Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt recessed pull gives a low-profile grip for doors or panels where a flush surface matters, so the pull does its job without projecting into the walkway or work area. As part of the Recessed Pull Series, this unit is designed as a built-in handhold, which keeps the front face of the surface neat for cabinets, panels, or similar millwork. The solid brass construction provides a metal body that stands up to repeated handling, which is important on doors that see constant daily use. Its dull brass finish delivers the brass look without a bright shine, which helps the pull visually blend into traditional or understated designs. The rectangular size of 1-3/4 x 3-1/4 x 9/16 deep defines the hand opening and recess depth, so installers can plan a consistent mortise or routed pocket across multiple openings.
The 9/16 inch deep profile means the pull nests into a routed or mortised cavity, so the face sits flush and does not protrude beyond the surrounding surface. Its 1-3/4 inch by 3-1/4 inch face gives clear layout dimensions for marking the cutout in cabinet doors, panels, or similar workpieces. The listed screw size of 8-32 x 1 inch specifies the machine thread and length used to secure the pull, which guides drilling for proper pilot holes and thread engagement. With the body formed from solid brass, the mounting points are integrated into a single metal piece, which supports repeated tightening during installation or future adjustments. The dull brass finish on the exposed face maintains a consistent appearance around the mounting openings, so fastener heads visually coordinate with the pull itself.
This recessed pull from Knape and Vogt fits projects that call for a shallow, built-in grip instead of a projecting handle, such as cabinet doors or sliding-style panels where clearance is limited. Its 1-3/4 inch by 3-1/4 inch size fits comfortably on many door and panel proportions, which helps maintain balanced sightlines on face frames or slab fronts. The 9/16 inch deep recess suits standard door and panel thicknesses where a moderate pocket depth is appropriate, giving enough grip space without weakening the material more than necessary. Because the pull is made from solid brass with a dull brass finish, it aligns visually with other brass hardware on furniture, cabinetry, or architectural millwork that favors a softer sheen. The rectangular form also lends itself to linear layouts, supporting runs of multiple pulls with consistent spacing.
The defined 1-3/4 inch by 3-1/4 inch opening helps installers produce repeatable cutouts, which reduces layout time when multiple doors or panels must match. The 9/16 inch depth creates a predictable recess profile, so routing jigs and stops can be set once and used throughout a job. Solid brass construction keeps the pull body rigid during fastening, which helps keep the face flush against the mortise edges as screws are brought up to final torque. The dull brass finish provides a uniform surface tone around the grip area, which helps minor handling marks blend during normal service. With a specified 8-32 x 1 inch screw size, installers know the thread and length relationship to the pull body, aiding in selecting appropriate pilot hole diameters and maintaining secure attachment. The Knape and Vogt Recessed Pull Series designation identifies it as part of a coordinated line, which assists in planning consistent hardware aesthetics across related pieces.
The Knape and Vogt recessed pull measures 1-3/4 inches by 3-1/4 inches and is 9/16 inch deep, which defines the mortise size and depth needed in the door or panel.
The 819X BR recessed pull is 9/16 inch deep, so the routed or mortised pocket must match this depth for the pull face to sit flush with the surface.
The recessed pull is made from solid brass, giving it a full metal body that supports repeated gripping and fastening in cabinet or panel applications.
This Knape and Vogt recessed pull uses a dull brass finish, providing a muted brass appearance that coordinates with other similar-tone hardware.
The recessed pull is specified with an 8-32 by 1 inch screw size, indicating the machine thread and length used to secure it to the workpiece.
The 819X BR recessed pull is part of the Recessed Pull Series from Knape and Vogt, which supports coordinated use across related cabinets or panels.
The Knape and Vogt recessed pull in dull brass combines a 1-3/4 by 3-1/4 inch footprint with a 9/16 inch recess depth, giving clear layout guidance for doors and panels. Its solid brass construction and defined 8-32 by 1 inch screw size support dependable fastening in woodworking or cabinet projects. When a low-profile brass grip is needed that aligns with the Recessed Pull Series look, this 819X BR pull offers consistent dimensions for repeatable installation. Choose it where a recessed handhold and muted brass appearance are part of the design plan.
Sold In: 1 Each
