Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bosch laminate jigsaw blade T101AOF is a 3-1/4 inch, 20TPI scroll blade designed for curved, splinter free cuts in laminate flooring and similar abrasive materials. The pointed teeth and ground tooth design support tight, controlled curves while maintaining a clean edge at the laminate surface, which matters when cuts run along visible flooring seams or around finished trim. This blade is described as Special for Laminate and is optimized for laminated flooring materials, so its geometry and material are focused on that task rather than general construction cuts. The bimetal construction balances cutting performance and durability in abrasive laminate, helping the teeth maintain their profile over multiple cuts in the same job. The blade is ideal for flooring installers who need accurate curved cuts around pipes, outlets, or other fixed structures where a straight cut will not fit.
This Bosch T101AOF laminate jigsaw blade uses a T-shank design, which fits over 90 percent of current jigsaw makes and models. That wide fit range allows installers to use existing T-shank jigsaws on laminate flooring work without changing tools. The blade is suitable for jig saws from Bosch, Dewalt, Hitachi, Makita, Milwaukee, and other brands that accept T-shank blades, so crews running mixed tool inventories can still standardize on this cutting setup. It is ideal for jig saws without orbital action, which suits controlled, fine cutting where aggressive orbital motion would increase splintering at the laminate surface. This combination of shank style and cut type helps maintain consistent results across different sites and tool setups.
The Bosch T101AOF jigsaw blade is optimized for laminated flooring materials and similar abrasive materials, aligning directly with laminate flooring installation tasks. Flooring installers who require curved cuts around pipes, outlets, or other structures can use the scroll blade design to follow tight templates where straight blades struggle. Because it is Special for Laminate, the blade geometry focuses on surface quality at the visible face of the flooring, supporting splinter free cuts in areas that will remain exposed after trim is installed. In rooms with multiple penetrations or complex wall lines, the curved cutting capability allows installers to follow markings more closely, reducing the need for secondary trimming. The bimetal design helps manage tooth wear in these abrasive materials so cut performance remains consistent across repeated scribe cuts.
The scroll blade type for curved, splinter free cuts works with jig saws without orbital action, which favors a smoother cutting motion and helps protect the laminate surface from breakout. The 20TPI configuration supports a fine feed rate, allowing the blade to remove material gradually and leave cleaner edges along cut lines. Pointed teeth and a ground tooth design assist the blade in initiating and maintaining curves, reducing the tendency to wander off layout marks when navigating tight radiuses. The T-shank mounting gives maximum grip and stability in compatible jigsaws, which supports consistent tracking and reduces chatter that can mark the flooring surface. With these characteristics combined, installers can repeat similar curved cuts across multiple boards with more predictable results, helping joints and transitions align cleanly in the finished floor.
The Bosch T101AOF jigsaw blade is optimized for laminated flooring materials and similar abrasive materials, which supports clean, controlled cuts in typical laminate flooring installations.
The 20TPI tooth design creates a fine cut with smaller bites into the laminate, which supports splinter free edges along visible flooring seams and around fixtures.
The Bosch laminate jigsaw blade is a scroll blade for curved, splinter free cuts, so its tooth and blade profile favor tight curves needed around pipes and outlets.
The T101AOF jigsaw blade uses a T-shank design, providing maximum grip and stability in compatible jigsaws and fitting over 90 percent of current makes and models.
The Bosch T101AOF blade is ideal for jig saws without orbital action, aligning with controlled, fine cuts where reduced aggressiveness helps limit surface splintering.
This Bosch laminate jigsaw blade uses pointed teeth with a ground design, helping the blade follow curves accurately while supporting a clean edge on laminate surfaces.
The Bosch 3-1/4 inch x 20TPI curved, splinter free cut jigsaw blade T101AOF is tailored to laminated flooring and similar abrasive materials, so its bimetal construction and tooth design work directly for flooring installers. The scroll blade form supports curved cuts around pipes, outlets, and other fixed structures where precise scribing is needed. With a T-shank that fits over 90 percent of current jigsaw models, this blade integrates easily into existing T-shank tool setups. For laminate projects that demand clean, curved cuts, choosing this Bosch laminate jigsaw blade aligns the blade design with the job requirements.
Sold In: 1 Card
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Card |  WW608-116-112 Mfr# 0608116112061 1 | 82mm Scroll/Curved Cuts Jigsaw Blade for Wood (5/Pack) |