Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Essential'Z 128mm pull is a zinc die-cast cabinet handle in a satin nickel finish that provides a clean, modern look while staying practical for everyday use. The 5-1/16 inch center-to-center drilling creates a consistent layout across cabinet doors and drawers, which helps installers line up multiple pulls quickly on longer runs. Overall length of 5-9/16 inches gives enough hand clearance on wider fronts, improving grip comfort without looking oversized. A 1-3/8 inch projection sets the pull off the face just enough for fingers to grab easily, which is helpful on thicker door profiles and drawer fronts. The 1/2 inch width keeps the profile slim, so it sits neatly on narrow rails or smaller drawer fronts. The Essential'Z collection design blends clean lines with subtle curves, which suits both straightforward shop builds and higher-visibility cabinet installations.
This Amerock cabinet pull is drilled for a 5-1/16 inch (128 mm) center-to-center mount, which works well with standard cabinet boring patterns in shops and on job sites. That fixed drilling distance helps keep rows of pulls straight when using jigs or templates, reducing layout time on multi-cabinet installations. With a 1-3/8 inch projection, the pull stands off the face enough that fingers can hook from above or below, which is useful on both doors and deep drawers. The 5-9/16 inch overall length gives a comfortable grab area across the front, supporting use on wider kitchen or bath drawers that see frequent opening and closing. Its 1/2 inch width keeps the contact area defined without covering too much of the finished cabinet surface.
This Amerock BP24013SN pull from the Essential'Z collection is designed for mounting on cabinet doors and drawer fronts where a 5-1/16 inch (128 mm) center-to-center drilling is desired. That specific drilling size aligns with many cabinet hardware layouts, so it suits new shop-built work that follows metric-based or 128 mm drilling patterns. With a total length of 5-9/16 inches, the pull works well across medium-width doors and drawers, giving enough span for a full hand grip along the bar. The 1-3/8 inch projection is particularly helpful on thicker drawer fronts, because it lets fingers wrap behind the pull without scraping the finished surface. A 1/2 inch width keeps the bar streamlined, which helps when installing multiple pieces close together on banks of drawers, since the pulls visually line up without appearing bulky. The satin nickel finish supports jobs calling for a softer metal tone that coordinates with many commonly specified satin nickel hinges and knobs within the same space.
The defined 5-1/16 inch center-to-center measurement allows installers to use boring jigs or templates set once and repeated across the entire run, which reduces layout variability from cabinet to cabinet. That repeatable drilling pattern also helps when aligning pulls on tall pantry doors or stacked drawer units, where small shifts become noticeable across a large elevation. The zinc die-cast material gives the pull a uniform shape and surface, which supports consistent contact points when aligning multiple pulls visually along a line. With a 5-9/16 inch overall length, the pull has enough presence that it reads consistently even across different cabinet sizes, which simplifies hardware selection for whole-room layouts. The 1-3/8 inch projection and 1/2 inch width combine to create a predictable clearance profile from the door face, which matters when coordinating with adjacent tall cabinets, end panels, or nearby walls so that the pull has working space around it.
This Amerock Essential'Z pull uses a 5-1/16 inch (128 mm) center-to-center dimension, which matches many cabinet boring patterns for consistent mounting across doors and drawers.
The pull length is 5-9/16 inches, giving a comfortable hand span that suits typical cabinet doors and standard drawers without overpowering the front.
The pull has a 1-3/8 inch projection from the cabinet face, providing finger clearance that supports an easy grip on both doors and deeper drawers.
The bar width is 1/2 inch, which keeps the pull visually slim so it works well on narrow stiles and smaller drawer fronts.
The Amerock BP24013SN pull is made from zinc die-cast, giving a solid, molded body with consistent shaping across multiple pieces in a project.
This pull has a satin nickel finish, providing a muted metallic appearance that coordinates with many satin nickel hinges and other decorative hardware.
The Amerock Essential'Z 128mm pull pairs a 5-1/16 inch center-to-center drilling with a 5-9/16 inch overall length, giving a practical balance of layout flexibility and hand comfort on cabinets. Its zinc die-cast construction and satin nickel finish support consistent appearance across multi-piece installations where matching hardware is important. With a 1-3/8 inch projection and 1/2 inch width, the pull offers reliable finger clearance without a bulky profile. For projects that standardize on 128 mm spacing and a satin nickel look, this pull provides a straightforward option that aligns form and function.
Sold In: 1 Each
