KV8525 16" Over Travel Hold-in anti-rebound Ball Bearing File Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8525P 16
Description
16 Inch Over Travel File Drawer Slide Function
16 inch over travel file drawer slide describes a Knape and Vogt 8525 Series side mount ball bearing file drawer slide in a 16 inch length, so file drawers can open past the cabinet front for easier access to rear folders and contents. The slide provides 1-1/4 inch overtravel, which lets the drawer clear the cabinet face more fully, helping users see and reach hanging files without shifting them forward. Side clearance is 1/2 inch plus 1/32 inch minus 0 inch on each side, giving installers a defined gap to build into cabinet and drawer widths for a consistent fit. The slide height is 3-51/64 inch including the quick disconnect rail, which determines how the slide fits in taller file drawer side panels and case openings. Progressive movement on ball bearings guides the drawer members smoothly, which helps drawers move quietly and track straight under normal office or shop loading.
Key Drawer Slide Details That Support Work
- Hold-in feature prevents bounce back at closure, so drawers stay shut against their stops in typical office and cabinet use.
- Positive in and out stops control travel limits, so drawers do not overextend or rack past the designed opening range.
- Metal ball retainer holds 3 bearings per inch, which supports smooth, quiet motion along the entire stroke under regular service.
- Extended Z-plate made from high strength steel alloy supports the slide profile, which helps the assembly handle file drawer duty.
- Direct access mounting holes and 32 mm pattern provide clear screw locations, which speeds installation layout in cabinet sides.
- Non-handed quick disconnect drawer members allow drawer removal from either side, which simplifies installation and later casework adjustments.
Side Mount And Fastening Details For Fit
This 8525 Series product is a side mount drawer slide, so it locates on the drawer and cabinet sides for file drawer applications. The 1/2 inch plus 1/32 inch minus 0 inch side clearance per side sets the relationship between drawer width and opening, guiding cabinet construction or retrofit sizing. The height of 3-51/64 inch including the quick disconnect rail affects how the slide sits relative to the drawer bottom and top rails. Recommended fasteners are #7 x 5/8 inch Phillips pan head screws, which fit the direct access mounting holes and support secure attachment to case sides. Non-handed quick disconnect drawer members allow the installer to mount slides, then separate and reattach the drawer section during fitting without left or right specific parts.
Using This Knape And Vogt 8525 Drawer Slide
Where The 8525P 16 Drawer Slide Performs Best
The Knape and Vogt 8525P 16 drawer slide is described as a file drawer slide, so it suits applications where drawers carry hanging files or similar office contents. Its side mount configuration places the hardware on the drawer sides, freeing the bottom area for file rails and folder movement. The 1-1/4 inch overtravel allows the drawer front to move past the cabinet face, which helps users see tab labels and reach items stored at the very back of the drawer. Height of 3-51/64 inch including the quick disconnect rail provides a tall slide profile, which aligns well with deeper file drawer sides found in many commercial and residential cabinets. The product is identified under category Drawer Slides & Accessories|Side Mount, Ball Bearing Slides, tying it to installations where ball bearing guidance and side mounting are preferred.
Details That Help Repeatable Installations And Motion
The hold-in feature is designed to prevent bounce back when the drawer reaches the closed position, so drawers stay seated against positive in and out stops instead of drifting open after use. Positive in and out stops limit travel at both ends, which protects the slide from overextension and keeps drawers aligned with the cabinet face and interior stops. The metal ball retainer that holds 3 bearings per inch distributes bearings along the raceways, which supports smooth and quiet motion as the slide cycles under regular service loads. An extended Z-plate formed from high strength steel alloy strengthens the slide profile, giving the assembly structural support appropriate for file drawer duty. Direct access mounting holes and the presence of a 32 mm pattern give clear, repeatable screw positions, supporting faster production layout and consistent alignment in casework built around the 32 mm system. Non-handed quick disconnect drawer members simplify removal and reinstallation from either side, which supports adjustments, service, or drawer modification without tracking left and right parts separately. Progressive movement on ball bearings coordinates the slide members as the drawer opens, creating a controlled action that helps drawers feel uniform across multiple cabinets when the same slide is used.
Common Questions About This 16 Inch Slide
What type of drawer slide is the 8525P 16?
The 8525P 16 is a Knape and Vogt 8525 Series side mount ball bearing file drawer slide, so it mounts on drawer sides and uses ball bearings for guided motion.
How much overtravel does this drawer slide provide?
The 8525P 16 provides 1-1/4 inch overtravel, which lets the file drawer open past the cabinet face for better access to rear hanging files.
What side clearance does this slide require?
The 8525P 16 requires 1/2 inch plus 1/32 inch minus 0 inch side clearance per side, guiding the needed difference between drawer width and cabinet opening.
What is the height of the 8525P 16 drawer slide?
The 8525P 16 has a height of 3-51/64 inch including the quick disconnect rail, which affects vertical positioning on drawer sides.
Which fasteners are recommended for mounting this slide?
The 8525P 16 uses recommended #7 x 5/8 inch Phillips pan head screws, matching the direct access mounting holes for secure side attachment.
How does the hold-in feature affect drawer use?
The 8525P 16 hold-in feature helps prevent drawer bounce back at closure, so drawers stay fully closed after being pushed to the stops.
Selecting This Slide For File Drawer Projects
The Knape and Vogt 16 inch over travel file drawer slide 8525P 16 pairs 1-1/4 inch overtravel with side mount ball bearing construction, which supports file drawer access beyond the cabinet face. Defined side clearance, 3-51/64 inch height, and a 32 mm pattern give builders concrete dimensions for cabinet layout and drilling. The hold-in feature, positive in and out stops, and metal ball retainer with 3 bearings per inch support smooth, controlled motion suited to file drawer service. For projects using high strength steel alloy side mount ball bearing slides in file drawer applications, this 8525 Series model provides a clearly specified option.
