
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Harmony Series 3 inch pull gives cabinets a defined 3 inch center to center grip point, which helps installers drill consistent hole spacing across doors and drawers. The zinc die cast material provides a solid-feeling pull that supports everyday cabinet use. The weathered nickel finish offers a muted metallic look that helps hardware blend with other weathered nickel components in a project. A 3-11/16 inch overall length provides clearance around the mounting area, which helps on face frames and wider rail designs. The 1-1/8 inch projection sets the hand away from the cabinet face, which reduces knuckle contact when opening heavier fronts. An 11/16 inch width gives a narrow visual line, which works well on smaller cabinet fronts and tight layouts. The 9/16 inch base dimensions define the footprint at each mounting point, which helps when covering old screw marks or planning new layouts.
The 3 inch center to center measurement on this Berenson Harmony cabinet pull defines the drilling pattern, which lets installers template and repeat holes across a full run of cabinets. The 3-11/16 inch overall length provides a visual margin beyond the mounting holes, which helps align the pull evenly relative to door edges and stile widths. A projection of 1-1/8 inch sets the working clearance off the door, which affects how easily hands can grab the pull on thicker fronts. The 11/16 inch width and 9/16 inch base dimensions outline the contact area with the cabinet, which matters when covering prior hardware marks or placing pulls on narrow rails.
This Harmony collection cabinet hardware from Berenson Corporation uses a 3 inch center to center layout, which matches a common drilling pattern on many residential and light commercial cabinets. The 3-11/16 inch overall length lets the pull sit comfortably on standard drawer fronts, where a compact handle is preferred over longer bar styles. With a width of 11/16 inch, the pull suits smaller bath vanities or upper kitchen doors, where wider hardware might look oversized. The 9/16 inch base dimensions define compact footprints at each end, which helps when positioning the pull on narrow stiles or rail sections. The weathered nickel finish ties into other weathered nickel decorative hardware and moldings, supporting a coordinated look across handles, pulls, and matching pieces from the same environment.
The 3 inch center to center spacing on this 9436-10WN-P pull aligns with many jigs and drilling templates, which helps installers maintain accurate placement and speed on large cabinet runs. The zinc die cast material gives the pull a uniform structure, which supports consistent mounting torque at both bases. A 1-1/8 inch projection keeps the gripping area away from the cabinet surface, which helps protect finished faces from contact during repeated use. The 3-11/16 inch length provides balanced overhang beyond the screw centers, which aids in visual alignment when matching multiple pulls along a bank of drawers. The 11/16 inch width and 9/16 inch base dimensions provide predictable coverage at each mounting point, which matters when replacing older pulls that left visible marks in the mounting zone.
The Berenson Harmony 9436-10WN-P pull has a 3 inch center to center, 3-11/16 inch overall length, 1-1/8 inch projection, 11/16 inch width, and 9/16 inch base dimensions for defined mounting and clearance.
The pull is made from zinc die cast, which provides a solid metal construction that supports normal cabinet opening and closing loads in everyday use.
The 3 inch center to center spacing matches common cabinet drilling patterns, which allows installers to use standard templates for consistent hole placement across multiple fronts.
The 1-1/8 inch projection sets the pull away from the cabinet surface, providing hand clearance that reduces knuckle contact with finished door or drawer faces.
The weathered nickel finish gives the pull a muted metallic look that coordinates with other weathered nickel decorative hardware and moldings in the same space.
The 9/16 inch base dimensions define each mounting footprint, helping cover prior screw marks and guiding placement on narrow stiles or rails.
The Berenson Harmony Series 3 inch pull in weathered nickel combines a 3 inch center to center layout with a 3-11/16 inch overall length, giving installers a compact, defined handle size for cabinet runs. The zinc die cast construction and 1-1/8 inch projection support functional daily use while maintaining hand clearance off finished faces. With 11/16 inch width and 9/16 inch base dimensions, this 9436-10WN-P pull offers predictable coverage at each mount point, useful when planning new cabinet installs or updating existing fronts to weathered nickel hardware.
Sold In: 1 Each