Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Gator-Ply backer is a low formaldehyde specialty engineered man-made wood fiber veneer that is impregnated with a proprietary resin system, so it provides a stable balancing layer that supports consistent panel performance in use. This specific Gator-Ply 306-04 backer in black measures 49 x 97, giving coverage sized for typical panel layouts where full sheets are needed for three-ply or five-ply builds. The .026 inch plus or minus .002 inch thickness keeps the backer thin while still functioning as a balancing medium, which helps maintain overall panel thickness targets. Because it is designed as a balancing medium in both three-ply and five-ply panel construction, it supports flatness and dimensional consistency across the panel build. The low formaldehyde design supports projects where reduced formaldehyde content in the balancing layer is important alongside decorative faces.
Gator-Ply backer is recommended for use with .030 HPL, giving a balancing layer that pairs with this laminate thickness in panel builds. It is also recommended for use with .050 HPL, so the same backer type can serve across different high-pressure laminate thicknesses in a shop workflow. Recommended use with straight grain wood veneer allows the backer to balance common veneer faces in three-ply construction. It is also recommended with fancy face veneer, supporting decorative work where the back must stabilize more valuable faces. Recommended use with reconstituted wood veneer aligns the backer with engineered veneer layups, helping maintain balanced construction across a range of surface options.
Gator-Ply backers are used as a balancing medium in both three-ply and five-ply panel construction, so they function as the counter layer that supports panel flatness relative to the decorative face. In three-ply construction hot or cold press, the backer provides the rear veneer layer opposite the face, helping distribute stresses from the adhesive and face material across the panel thickness. When used with .030 HPL, the backer participates in a laminate-balanced panel that can track the behavior of the HPL under normal service conditions. With .050 HPL, the same backer keeps the construction approach consistent across thicker laminates, supporting uniform practices in press layups. In veneer-based builds with straight grain wood veneer, fancy face veneer, or reconstituted wood veneer, the backer balances the differing face materials so panel makers can apply the same balancing concept regardless of the decorative selection.
The .026 inch plus or minus .002 inch thickness gives the Gator-Ply backer a defined gauge, which helps fabricators account for the backer in total panel thickness when matching adjacent components in an assembly. As a low formaldehyde specialty engineered man-made wood fiber veneer, the product aligns with projects where limiting formaldehyde contribution from the balancing sheet is part of the specification. The proprietary resin system used to impregnate the veneer creates a controlled substrate, supporting predictable behavior during hot or cold pressing cycles in three-ply construction. The black color on a 49 x 97 sheet provides a dark back surface across a full panel, which can help when casework or fixtures expose the back side to view. Because Gator-Ply Green Gator-Backer is an economic alternative to conventional wood veneers and high-pressure laminates manufactured with no added formaldehyde, it offers an additional option in the same product family when projects call for no added formaldehyde in the balancing layer.
The Gator-Ply 306-04 backer has a .026 inch plus or minus .002 inch thickness, so it serves as a thin balancing layer that contributes minimally to overall panel build height.
The Gator-Ply backer is used as a balancing medium in both three-ply and five-ply panel construction, helping counter the face material so the finished panel behaves more uniformly.
The Gator-Ply backer is recommended for use with .030 HPL and .050 HPL, so it supports balanced panel builds across these common high-pressure laminate thicknesses.
The Gator-Ply backer is recommended with straight grain wood veneer and fancy face veneer, letting it balance both basic and decorative veneer faces in panel work.
The Gator-Ply backer is recommended with reconstituted wood veneer, allowing it to serve as the balancing sheet in engineered veneer applications.
This Gator-Ply 306-04 backer is black and measures 49 x 97, providing a full-size dark back sheet suitable for large panel formats.
The Gator-Ply backer from 3 A Composites combines a low formaldehyde man-made wood fiber veneer with a proprietary resin system, giving panel builders a defined balancing medium for three-ply and five-ply constructions. Its .026 inch plus or minus .002 inch thickness, black 49 x 97 format, and recommended pairing with .030 HPL, .050 HPL, straight grain wood veneer, fancy face veneer, and reconstituted wood veneer allow one backer type to support multiple face options. For projects where consistent panel behavior and controlled formaldehyde contribution from the balancing layer are important, this Gator-Ply 306-04 backer provides a clearly specified option for production workflows.
Sold In: 50 Sheet