Hand Sanding Accessories 5" Diameter Stikit and PSA Hand Pads, 1/8" Thickness

3M Stikit Disc Hand Pad For Wood And Metal

3M Stikit disc hand pad is a neoprene rubber hand sanding pad designed for use with Stikit and PSA discs on wood and metal surfaces. The 5 inch diameter and 1/8 inch thickness create a flat, slightly cushioned surface that helps distribute sanding pressure for more even contact. The neoprene rubber body supports the disc while conforming modestly to workpieces, which helps when moving between flat cabinet panels and gentle contours. A nylon blue cloth face is designed to securely hold the adhesive-backed disc, so the abrasive stays put under hand pressure during passes across the surface. At the same time, the face is designed to allow easy disc removal, which helps when changing grits between sanding stages. An elastic hand band on the back holds the pad against the operator's hand, helping maintain control and reducing the tendency for the pad to slip during long sanding strokes.

Key Sanding Pad Details That Support Your Work

• The neoprene rubber construction provides a firm but slightly compliant backing, helping the disc stay in contact across minor surface variations while supporting consistent scratch patterns on wood and metal.
• The 5 inch diameter matches common Stikit and PSA disc sizes, so the full abrasive area is used during hand sanding passes across cabinet parts, face frames, or metal components.
• The 1/8 inch thickness keeps the pad relatively low profile, giving the operator a close feel to the surface while still cushioning the disc enough to reduce harsh pressure points.
• The nylon blue cloth face is designed to securely hold adhesive-backed discs, helping resist edge lifting during use while still allowing discs to be removed and replaced when changing grits.
• The elastic hand band on the back helps keep the pad attached to the hand, which supports controlled strokes along edges and flat runs without needing a tight grip on the pad body.

Hand Sanding Fit, Grip, And Disc Handling Details

This sanding pad is built for Stikit and PSA hand sanding workflows on wood and metal, so the pad size and materials all center around disc handling and grip. The 5 inch diameter interfaces directly with matching Stikit and PSA discs, helping align the abrasive edge with the pad edge for predictable sanding paths. The 1/8 inch thick neoprene rubber layer creates a balance between stiffness and give, so the pad can transmit hand pressure without digging corners into the workpiece. The nylon blue cloth face is designed specifically to hold the pressure-sensitive adhesive discs during use, then release them when it is time to swap discs. On the back, the elastic hand band anchors the pad to the user's hand, which supports repeatable front-to-back or side-to-side strokes without the pad rotating unexpectedly.

How This 3M Hand Pad Fits Shop Sanding Routines

Using The Pad On Wood And Metal Surfaces

This 3M hand sanding pad is indicated for hand sanding of wood and metal, so it can move between cabinet parts, millwork, or metal components in the same shop. The neoprene rubber backing supports sanding on flat panels, rails, or stiles where an even scratch is needed before finishing. On metal work, the same 5 inch format lets the operator use adhesive-backed discs to clean or blend surfaces by hand where power sanders are not ideal. The nylon blue cloth face is designed to work with Stikit and PSA discs, so once a disc is pressed in place, the pad becomes an extension of the hand across both wood grains and metal surfaces.

Disc Changes, Control, And Consistent Hand Pressure

The 1/8 inch thick neoprene rubber and nylon face work together to support disc changes and controlled pressure. The cloth face is designed to hold each adhesive disc securely in use, which helps the abrasive track straight during long strokes. When switching from one grit to another, the face allows easy removal of the used disc so a new disc can be applied without damaging the pad. The elastic hand band on the back keeps the pad anchored to the hand, which can reduce hand strain from gripping and helps keep pressure more consistent across the 5 inch disc area. This combination helps support predictable sanding results across repeated parts in a production or fabrication setting.

Practical Questions About This 3M Sanding Pad

Selecting This Pad For Wood And Metal Sanding

Choose this 3M Stikit disc hand pad when a 5 inch, 1/8 inch thick neoprene rubber pad is needed for hand sanding wood and metal with Stikit or PSA discs. The nylon blue cloth face is designed for secure disc holding with easy disc removal, and the elastic hand band supports controlled strokes during repeated sanding tasks in industrial and occupational environments.