CompX National Pin Tumbler Cam Lock, 1-7/16" Cylinder with 3/4" Mounting Hole, Dull Chrome C8106-915-26D
Description
CompX National Pin Tumbler Cam Lock For Cabinets
CompX National pin tumbler cam lock gives drawers and cabinet doors a keyed locking point using a familiar pin tumbler mechanism, which matters when a job calls for consistent security across multiple cabinet locations. The 1-7/16 inch cylinder length reaches through typical cabinet thicknesses to engage the cam properly, helping the lock throw cleanly without forcing or binding. A 3/4 inch mounting hole sets a clear boring size, so shop layouts and drilling jigs can be set once and repeated across a run of casework. C8106 is for flush mount construction, so the lock seats in cabinets built with fronts flush to the case, matching common commercial and residential cabinet styles. Available in dull chrome finishes, the lock presents a neutral, low-reflective face that blends with many hinge and pull finishes on built projects. The keyed alike 915 code option lets multiple locks operate from the same key code.
Key Cam Lock Details That Help Field Work
- The 1-7/16 inch cylinder length allows the cam to reach through typical cabinet front material, which supports positive engagement of the cam with the strike area on drawers or doors.
- A 3/4 inch mounting hole defines the bore size for the case, which streamlines layout and drilling when multiple cabinets need the same lock preparation.
- Flush cabinet construction design means C8106 seats correctly in cabinets with flush fronts, which keeps the lock face aligned with the door or drawer surface for a cleaner finished appearance.
- Available in dull chrome finishes, the lock presents a muted surface, which helps it visually coordinate with a range of satin and brushed cabinet hardware finishes.
- The keyed alike 915 code option allows multiple locks to share the same key code, which simplifies key management when several drawers or doors are on the same project.
Cam Lock Mounting And Rotation In Cabinets
The cam lock uses 90 degree cam turn operation, so the cam travels a quarter turn from locked to unlocked, which keeps handle throw short and predictable for users. Rotation is 90 degree clockwise and counterclockwise, which lets the cam be oriented to suit different strike positions on drawers or doors. The key is removable in both locked and unlocked positions, so the user can leave the lock in either state without the key present, useful when cabinets need temporary open access. C8106 is for flush mount construction, so the cylinder and cam are positioned to work with flush cabinet faces, helping align the cam sweep with the cabinet edge without extra spacers.
Using This Cam Lock In Drawer And Door Builds
Where This Flush Cabinet Cam Lock Is Applied
The application notes call out use for drawer, right-hand or left-hand doors, which means the same cam lock can serve multiple cabinet positions on a project. C8106 is for flush mount construction, so it fits cabinets where the door or drawer front is even with the cabinet sides, matching many frameless and flush inset designs. The 1-7/16 inch cylinder length and 3/4 inch mounting hole specification tie the lock to common cabinet material thicknesses and boring setups, which supports consistent placement from cabinet to cabinet. Available in dull chrome finishes, the face of the lock suits work where satin chrome or similar hardware is specified, helping keep visible hardware finishes in the same family across a job.
Details That Support Repeatable Lock Installation
The 3/4 inch mounting hole dimension gives installers a single bit size to use, supporting production drilling and reducing layout changes between units. The 90 degree cam turn operation limits travel to a quarter turn, so knob or key movement is quick and repeatable in tight spaces such as under-counter cabinets. With 90 degree clockwise and counterclockwise rotation, the cam can be set up to throw toward different strikes, which matters when locks are mirrored on right-hand and left-hand doors. Key removable in both locked and unlocked positions lets the lock stay in its chosen state without the key hanging nearby, which is useful on shop floors and finished installations where clean fronts are preferred. The keyed alike 915 code option links several locks to one key code, which reduces key count when many drawers or doors share the same security level.
Common Questions About C8106-915-26D Cam Lock Use
What type of mechanism does this cam lock use?
The CompX National pin tumbler cam lock uses a pin tumbler mechanism, which provides a familiar keyed operation for cabinets and helps align with other pin tumbler hardware on the same project.
How long is the cylinder on the C8106-915-26D lock?
The cylinder is 1-7/16 inch long, which allows the cam to reach through common cabinet front thicknesses so the lock can engage properly on drawers and doors.
What mounting hole size is required for this cam lock?
The cam lock uses a 3/4 inch mounting hole, giving a clear boring size for drilling jigs and repetitive cabinet production where the same lock preparation is needed.
How does the 90 degree cam turn affect operation?
The cam operates with a 90 degree cam turn, so it moves only a quarter turn between locked and unlocked, which shortens key travel and speeds up everyday cabinet access.
Can this cam lock be used on both right-hand and left-hand doors?
The application is for drawer, right-hand or left-hand doors, so one lock model can serve various cabinet door swings and drawer fronts on the same job.
What keying options does this cam lock support?
The lock will key together with other pin tumbler locks using the D4291 key blank, and master keying to GM1 allows grouped access control across multiple locks.
Choose This Cam Lock For Flush Cabinet Projects
CompX National pin tumbler cam lock C8106-915-26D brings a 1-7/16 inch cylinder, 3/4 inch mounting hole, and flush cabinet construction design together for straightforward cabinet locking. With 90 degree cam turn, key removable in both locked and unlocked positions, and keyed alike 915 code availability, this dull chrome cam lock lines up well with drawer and R.H. or L.H. door applications that need consistent, repeatable security across multiple cabinets.
