
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Harmony 128mm pull is a zinc die cast handle designed for cabinet and drawer fronts where a 5-1/16 inch center to center layout is already drilled or planned. The Harmony Series identity ties this pull to a consistent design family, which helps maintain a unified look across multiple doors and drawers in the same project. The weathered nickel finish presents a muted metal tone, which supports projects aiming for a softer, aged-metal appearance rather than a bright polished look. A total length of 5-11/16 inch means the handle extends beyond the screw centers to give a comfortable gripping area across standard cabinet rail widths. The 1-1/8 inch projection sets how far the pull stands off the surface, providing finger clearance while keeping the handle close enough to the face for tight spaces. A width of 11/16 inch gives a stable gripping surface that feels solid across everyday use.
The 5-1/16 inch center to center drilling dimension is the critical mounting reference for the Harmony Series 9448-10WN-P pull, because it dictates hole spacing on the cabinet or drawer front. Using this measurement, installers can plan consistent handle placement across a run of doors so every pull lines up horizontally and vertically. The 9/16 inch base dimensions indicate the size of each mounting foot, which defines the flat area needed on the surface and how much of the material around the screw hole will be covered. With a 1-1/8 inch projection, the pull stands off the face enough to grasp from above or below, which is important when positioning handles near adjacent doors or appliances. The 11/16 inch width further influences where the pull can fit on narrow rails or drawer fronts, since it shows how much side-to-side space the handle body occupies during installation.
This Harmony Series cabinet handle is specified with a 5-1/16 inch (128 mm) center to center dimension, so it fits best on cabinet doors and drawer fronts designed around that drilling pattern. The 5-11/16 inch overall length makes it well suited to medium-width fronts, giving enough visual presence without dominating smaller doors. Because the pull uses a weathered nickel finish, it works in projects targeting a worn-in metal appearance, such as traditional, transitional, or rustic-themed cabinetry. The zinc die cast construction places this pull in applications focused on decorative cabinet hardware rather than structural framing, where a shaped, finished handle is needed. With an 11/16 inch width and 9/16 inch base dimensions, this pull is sized for typical cabinet face frames and slab fronts, offering enough bearing surface while remaining compact on narrower rails.
The 5-1/16 inch center to center measurement on the 9448-10WN-P Harmony pull supports repeatable drilling jigs and templates, which helps maintain consistent alignment across multiple cabinets in a single job. The defined 1-1/8 inch projection provides a known stand-off value, which aids in planning clearances near wall returns, adjacent doors, or tall panels. Because the pull length is specified at 5-11/16 inch, installers can calculate edge distances for a balanced look on both doors and drawers, which reduces rework from repositioning hardware. The 11/16 inch width gives a predictable gripping surface, which matters when users operate heavier drawers and need enough contact area. The 9/16 inch base dimensions also contribute to a clean finished result by covering the drilled holes with a defined footprint, which helps maintain a neat appearance when the front surface has visible grain or pattern. The Harmony Series designation further supports future work by allowing specifiers to identify matching pieces within the same decorative hardware family.
The 9448-10WN-P Harmony pull uses a 5-1/16 inch (128 mm) center to center dimension, which guides hole spacing on cabinet doors and drawers for consistent alignment.
The Berenson Harmony 128mm pull has a total length of 5-11/16 inch, which sets the visual span of the handle across the cabinet or drawer front.
This weathered nickel cabinet pull has a 1-1/8 inch projection, creating the stand-off distance from the surface that allows fingers to grip behind the handle.
The Harmony Series cabinet handle is made from zinc die cast, giving the pull a solid metal body shaped for decorative hardware applications.
The 9448-10WN-P weathered nickel drawer pull is 11/16 inch wide, which defines the gripping surface and affects how it fits on narrow rails.
This Berenson cabinet hardware pull has base dimensions of 9/16 inch, which indicates the footprint each mounting foot covers around the screw holes.
The Harmony pull 128mm CC weathered nickel design gives installers clear dimensions for planning cabinet hardware layouts. With its 5-1/16 inch center to center drilling, 5-11/16 inch overall length, and 1-1/8 inch projection, the 9448-10WN-P model provides defined reference points for consistent placement across doors and drawers. The weathered nickel finish and zinc die cast construction tie appearance and structure together for decorative cabinet and drawer applications. When a project calls for a Harmony Series handle that fits the 128 mm layout and delivers a weathered nickel look, this pull is ready to drop into the specified drilling pattern.
Sold In: 1 Each