
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2 x 2 steel corner brace describes a stamped steel brace sized for 2 inch by 2 inch applications, so it suits projects that call for that footprint at corners or joints. The zinc plated finish on this Knape and Vogt brace adds a protective layer over the steel, helping the metal stand up better in typical shop and jobsite environments. The stamped steel construction gives a consistent profile, which helps joints sit tight and repeatable when building multiple units. This brace falls under corner braces and glue blocks, so it fits work where you need added mechanical support alongside adhesives. The manufacturer part number 342 ZC identifies this exact zinc corner brace pattern, which matters when matching to drawings or reordering for ongoing production. Wurth Baer Supply offers it in full box quantities, which aligns with cabinet shop and woodworking runs where you plan for multiple installation points.
This Knape and Vogt 2 x 2 steel corner brace uses 3/4 inch x #10 flathead wood screws, so the countersunk holes are designed for that screw size to sit properly in wood. That detail supports clean seating of the screw head, which helps the brace draw tight to the surface without protrusions at the joint. The 2 inch by 2 inch layout sets the leg length, letting you plan brace locations in cabinet corners, face frame connections, or general woodworking where that reach is appropriate. Because the brace is stamped steel with a zinc plated finish, it combines a consistent profile with a coated surface, which suits routine woodworking assembly environments where you want predictable fit and straightforward mounting.
This 2 x 2 steel corner brace is categorized under corner braces and glue blocks, placing it alongside components used to reinforce wood joints. That classification fits work such as cabinet carcasses, light frames, or other woodworking where you pair mechanical fastening with adhesive. The use of 3/4 inch x #10 flathead wood screws means the brace is aimed at wood substrates, from cabinet-grade plywood to solid stock in typical shop construction. Its 2 inch by 2 inch size gives enough length on each leg to bridge a corner joint in these assemblies while staying compact for interior spaces. Because it is a stamped steel part, each brace presents the same geometry, which suits fixture-based building or repeat runs where you want corner hardware to drop into the same position every time.
The stamped steel construction of this corner brace provides a uniform profile from piece to piece, which supports jigs, stops, or templates built around its 2 inch by 2 inch footprint. That uniformity translates into faster layout when scaling up production or repeating cabinet designs. The zinc plated finish adds a coating to the steel that helps the surface hold up in typical interior woodworking conditions, keeping the brace serviceable while assemblies move through the shop or into finished installations. The specified 3/4 inch x #10 flathead wood screw size gives you a defined fastener geometry, aligning the countersunk holes with a standard screw head for flush seating against the brace. Sourcing this Knape and Vogt 342 ZC brace from Wurth Baer Supply in full box quantities lets woodworking operations plan hardware usage around consistent stock levels for ongoing or repeat projects.
The corner brace is specified as 2 inch x 2 inch, so each leg extends 2 inches, which helps size its coverage in cabinet corners or other wood joints.
The brace is stamped steel with a zinc plated finish, combining a consistent steel shape with a coated surface suited to typical woodworking environments.
This corner brace uses 3/4 inch x #10 flathead wood screws, so the holes and countersinks are designed to seat that screw size flush in wood.
The 342 ZC designation is the manufacturer part number for this specific 2 inch x 2 inch stamped steel corner brace with zinc plated finish.
The brace falls under corner braces and glue blocks, indicating its role in reinforcing wood joints alongside adhesives in cabinets and similar projects.
Wurth Baer Supply sells this Knape and Vogt 2 x 2 steel corner brace in full box quantities only, matching production needs for multiple assemblies.
The Knape and Vogt 2 x 2 stamped steel corner brace with zinc plated finish and 3/4 inch x #10 flathead wood screw specification gives you defined geometry, material, and mounting details. For cabinet, frame, or general woodworking projects that call for a 2 inch by 2 inch corner brace profile, choosing this 342 ZC model from Wurth Baer Supply lets you align part numbers, screw sizing, and finish across your assemblies.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each | GF81005 Mfr# 81005-43 | Grass #8 x 3/4" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 81005-43 - 500/Box |