Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Harmony weathered nickel pull is a zinc die cast handle sized for 3-3/4 inch (95 mm) center to center drilling, so it lines up with standard cabinet and drawer hole patterns on many projects. The 4-7/16 inch overall length gives comfortable hand clearance across typical drawer fronts while keeping the hardware visually proportional to doors. A 1-1/8 inch projection sets the pull far enough off the surface for a solid four-finger grip, which helps when opening heavier cabinet loads. The 11/16 inch width provides a stable bearing surface against the face, reducing point pressure on painted or laminated fronts during repeated use. A weathered nickel finish delivers a muted, aged-metal look, which helps this pull blend into both traditional and transitional kitchens. Base dimensions of 9/16 inch at each mounting point give a defined footprint that seats firmly on the door or drawer face for a consistent, finished appearance across a run.
The 96 mm center to center drilling dimension defines where the two mounting points land, keeping hole locations consistent across a bank of cabinets for straight visual lines. With a base dimension of 9/16 inch at each end, the pull seats on a compact footprint that fits comfortably on narrow rail sections of doors. The 11/16 inch overall width keeps the handle low-profile relative to the face, which helps avoid crowding on narrow drawer fronts while still presenting an easy target for the hand. A 1-1/8 inch projection defines how far this zinc die cast pull stands off the surface, providing space behind the grip so fingers clear the door or drawer face during operation.
This 96mm center to center pull fits cabinet and drawer layouts drilled on a 3-3/4 inch pattern, so it integrates cleanly into many standard kitchen and bath runs. The 4-7/16 inch overall length works well on both doors and moderate-width drawers, giving a balanced look that does not overpower smaller fronts. With base dimensions of 9/16 inch, the Harmony Series pull positions easily on narrow stiles or rails where larger footprints might crowd neighboring edges. The 11/16 inch width keeps the profile compact, supporting tighter spacing between adjacent fronts while still giving a defined edge for the hand to catch. A 1-1/8 inch projection suits doors near walls or appliances, helping the grip stay usable without projecting excessively into the walkway.
The defined 3-3/4 inch (95 mm) center to center measurement lets installers repeat the same drilling pattern across multiple boxes, saving layout time and keeping handle alignment accurate over long cabinet runs. Zinc die cast construction delivers a uniform shape from pull to pull, which supports straight sightlines when several Harmony Series pieces are installed in a row. The weathered nickel finish gives every 9442-10WN-P cabinet pull the same aged-metal appearance, helping projects maintain a consistent tone across doors, drawers, and panels. The 4-7/16 inch length and 11/16 inch width define predictable proportions, which simplifies planning when mixing this handle with other Harmony components on different sized fronts. With a 1-1/8 inch projection repeated on each pull, finger clearance feels the same from one cabinet to the next, supporting a uniform user experience throughout the space.
The Berenson Harmony Series 9442-10WN-P pull has a 3-3/4 inch (95 mm) center to center dimension, so hole locations are spaced on a 96 mm pattern for standard cabinet installations.
The Harmony Series 9442-10WN-P handle measures 4-7/16 inches in overall length, giving a hand grip that spans a useful portion of typical cabinet doors and drawers.
The Berenson Harmony weathered nickel pull has a 1-1/8 inch projection, setting the handle off the cabinet face so fingers can wrap behind it during opening and closing.
The Berenson Harmony weathered nickel pull is zinc die cast, giving the handle a solid feel and consistent form across multiple pieces in the same project.
The 9442-10WN-P cabinet pull is 11/16 inch wide, keeping the profile relatively slim while still offering a defined edge for gripping on doors and drawers.
The Harmony Series pull has 9/16 inch base dimensions at each mounting point, giving a compact footprint that sits neatly on narrow cabinet rails or stiles.
The Berenson Harmony weathered nickel pull in model 9442-10WN-P combines 3-3/4 inch (95 mm) center to center drilling with a 4-7/16 inch length to suit many cabinet and drawer fronts. Zinc die cast construction and a weathered nickel finish coordinate appearance across Harmony Series hardware runs. With 11/16 inch width, 1-1/8 inch projection, and 9/16 inch bases, this handle offers consistent proportions and clearance wherever it is installed on the project.
Sold In: 1 Each
