Colonial Bronze 165 Pull 3-1/2" (89 mm) Center to Center, Satin Bronze, 165-10

Colonial Bronze 165 Series Pull For Cabinets

Colonial Bronze 165 Series pull gives you a 3-1/2 inch center to center layout, so the screw holes line up cleanly on cabinet doors and drawers that follow this common drilling pattern. The pull uses solid brass construction, which provides a dense, substantial feel when opening and closing cabinetry that sees steady daily use. A satin bronze finish on the brass creates a muted metal look that suits jobs calling for warm-toned decorative hardware without a high-gloss shine. The pull is part of the Tarnish-Free Surface Series, which is designed to keep the satin bronze finish looking consistent over time on installed cabinetry. A total length or diameter of 4 inches means the pull extends slightly past the screw centers on each side, giving fingers room at each end during use. Projection of 7/8 inch keeps the hand off the door surface while still sitting close to the face.

Key Brass Pull Details That Support Your Work

• The 3-1/2 inch center to center dimension matches a widely used boring pattern, which streamlines layout on new cabinet doors and speeds changeouts on existing fronts drilled to that standard spacing.
• The 4 inch overall length gives a bit of overhang beyond the mounting holes, which helps create a balanced visual on face frames and slab fronts while keeping the pull compact for smaller doors and drawers.
• The 7/16 inch width keeps the pull visually light, which works well on tight drawer stacks where hardware can crowd the fronts, yet still provides enough edge surface for a controlled grip.
• The 7/8 inch projection provides hand clearance from the cabinet face during operation, which reduces knuckle contact with the surface and helps protect finished fronts from finger wear patterns.
• The satin bronze finish presents a soft sheen rather than a mirrored surface, which supports designs that call for warm metal tones while reducing the appearance of small fingerprints in normal use.
• The Tarnish-Free Surface Series designation is engineered to hold the satin bronze appearance, which supports long-term visual consistency across banks of cabinets installed in the same project.

Installation Dimensions That Guide Hole Layout

The 3-1/2 inch center to center measurement defines the exact spacing between mounting points, which sets the drilling pattern for doors and drawers during layout. With an overall length of 4 inches, the pull extends slightly past those centers, which helps center the grip on the drilled pattern without needing extra door width. The 7/8 inch projection positions the gripping surface off the face, which influences setback choices when aligning multiple pulls in a run. A slender 7/16 inch width keeps the pull compact on the front, which can help maintain clearances on narrow stile areas or tight drawer groupings where hardware spacing is critical.

How This Satin Bronze Pull Fits Real Projects

Using The 165-10 Pull On Cabinets And Furniture

The Colonial Bronze 165-10 pull belongs to the Tarnish-Free Surface Series, which supports cabinetry jobs where a consistent satin bronze look is expected across doors and drawers over time. Its classification under decorative hardware handles and pulls means it is intended for cabinet and furniture fronts that need both function and visual coordination. The 3-1/2 inch center to center layout works on many residential and commercial cabinets drilled to that pattern, which helps when matching existing hardware locations during upgrades. A 4 inch overall length keeps the pull scaled for standard-size doors and drawers, which helps maintain proportion on both single fronts and aligned banks of cabinets. Solid brass construction gives the pull weight on the hand, which suits higher-use fronts such as kitchen cabinet doors, vanity drawers, or frequently accessed storage pieces.

Details That Support Consistent Alignment And Finish

The 3-1/2 inch center to center and 4 inch overall length combination provides a clear reference for templating, which assists in repeating mount locations across multiple fronts on a run. With a 7/8 inch projection, the pull sits off the surface in a defined way, which can help keep the hardware line visually straight when aligning several pulls at the same reveal. The 7/16 inch width keeps the profile narrow, which allows tighter spacing between adjacent pulls on drawer stacks without overlapping sightlines. The satin bronze finish over solid brass works with projects that specify warm metallic tones, and the Tarnish-Free Surface Series designation supports jobs where finished hardware appearance needs to remain stable alongside other decorative elements over time.

Common Questions About This Colonial Bronze Pull

Select This Satin Bronze Pull For Matching Work

The Colonial Bronze 165 Series pull combines a 3-1/2 inch center to center layout, 4 inch overall length, and 7/8 inch projection in a satin bronze Tarnish-Free Surface Series finish. Those dimensions give clear drilling and alignment points on doors and drawers, while the solid brass construction and slim 7/16 inch width suit standard cabinet and furniture fronts. When a project calls for warm-toned decorative hardware with defined mounting measurements, this 165-10 satin bronze pull provides a consistent option to match across multiple fronts.