Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Forte Series appliance pull in weathered nickel provides a substantial handle for larger cabinet or appliance fronts where an 18 inch center to center grip is required, so alignment with wider doors stays consistent across a run. The pull belongs to the Toccata Series and is made from zinc die cast, giving a solid metal feel that supports frequent daily use on high-traffic panels. Its weathered nickel finish creates a muted metal look that helps coordinate with many existing nickel-toned hinges or fixtures in the same area. The pull has a total length of 19 inches, which leaves visible grip extension beyond the 18 inch mounting span to aid hand placement. A projection of 2-1/2 inches brings the handle comfortably away from the door surface, providing clearance for fingers when opening larger, heavier fronts. Width of 1-1/8 inches offers a broad gripping surface that feels stable when pulling.
The 18 inch center to center measurement defines exactly where mounting holes must be located, so layout lines can be marked 18 inches apart for accurate drilling on doors or drawer fronts. With the pull spanning 19 inches overall, there is a half inch of handle body extending beyond each mounting point, which helps visually balance the ends once installed. A projection of 2-1/2 inches moves the grip off the surface, so the arc from the mounting point to the front provides adequate clearance between the userâs hand and the cabinet face. The 1 inch diameter at each base indicates the circular contact zone that rests against the panel, which influences how much flat area is needed at each mounting location. Together, these dimensions guide hole placement and front layout for a consistent row of pulls.
This appliance pull is classified under appliance pulls within decorative hardware and moldings, aligning it with use on larger cabinet and appliance-style fronts that benefit from an 18 inch center to center span. The weathered nickel finish allows the pull to coordinate with other weathered nickel components in the same installation area, supporting a tied-together appearance across doors and drawers. Its 19 inch total length makes it suitable for taller doors or wide panels where a longer handle helps distribute pulling force across more of the surface. As part of the Toccata Series from Berenson Corporation, this pull can be used alongside other Toccata pieces that share similar styling and finish. The 2-1/2 inch projection and 1-1/8 inch width work together to support a full-hand grip, which is useful on fronts that are opened many times throughout the day.
The precise 18 inch center to center spacing allows consistent hole patterns from one door to the next, which helps maintain straight sightlines when multiple pulls are installed in a row. The zinc die cast construction gives the pull a unified metal body, which supports a consistent feel when fastening it against door materials commonly used in cabinetry. With a 1 inch base diameter at each end, the pull concentrates its contact on a defined circular area, helping the ends sit flush against flat mounting surfaces. The 19 inch overall length ensures the handle edges extend slightly past the mounting points, which visually finishes each end and can help guide hand placement toward the center. The 2-1/2 inch projection keeps the gripping area comfortably away from trim or raised door profiles, aiding operation when doors feature decorative faces. The 1-1/8 inch width offers more surface for fingers to wrap around, contributing to a controlled pull on heavier or taller doors.
The pull has an 18 inch center to center, 19 inch overall length, 2-1/2 inch projection, 1-1/8 inch width, and 1 inch base diameter, which together define drilling layout and grip feel.
The 18 inch center to center spacing sets a clear hole-to-hole distance, so doors and panels can be drilled with matching layouts for aligned rows of appliance pulls.
The appliance pull is zinc die cast, giving it a solid metal construction that supports a consistent feel when used on cabinet or appliance-style fronts.
The pull has a weathered nickel finish, which delivers a muted metal tone that coordinates with other weathered nickel decorative hardware in the same space.
The 2-1/2 inch projection holds the pull away from the door surface, creating space behind the handle so fingers can wrap around without contacting the front.
The 1 inch base diameter defines the round contact area at each end of the pull, indicating how much flat surface is engaged where it meets the door or panel.
The Berenson Forte Series appliance pull in weathered nickel combines an 18 inch center to center span with a 19 inch overall length, giving a handle sized for larger cabinet and appliance-style fronts. Its zinc die cast construction and Toccata Series design provide a coordinated option when a weathered nickel finish is desired across multiple fronts. With defined dimensions for center to center, projection, width, and base diameter, this pull offers known layout points for drilling and mounting. Choose this model when an 18 inch center to center appliance pull is required to match layout and finish needs on tall or wide doors.
Sold In: 1 Each
