2017 Pin/Disc Tumbler Trim Ring, Satin Chrome, Keyed-Alike

2017 Pin/Disc Tumbler Trim Ring For Clean Lock Edges

2017 pin/disc tumbler trim ring describes a CompX National trim bezel designed to finish the edge around a lock mounting hole. The 7/8 inch diameter ring surrounds the lock body at the panel surface, giving a defined edge around the bored opening. The satin chrome finish matches satin chrome lock fronts visually, so the lock and trim read as a single, consistent piece on the door or drawer face. As a trim bezel in the Locks and Latches category, it works with lock installations where the exposed hole edge would otherwise remain visible. Used around bored mounting holes, this ring masks the edge of the cut, presenting a more controlled appearance on cabinets and similar woodworking projects.

Key Trim Ring Details For Lock Installers

• The 7/8 inch diameter size sets the visible footprint around the bored mounting hole, so the ring covers the cut while keeping the opening compact on the work surface.
• The satin chrome finish coordinates with satin chrome lock components, helping the installation present as a matched hardware set on the finished face.
• The trim ring is used to cover ragged edges around bored mounting holes, so rough or chipped drill cuts are concealed once the lock cylinder is installed through the opening.
• Placement around the lock cylinder defines the transition from lock body to panel surface, so the hardware-to-wood interface looks intentional instead of like a raw bore.
• As a trim bezel in the Locks and Latches lock accessories class, it serves as a finishing piece around compatible lock bodies, supporting a cleaner, more professional-looking installation.

Trim Ring Mounting Around Bored Lock Holes

The trim ring is used around bored mounting holes, so it works where a round hole is drilled through a cabinet or panel for a lock cylinder or similar hardware. Its 7/8 inch diameter is sized to sit on the face around that drilled opening, letting the lock body pass through the center while the outside edge hides drill breakout or chipping. The satin chrome finish is suited to installations using satin chrome lock components, so the ring does not visually interrupt the lock face. As a trim bezel, it functions as the visible border between the lock and the panel surface during normal use.

How This Satin Chrome Trim Ring Fits Real Jobs

Using The C2017-26D Trim Ring In Lock Work

The manufacturer part number C2017-26D identifies this 2017 pin/disc tumbler trim ring from CompX National, so it can be specified precisely when matching existing hardware schedules or replacing damaged trim. Installed around the bored mounting hole, the ring frames the lock on cabinet doors, drawers, or panels that carry CompX National pin/disc tumbler style locks. The 7/8 inch diameter gives enough coverage to hide typical boring marks while keeping the visible metal ring reasonably compact on furniture or fixture faces. Because it is classed as a trim bezel in lock accessories, its role is to finish the lock opening visually rather than change how the lock functions in the casework.

Why Diameter And Finish Matter For Consistent Results

The 7/8 inch diameter dimension directly affects how much of the surrounding panel surface is covered, so installers can anticipate how well the ring will hide ragged edges around bored mounting holes on doors or drawer fronts. When a drilled hole leaves a chipped or slightly oversized edge, the ring overlaps that imperfect area, helping the finished job look controlled even when the bore was made quickly in the shop. The satin chrome finish ties into satin chrome lock faces from CompX National, keeping color and sheen aligned across the installation. As a trim bezel in the Locks and Latches category, it defines a clear metal border around the lock body, which can help visually separate hardware from laminate, veneer, or painted surfaces in commercial and residential woodworking environments.

Common Questions About The C2017-26D Trim Ring

Selecting This Trim Ring For Satin Chrome Lock Work

The 2017 pin/disc tumbler trim ring from CompX National combines a 7/8 inch diameter with a satin chrome finish to tidy up bored mounting holes used for locks. On cabinet and woodworking jobs that call for satin chrome lock hardware, this trim bezel covers ragged bore edges and frames the cylinder for a more controlled presentation. For projects built around CompX National lock components, specifying part C2017-26D keeps the trim detail consistent wherever a 7/8 inch diameter ring is needed around the lock opening.