Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage Three pull gives cabinets a defined 3-3/4 inch center to center grip, so hole spacing matches standard 96 mm layouts common in cabinet and drawer work. The zinc die cast material creates a solid metal handle body that stays stable when doors and drawers are opened repeatedly across a project. A weathered nickel finish presents a muted metal tone that works in decorative hardware and moldings where a softer look is preferred over bright chrome. The pull length of 3-11/16 inch keeps the handle footprint compact, which suits narrower drawer fronts or tight runs of doors. A width of 9/16 inch provides enough surface for fingers to grab the handle without crowding adjacent hardware. A 1-3/16 inch projection gives uniform clearance off the face of the cabinet, helping hands clear the door surface while keeping the pull close to the front for a streamlined line.
The 96 mm center to center dimension gives a clear drilling reference, so installers can set up boring patterns once and repeat them across entire cabinet runs. The 3-11/16 inch overall length keeps the handle ends slightly beyond the screw holes, which helps visually center the pull over the mounting points. A 1/2 inch base diameter defines the footprint around each hole, aiding alignment along door rails and drawer fronts. The 1-3/16 inch projection ensures that when the pull is mounted, the gripping area stands off the cabinet face enough for fingers to wrap around the handle while staying close enough to maintain a low-profile installation line.
This Berenson 9358-10WN-P pull is set up for cabinet and drawer applications that use 3-3/4 inch center to center drilling, tying directly into standard hardware layouts. The weathered nickel finish positions the pull for decorative hardware and moldings where a transitional style is needed between traditional and contemporary faces. With an overall length of 3-11/16 inch, the handle fits well on mid-size doors and drawers, avoiding overhang on narrow fronts. A projection of 1-3/16 inch keeps the gripping surface offset from the cabinet face, which supports everyday opening of base cabinets, wall cabinets, and utility storage fronts. The 9/16 inch width offers enough surface for fingers to grab, while the 1/2 inch base diameter keeps the contact area visually clean along stiles and rails.
The defined 96 mm center to center spacing allows installers to use a single drilling template for every Berenson Transitional Advantage Three pull on the job, which supports consistent alignment down cabinet banks. Zinc die cast construction means each handle is produced to the same formed profile, helping rows of pulls line up with matching shapes and clearances. The 1-3/16 inch projection sets a uniform stand-off from the cabinet face, so doors and drawers across a kitchen or shop run present the same depth and feel when gripped. The 3-11/16 inch length and 9/16 inch width work together to keep the handle centered over the mounting holes, giving a balanced appearance when spaced equally from door edges. A 1/2 inch base diameter defines a precise landing point, which helps installers visually square each pull relative to the cabinet geometry.
The Berenson Transitional Advantage Three pull has a 3-3/4 inch (96 mm) center to center dimension, which ties directly into standard cabinet drilling layouts for straightforward placement.
The Berenson 9358-10WN-P pull is made from zinc die cast, giving the handle a solid metal body that supports repeated cabinet and drawer operation.
The weathered nickel pull has a 1-3/16 inch projection, which provides finger clearance off the cabinet face while keeping a relatively low profile installation.
The cabinet pull has an overall length of 3-11/16 inch and a width of 9/16 inch, creating a compact handle footprint suited to many door and drawer sizes.
The Berenson Transitional Advantage Three pull uses a weathered nickel finish, giving it a subdued metal look suitable for decorative hardware and moldings projects.
This cabinet pull uses 8-32 x 1 inch screws, so the mounting interface matches a standard threaded connection used in many cabinet hardware setups.
The Berenson Transitional Advantage Three Series 3-3/4 inch (96 mm) center to center weathered nickel pull provides defined dimensions and a zinc die cast build that suit consistent cabinet layouts. At Wurth Baer Supply, this handle fits projects calling for a compact, transitional-style pull with a 96 mm drilling pattern. When cabinets or drawers are laid out around that center to center measurement, this pull delivers a weathered nickel finish, 3-11/16 inch length, 9/16 inch width, and 1-3/16 inch projection that work together to support uniform, repeatable hardware placement across the installation.
Sold In: 1 Each
