniform from side to side on that job.

The product is listed under SAP description POST HANGER, 4', tying this set directly to Wurth Baer Supply inventory, which simplifies reordering when a shop standardizes on this specific 4 inch pattern.

Key Panel Assembly Details That Support Your Build

• The product is categorized as Panel Assembly Fittings, so it is designed specifically to connect posts or panels, which helps installers treat it as structural layout hardware rather than decorative trim.
• The Web Description notes use on beds, booths, removable partitions, and shelf brackets, so one hanger style covers several common interior build-ups, which helps shops reduce SKU variety across projects.
• The set is associated with S Parker Hardware Mfg. Corp., so all components follow that manufacturer pattern, which supports consistency when matching hangers across multiple units in a run.
• The Recommended Fasteners reference GF81005 in 3/4" x 8 flathead format, so mounting is tied to a known screw specification, which supports predictable pull-out performance in typical woodworking substrates.
• The Category designation as Fasteners|Panel Assembly Hardware links these hangers to the broader fastening system, which helps planners align this part with existing fastener choices on the same job.

Post Hanger Installation And Fastener Alignment Notes

The Web Description lists Recommended Fasteners GF81005 at 3/4" x 8 flathead, so the screw length and head style are defined for these post hangers, which lets installers drill and countersink for that format and keep each mounting point seated properly.

The set is described as 4 inch long by 11/16 inch wide, so screw rows can be laid out along that 4 inch span, which gives room to space fasteners for good holding without crowding edges on narrow posts or frames.

The Category as Panel Assembly Hardware shows these parts are intended for structural joining, so installers can align hangers at matching heights on mating pieces, which helps the male and female elements engage smoothly during assembly.

The SAP description POST HANGER, 4' ties directly to the 4 inch length mentioned in the product name, so drawings and cut lists that specify a 4 inch hanger can reference this identifier, supporting consistent placement from unit to unit.

Using KD1614 Post Hangers In Real Projects

Where KD1614 Post Hangers Fit Best

The Web Description states these post hangers are for beds, booths, removable partitions, and shelf brackets, so they are suited to interior projects where components need to engage in a repeatable position, keeping frames and panels aligned at each connection point.

Because the product sits in the Panel Assembly Fittings class, it is aimed at situations where posts, frames, or panels must lock together as part of a larger assembly, such as bed ends meeting side rails or partitions locating into fixed framing, which supports standardized joinery across that product line.

The 4 inch length specified in the product name gives a defined engagement zone along the joint, so when hangers are placed vertically or horizontally, they provide a consistent alignment reference over that 4 inch run, stabilizing the mating pieces in use.

The 11/16 inch width noted in the product name defines how much surface the hanger occupies on the edge or face of a member, so designers can work this width into rail or stile dimensions, maintaining adequate edge distance while preserving desired visual proportions.

The SAP description POST HANGER, 4' links the product into Wurth Baer Supply systems, so project documentation can call out KD1614 by that description, helping purchasers and shop staff align ordering with what the drawings specify when repeating the same design.

Why These S Parker Details Support Repeatable Results

The brand S Parker Hardware Mfg. Corp. is attached to the product name, so the male and female components are built as a matched system from one source, which supports precise engagement between the pieces across multiple units in a production run.

The Web Description states each set has 4 male and 4 female pieces, so one set supplies four matched connection points, allowing a builder to create several joints or reinforce a single joint at multiple locations, which can distribute load along a frame section.

The Recommended Fasteners listing of GF81005 3/4" x 8 flathead ties the hanger directly to that screw size and style, so shops can base drill patterns and bit depth on this specification, helping keep fastening consistent across different installers and shifts.

The Category Fasteners|Panel Assembly Hardware places this item within Wurth Baer Supply fastener families, so specifiers can pair these hangers with other fastener items on the same order, aligning inventory under one source and simplifying job staging at the bench.

The note "Packing: 4 posts per set" in the Web Description indicates how the hanger components are grouped under this part, so when design calls for several joints, planners can quickly calculate the number of sets required to match the number of intended post locations.

The Manufacturer Part # KD1614 provides a stable identifier beyond descriptive names, so shop drawings and CAD libraries can reference KD1614 directly, helping fabrication teams repeat the same hanger choice whenever a similar bed, booth, or partition detail is reused.

Common KD1614 Post Hanger Questions From Installers

Select KD1614 Post Hangers For Your Next Assembly

The Post Hangers 4" Length x 11/16" Width - 1 Set from S Parker Hardware Mfg. Corp., identified as KD1614, tie directly into Wurth Baer Supply fastener and panel assembly lines, aligning your beds, booths, partitions, or shelf brackets with a defined 4 inch hanger standard.

With 4 male and 4 female pieces per set and recommended GF81005 3/4" x 8 flathead fasteners, these panel assembly fittings let your team design around known dimensions and screw patterns, so multi-piece wood or panel structures locate consistently from build to build.