Camar 806 Hanging Rail Bracket with White Cover Cap, 220 lb per pair Left Hand, Screw Mount,806-14-SX

806 Series Hanging Rail Bracket For Rail Mounting

806 Series Hanging Rail Bracket is a screw mount component in the Camar 806 wall hanging rail system, so it supports cabinet or closet installations that rely on a structural rail. This left sided bracket is used to hang on hanging rail part number CM875-Z1-24, which defines the rail interface and keeps the install tied to a known mating profile. The bracket offers weight capacity of 220 lb per pair, giving the rail system a clearly rated load for typical residential cabinet or closet runs. A white cover cap is part of this bracket design, so the connection point to the rail presents a finished white look once mounted. As part of the Shelf, Closet & Garage Organization category and Closet Bracket & Rail Systems class, this bracket fits into rail-based wall mounting layouts used by professional installers and serious DIY users.

Rail Bracket Details That Support Daily Use

• This Camar 806 Series bracket is part of a wall hanging rail system, so it works as the link between the cabinet or carcass and the structural rail, which simplifies layout in closet and cabinet projects.
• The design is left sided, so it locates on the left side of the assembly in relation to the hanging rail, helping keep rail connections consistent with the intended orientation.
• The bracket is used to hang on hanging rail part number CM875-Z1-24, so the installer works with a defined rail profile and avoids guessing at mating geometry during layout.
• Weight capacity is 220 lb per pair, so paired brackets provide a clear load rating when planning cabinet size, spacing, and fastener patterns relative to the rail.
• The bracket features a white cover cap, so the visible portion of the rail connection presents a clean white finish that blends into many cabinet and closet interiors.
• This component sits within Closet Bracket & Rail Systems, so it integrates into rail-based wall mounting schemes common in organized storage and garage layouts.

Screw Mount Bracket Setup And Adjustment Range

This Camar bracket is a screw mount design, so it fastens to the cabinet or structure with screws, creating a rigid link between the case and the hanging rail. Once mounted, the adjustment range of 25 mm left and right lets the installer shift the cabinet or element along the rail interface, which helps fine-tune horizontal positioning relative to adjacent units or walls. An additional 28 mm up and down adjustment allows vertical tuning at the bracket, supporting alignment of reveals and level runs without re-drilling the rail. Together, the screw mount attachment and these adjustment ranges streamline final positioning after the rail is anchored, which is useful when cabinets, closets, or similar elements must line up cleanly along a wall.

Using This Camar Hanging Rail Bracket In Projects

Where This Left Sided Rail Bracket Is Applied

This Camar 806 Series hanging rail bracket belongs to a Wall Hanging Rail System, so it plays a specific role in rail-based mounting of cabinets, closets, or storage components. The part is identified as a left sided bracket, so it is positioned on the left side of an assembly where the cabinet or carcass meets the hanging rail. Because it is used to hang on hanging rail part number CM875-Z1-24, this bracket is tied to that specific rail in closet bracket and rail systems. In Shelf, Closet & Garage Organization projects, this combination creates a structural line along the wall, and the bracket functions as the connector that transfers load from the cabinet into the rail. The white cover cap keeps the exposed interface aligned with white interiors or trim commonly specified in closets and similar storage runs.

How Adjustment And Load Rating Support Consistent Results

The 220 lb per pair weight capacity gives a clear structural reference when this bracket is used in a run of wall-mounted cabinetry or closet elements, so loading plans can respect the limits of the hardware as part of the overall design. The screw mount configuration locks the bracket to the cabinet side or back, and the connection to the CM875-Z1-24 hanging rail then carries the load into the wall structure through the rail. With 25 mm left and right adjustment, the installer can nudge cabinets along the rail plane to close small gaps or align doors across multiple boxes without relocating the rail. The 28 mm up and down adjustment lets the bracket shift vertically relative to the rail, which supports accurate leveling and reveal alignment when multiple units share the same hanging line. Together, these adjustment options reduce rework at the rail and help produce straight, consistent cabinet or closet runs.

Common Questions About This Camar Rail Bracket

Select This Bracket For Rail-Based Cabinet Mounting

The Camar 806-14-SX 806 Series Hanging Rail Bracket combines screw mount attachment, defined adjustment ranges, and a 220 lb per pair load rating to support rail-based cabinet and closet layouts. Its left sided design, match to hanging rail CM875-Z1-24, and white cover cap make it a practical choice when building organized wall runs that need reliable positioning and a clean finished appearance.