Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Conquest pull gives you a 3 inch center to center grip point for cabinet doors or drawers, so layout stays consistent across a run. The zinc die cast construction forms a solid handle body, which supports everyday use in kitchen or shop cabinetry. The lustre brass finish provides a warm metallic look, tying in with other brass-toned components in the space. With an overall length of 5 inches, the pull spans beyond the screw centers, creating a proportional look on standard cabinet fronts. A 1 inch projection sets the hand clearance off the face, helping fingers get behind the pull without contacting the door surface. The 11/16 inch width builds a narrow front profile, so the pull sits visually light while still offering a defined edge to grasp.
The 3 inch center to center measurement defines the hole spacing, so existing 3 inch layouts can accept this pull without redrilling. A 5 inch overall length means the ends extend beyond the screw locations, which impacts where the pull lands relative to panel edges and rails. The 1 inch projection sets how far the handle stands off the surface, affecting both clearance and how far the hardware reaches into the room. At 11/16 inch in width, the pull fits comfortably on standard cabinet rails without overhanging narrow framing. The 8-32 x 1 inch screw size specification identifies the thread engagement and nominal reach through typical cabinet door or drawer fronts.
This Conquest Series 3 inch center to center pull fits applications that follow the common 3 inch drilling standard, such as many residential cabinet lines. The 5 inch overall length makes it suitable for doors and drawers where installers want a slightly extended handle footprint for balance on the face. With its lustre brass finish, the pull works in projects calling for a bright brass tone, helping establish a consistent hardware look across a kitchen, bath, or shop storage run. The zinc die cast material supports use on frequently operated fronts, giving each opening point a uniform appearance from one cabinet to the next. Because the width is 11/16 inch, this pull also fits well on face frames and drawer fronts that do not have wide rails, keeping the hardware within the flat area of the panel.
The 3 inch center to center dimension allows installers to use standard jigs and templates that are set up for this spacing, which speeds drilling and keeps hardware lines straight from cabinet to cabinet. The specified 8-32 x 1 inch screw size pairs with common boring depths in typical cabinet construction, supporting consistent thread engagement through doors or drawer fronts. A 1 inch projection establishes predictable hand clearance, which helps maintain the same feel and grip depth across all doors in a bank. The 5 inch overall length gives a known endpoint for positioning relative to door edges, aiding in setting reveals that look even. With an 11/16 inch width, the pull centers easily on narrow rails, simplifying layout where stile dimensions leave limited flat surface for mounting.
The Hickory Hardware Conquest pull has a 3 inch center to center dimension, which matches a widely used drilling pattern for cabinet doors and drawers.
The pull has a 5 inch overall length, so it extends beyond the screw holes and provides a balanced look on standard cabinet fronts.
The P14444-LB pull is made from zinc die cast, giving each handle a molded, consistent shape across multiple units in a project.
This cabinet pull has a lustre brass finish, providing a bright brass appearance that coordinates with other lustre brass hardware.
The Conquest Series pull projects 1 inch from the cabinet surface, giving space for fingers to grip the handle comfortably.
The P14444-LB pull is specified with 8-32 x 1 inch screws, aligning with common cabinet door and drawer front thicknesses.
The Lustre brass cabinet pull from the Conquest collection brings a 3 inch center to center layout together with a 5 inch overall length, giving cabinets a consistent handle footprint. The zinc die cast construction, 1 inch projection, and 11/16 inch width combine to create a pull that fits standard cabinet fronts while maintaining a predictable grip feel. For projects that call for a bright brass tone and a common 3 inch drilling pattern, this P14444-LB pull provides defined dimensions that support repeatable installation across multiple openings.