
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Natures Splendor pull is a hand-crafted cabinet handle from the Natures Splendor Collection that uses an intricate, nature-influenced design, so doors and drawers gain a detailed look that supports design-driven millwork or furniture projects. The pull is made from zinc die-cast material, which provides a solid metal feel that helps cabinets operate with a confident grip on everyday open-and-close cycles. Its weathered brass finish delivers a worn, aged brass appearance that works well when matching traditional, rustic, or classic hardware layouts. With a defined collection name and consistent finish, this pull supports coordinated hardware runs across multiple cabinets, helping projects maintain visual alignment from one opening to the next. The Amerock Corporation branding and specific manufacturer part number BP1580R2 identify it as a repeatable, spec-driven choice for future replacements.
This Amerock Natures Splendor pull uses a 3 inch center-to-center dimension, so mounting holes can be drilled on a standard 3 inch spread that is common on many cabinet and drawer fronts. The pull length of 5-5/8 inch creates a visible handle span that suits doors or wider drawer faces while keeping the footprint compact. A 1 inch projection sets the gripping surface out from the cabinet face, giving fingers clearance between the pull and the door or drawer. The 11/16 inch width keeps the profile slim, which helps when aligning multiple pulls in tight runs without crowding adjacent details. With these defined measurements, installers can plan layouts, drilling patterns, and clearances with predictable results on new or replacement work.
The Natures Splendor weathered brass cabinet pull works well on cabinet doors and drawers where a decorative, nature-inspired profile is desired, because its hand-crafted, intricate design contributes character to face-frame or frameless installations. Its 3 inch center-to-center measurement aligns with common drilling jigs, so it suits both new cabinet builds and replacements on existing 3 inch layout fronts. The weathered brass finish supports projects targeting an aged or traditional brass appearance, so it fits kitchen, bath, or built-in furniture work that calls for warmer metal tones. With a total length of 5-5/8 inch, this pull balances proportion on medium-size fronts, giving users enough gripping surface without overwhelming smaller doors. The zinc die-cast material supports repeated daily operation in residential or light commercial environments that use decorative hardware.
The defined 3 inch center-to-center spacing allows installers to use standard templates for drilling, improving repeatability across banks of cabinets where identical hole spacing is required. The 1 inch projection positions the handgrip away from the cabinet face, promoting comfortable finger access that can reduce fumbling when grabbing doors or drawers at busy work areas. At 11/16 inch in width, the pull fits visually between rails and stiles on many door designs, helping layouts line up cleanly with other decorative hardware elements. The 5-5/8 inch overall length gives a measurable edge-to-edge reference, so installers can align ends relative to panel edges or drawer widths. Because the pull belongs to the Natures Splendor Collection, specifiers can pair it with other matching pieces to maintain consistent sizing and design across multi-room or multi-cabinet runs.
The Amerock Natures Splendor pull has a 3 inch center-to-center dimension, so it matches common cabinet drilling patterns and works for many replacements using that standard spacing.
The BP1580R2 pull is 5-5/8 inch long, providing a substantial handle length that suits typical cabinet doors and drawer fronts without dominating smaller faces.
This Amerock cabinet pull is made from zinc die-cast material, creating a solid metal body that supports regular opening and closing on frequently used cabinets.
The pull has a weathered brass finish, giving it an aged brass appearance that coordinates with traditional or warm-toned decorative cabinet hardware.
This cabinet pull has a 1 inch projection and 11/16 inch width, providing finger clearance from the door while keeping a slim profile on the cabinet face.
The Amerock part number BP1580R2 identifies this specific Natures Splendor weathered brass pull, supporting clear specification and easy reordering for matching projects.
The Amerock Natures Splendor pull in weathered brass combines a hand-crafted, nature-influenced profile with defined dimensions, so cabinet layouts can be planned around a known 3 inch center-to-center pattern. Its zinc die-cast construction and 5-5/8 inch overall length give doors and drawers a solid, easy-to-grip handle that suits daily use. With the Natures Splendor Collection identity and BP1580R2 part number, this pull serves well on both new installations and follow-up phases where matching hardware matters. Use these verified measurements and finish details to choose this pull when a consistent, nature-inspired look in weathered brass is needed across multiple cabinet openings.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMBP1580-ORB Mfr# BP1580ORB | Amerock Nature's Splendor 3" (76 mm) Center to Center Oil Rubbed Bronze Pull, BP1580ORB | ||||
Sold in: 1 Each | AMBP1580-G10 Mfr# BP1580G10 | Amerock Nature's Splendor 3" (76 mm) Center to Center Satin Nickel Pull, BP1580G10 | ||||
Sold in: 1 Each | AMBP1581-ORB Mfr# BP1581ORB | Amerock Nature's Splendor Oil Rubbed Bronze 1-5/16" (33 mm) Diameter Knob, BP1581ORB | ||||
Sold in: 1 Each | AMBP1581-G10 Mfr# BP1581G10 | Amerock Nature's Splendor Satin Nickel 1-5/16" (33 mm) Diameter Knob, BP1581G10 |
Sold In: 1 Each