Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a steel side file rail from Grass's Pendaflex file hardware program, built to mount inside a Zargen drawer and carry hanging file folders. The 508.5mm (20-1/16 inch) length is sized for the Zargen platform's nominal drawer depth, and the White finish coordinates with white Zargen drawer interiors.
The most practical application for this rail is converting a deep Zargen drawer into a dedicated filing drawer — for a home office built on Zargen components, a design studio with base cabinets, or a shop where project paperwork needs its own dedicated slot. Because the rail length is matched to the Zargen system's nominal depth, it drops into an appropriately sized Zargen box without custom cutting or shimming. Pair two rails, one per side, and you have the running gear for a letter-size hanging file folder setup inside the drawer.
This is a bare rail, not a complete file drawer kit. To build a working file drawer, you also need the matching hanging rail brackets sized and styled for Zargen — confirm bracket compatibility with Grass before ordering, as Zargen-program components are not interchangeable with other systems' hardware.
The rail is steel, so it holds its shape under the loaded weight of a full drawer of hanging folders without flexing or sagging away from the wall. White is a factory-applied finish that reads as a neutral inside painted or white-laminate casework, keeping the filing hardware visually quiet against the drawer box. For different Zargen interior finishes, check whether a matching rail color is available in the family.
Cabinet shops specifying Zargen-based office and utility casework will find this rail the straightforward choice for filing drawer builds — the length is already matched to the system, so there is no field-cutting. Designers drawing out home office base cabinet layouts with Zargen drawers can specify this rail alongside the matching brackets as the complete file-drawer hardware list. Homeowners finishing a Zargen-based installation who want to add a filing drawer to an existing cabinet run will find the rail size works with what is already there.
The rail is for indoor, dry-cabinet use. It is engineered for the Zargen drawer platform and should be paired only with Zargen-compatible file hardware.
The source data does not specify letter versus legal capacity for this rail length. Confirm with Grass America before ordering if folder size is a deciding factor for your installation.
Two — one rail mounts on each side of the drawer box. This listing is for a single rail, so order two per drawer.
Yes. This is the rail only; it needs hanging rail brackets to be secured inside the drawer. Use brackets designed for the Zargen system — do not assume generic or other-brand file brackets will fit.
It is dimensioned and finished for Zargen. Using it in other systems may work dimensionally, but Grass designs Zargen components to work together — cross-system compatibility is not guaranteed and should be verified before purchase.
The source data does not indicate the rail is sold as cut-to-length stock. It is a fixed-size component at 508.5mm (20-1/16 inches). If a shorter depth is needed, check whether Grass offers this rail in additional lengths.
Two of these White steel side file rails, paired with the correct Zargen-compatible brackets, give a Zargen drawer the running gear it needs to carry hanging folders — a clean, system-native solution for any cabinet run that needs a filing drawer in the mix.
Sold In: 1 Each
