24" KV80 Standard-Duty Shelf Standard, Black Finish 10/Box

24 Inch KV80 Shelf Standard For Adjustable Shelves

24 inch KV80 shelf standard gives you a standard-duty upright for adjustable shelving runs where a 24 inch length fits the layout. Knape and Vogt identifies this upright as model KV80, so it matches their established standard-duty system for closets, cabinets, and general storage builds.

The manufacturer part number 80 BLK 24 specifies the KV80 pattern in a black finish at a 24 inch length, which helps keep ordering consistent whenever you repeat this layout on future projects or need to match existing uprights in the same installation.

The KV80 design is typically used with KV180, KV181, KV160, or KV179 series brackets, so the bracket lugs and slots are engineered to work together in that system, keeping shelf engagement predictable from one position to the next.

The upright is made from 16-gauge steel, so it provides a solid, standard-duty track for those brackets while you are laying out adjustable shelves in closets, garages, or cabinet interiors.

Key KV80 Standard Features That Support Layout

• The shelf standard is 5/8 inch wide and 13/32 inch deep, so it sits close to the mounting surface and helps you plan face-frame reveals or panel clearances when you tuck it into cabinet or closet side panels.
• Adjustment slots are laid out in 1 inch increments, which lets you move KV180, KV181, KV160, or KV179 brackets up or down in predictable steps so you can align multiple shelves across a run without re-measuring each position.
• Screw holes are spaced 12 inches apart on center along the upright, so you have regular fastening points when locating into studs or a substrate, which supports even load transfer along the 24 inch length.
• The upright uses 16-gauge steel, which provides a sturdy track for standard-duty shelving where you want a metal standard that resists flexing in normal closet and storage applications.
• The black finish on the 80 BLK 24 standard provides a dark, uniform look that pairs with black brackets and other dark hardware where you want the hardware to visually recede behind the stored items.

Installation Details For 80 BLK 24 Shelf Standards

The 24 inch KV80 shelf standard has screw holes spaced 12 inches apart on center, giving you two primary fastening points along its length, which simplifies layout when you are aligning several uprights over studs or backing.

Recommended fasteners for this standard are KV80-80 screws (sold separately), so the hole size and countersink are matched to that screw pattern, which supports consistent seating of the standard against wood or panel substrates.

The 5/8 inch width and 13/32 inch depth give you known dimensions at the edge of the upright, so you can plan out reveals from the cabinet front or closet face and maintain a straight reference line when snapping chalk lines or using a level.

Because the KV80 pattern is typically used with KV180, KV181, KV160, or KV179 series brackets, the slot geometry is set for those bracket hooks, which helps brackets sit fully in the slots when you load the shelves in service.

Using The KV80 Shelf Standard In Shelf Runs

Where This 24 Inch KV80 Standard Fits Best

The 24 inch KV80 shelf standard in black works in closet, cabinet, or garage layouts where a 24 inch vertical range provides sufficient adjustment, so it suits single-shelf applications or shorter sections under windows or soffits.

Knape and Vogt lists available KV80 lengths at 12, 18, 24, 36, 48, 60, 72, 84, and 96 inches, and the 24 inch version sits toward the shorter end of that range, which can help when you need adjustability without running a full-height upright.

The KV80 design is typically used with KV180, KV181, KV160, or KV179 series brackets, so once this upright is in place, you can select from those bracket families to support different shelf depths while keeping the same vertical track.

The black finish on part 80 BLK 24 ties into installations that use black brackets or other black closet hardware, which is useful when you want the hardware to visually blend with dark shelving or contrast against lighter wall surfaces.

Details That Support Repeatable KV80 Shelf Alignment

The KV80 shelf standard adjusts in 1 inch increments, so every bracket position moves in predictable 1 inch steps, which simplifies aligning multiple shelves in a bank of uprights because each slot index corresponds directly across the run.

The 5/8 inch width creates a consistent reference edge against the side of a closet or cabinet, which helps when you are setting reveals from the front edge of a panel and want each upright to land the same distance from the opening.

The 13/32 inch depth keeps the upright relatively low-profile into the cabinet or closet interior, which allows shelving and contents to occupy more of the space while the standard still provides a secure track for the brackets.

Screw holes at 12 inches on center along the 24 inch length place a fastener near each end of the upright, which supports the load path from brackets into the stud or backing, helping the track remain tight against the mounting surface over time.

The 16-gauge steel construction gives the standard rigidity as brackets are loaded and adjusted, which matters when shelves are moved or repositioned repeatedly within the 24 inch adjustment range during normal use.

Using the recommended KV80-80 screws (sold separately) matches the manufacturer-specified fastening pattern for this track, which helps the upright sit flat and keeps the slot alignment consistent when brackets are engaged and removed.

Common Questions About The 24 Inch KV80 Standard

Selecting The Right 24 Inch KV80 Standard

The 24 inch KV80 standard in black, part number 80 BLK 24, provides a defined 5/8 inch by 13/32 inch upright with 1 inch adjustment steps and 12 inch on-center screw holes, so it fits projects that need controlled shelf adjustment in a compact vertical span.

For jobs using KV180, KV181, KV160, or KV179 series brackets, this KV80 track ties directly into that bracket family, so selecting this upright aligns the slot geometry, bracket engagement, and black finish across the shelving run.