
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Toccata Series 3 inch pull is a zinc die cast handle finished in Weathered Nickel, so it brings a defined metallic look to doors and drawers while keeping a consistent style across the run. The 3 inch center to center drilling matches a common cabinet hole spacing, which lets this pull serve on many standard drawers and doors where that measurement is already laid out. Its overall length of 4-3/16 inches gives finger room beyond the fastener points, helping with grip on both smaller and mid-size fronts. A projection of 1-1/8 inches stands the pull off the surface enough for a full hand grab, which supports regular use on frequently opened cabinets. The 3/8 inch width keeps the profile slim, so it works where a lighter visual line is preferred. Base dimensions of 7/16 inch at each foot give a defined landing area on the cabinet face for a finished appearance.
The 3 inch center to center dimension on this Berenson Toccata pull sets the exact spacing for the mounting holes, which is critical when drilling new fronts or aligning with existing bores. Its 7/16 inch base dimensions define the footprint where each foot meets the cabinet, which helps plan for coverage over prior hardware marks or finish transitions. The 1-1/8 inch projection establishes the stand-off from the door or drawer face, which directly affects hand clearance and how the pull feels when grabbed from above or below. With a 4-3/16 inch overall length, the pull spans slightly beyond the fastener centers, giving extra leverage on wider drawers without taking up excessive space on smaller fronts. The zinc die cast construction provides a single-piece body, which supports predictable drilling and alignment along a straight hardware line.
This Berenson Toccata Series 3 inch center to center pull fits well on cabinet doors and drawers that are drilled on the 3 inch pattern, giving continuity where that layout already exists. Its Weathered Nickel finish works in projects calling for a softer nickel tone, tying together hinges, latches, and other visible decorative hardware in similar finishes. The 4-3/16 inch overall length suits many kitchen and bath drawers where the hardware should be present but not dominant, and it also adapts to utility cabinets using the same hole spacing. A projection of 1-1/8 inches keeps hands off the door face during pull, which is useful on painted or stained surfaces that see frequent use. With a 3/8 inch width and 7/16 inch base dimensions, the pull fits comfortably on narrower rails and stiles, supporting layouts where space is tight between neighboring fronts.
The zinc die cast material of the Toccata pull creates a uniform shape from piece to piece, which helps maintain straight sight lines along a bank of doors when multiple pulls are installed. Its defined 3 inch center to center dimension lets installers rely on a repeatable drilling pattern, which supports efficient jig use and consistent hardware spacing. The 7/16 inch base at each foot gives a clear contact patch on the cabinet face, which can help cover minor finish variations around the hole area for a cleaner look. With 1-1/8 inch projection, the pull keeps a steady stand-off from the surface, so each handle along a run offers the same hand clearance and feel. The Weathered Nickel finish stays consistent within the Toccata Series, allowing a project to use this pull across doors and drawers while keeping a unified decorative hardware appearance. The 3/8 inch width contributes to a controlled profile, which aids in aligning multiple pulls so they read as a continuous line across adjacent fronts.
The Berenson Toccata pull uses a 3 inch center to center measurement, so mounting holes are set 3 inches apart, which aligns with a widely used cabinet drilling pattern.
The pull has an overall length of 4-3/16 inches, which provides added grip area beyond the 3 inch mounting points for doors and drawers.
This Weathered Nickel pull projects 1-1/8 inches from the cabinet face, giving hand clearance that supports everyday opening and closing.
The 8246-1WN-P Berenson pull is zinc die cast, which gives it a solid, consistent body suited to repeated use along cabinets and drawers.
The Toccata Series pull is 3/8 inch wide, which keeps its profile slim on narrow rails while still defining a clear gripping surface.
Each base on this Berenson handle measures 7/16 inch, creating a defined footprint where the pull meets the cabinet surface.
The Berenson Toccata Series 3 inch center to center pull combines zinc die cast construction, a Weathered Nickel finish, and defined mounting dimensions, giving a clear option when planning a coordinated run of cabinet hardware. Its 4-3/16 inch length, 1-1/8 inch projection, and 3/8 inch width balance grip space with a controlled profile, supporting both doors and drawers drilled on the 3 inch pattern. With the 8246-1WN-P part number, this pull ties directly to the Toccata Series, so it can be specified with confidence for jobs calling for that style and finish.
Sold In: 1 Each