Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Deltana P310U15A adjustable bar pull gives a 2 inch to 4-1/4 inch center-to-center range, so one pull can align with different existing hole spacings on cabinets or furniture and support layout flexibility during new work or updates. The stated 59mm to 108mm centers convert the inch range into metric, which helps when layouts or shop drawings are done in millimeters and when coordinating with European drilling patterns. The product is described as an adjustable bar pull, which identifies it as a straight, bar-style handle that can suit both doors and drawers where that look is preferred in a project. The antique nickel description indicates a nickel-based finish toned for a softer, aged appearance, which can tie in with other antique nickel decorative hardware in the same room. Being in the handles and pulls class places it among functional operating hardware rather than decorative trim only, so it is meant to be grasped and used regularly on working cabinetry.
The adjustable center range from 2 inches to 4-1/4 inches lets this Deltana P310U15A adjustable bar pull align with different hole spacings, which is useful when working on cabinetry where existing drilling cannot be changed easily. The 59mm to 108mm metric description pairs with that range so installers working from metric shop drawings can translate positions directly, supporting accurate drilling in the field. Listing this product in the handles and pulls category clarifies that it is intended for door and drawer operation, so hole placement is planned at comfortable reach points rather than purely decorative locations. The combination of inch and metric center measurements also supports ordering and layout across projects that mix hardware specified in different measurement systems.
The Deltana P310U15A adjustable bar pull is identified as a handle in the handles and pulls category, which positions it for use on cabinet doors and drawers in woodworking projects. The 2 inch to 4-1/4 inch center-to-center adjustment means it can be applied where short pulls or moderate-length pulls are appropriate, such as on standard kitchen doors, vanity fronts, or furniture-scale casework that does not require extra-long hardware. Because the centers are defined in both inches and 59mm to 108mm metric, this pull suits projects that may be laid out with either system, aligning with cabinetry produced in shops that cut, bore, and drill using imperial or metric settings. The antique nickel finish description gives it a specific visual character, which fits designs that call for a nickel tone with a slightly aged look, keeping the hardware within a coordinated finish family on the project.
The adjustable centers from 2 inches up to 4-1/4 inches let the Deltana P310U15A adjustable bar pull adapt to a range of hole spacings, which can simplify replacement work where original drilling varies from cabinet to cabinet. The 59mm to 108mm metric equivalent offers clear reference points for boring patterns set on metric machines, supporting consistent hole placement when repeating the same pull across a run of doors and drawers. By covering a defined span of common center-to-center distances, this adjustable bar pull can reduce the variety of pulls that need to be specified on a job with slightly different panel sizes, since one model can handle multiple layouts. The bar pull configuration noted in the name also creates a straight gripping surface, which aligns easily along stiles or rails and supports visually straight hardware lines when installed across a bank of fronts.
The Deltana P310U15A adjustable bar pull covers 2 inch to 4-1/4 inch centers, so it can match a variety of cabinet door and drawer hole spacings on a single project.
The 59mm to 108mm center range provides a direct metric reference for the same adjustment span, which supports accurate drilling when cabinet layouts or machines are set in millimeters.
The P310U15A adjustable bar pull is classified under handles and pulls, so it suits working cabinet doors and drawers where a functional operating pull is required.
The antique nickel description defines a specific finish tone, which helps coordinate this adjustable bar pull with other antique nickel decorative hardware on the same cabinetry.
The listing of 2 inch to 4-1/4 inch and 59mm to 108mm centers lets the same pull be specified from imperial or metric drawings, simplifying communication between design and shop.
The bar pull style identifies a straight, linear grip, giving users a familiar handhold on doors and drawers and supporting clean visual lines across cabinet fronts.
The Deltana P310U15A adjustable bar pull pairs an adjustable 2 inch to 4-1/4 inch (59mm to 108mm) center range with an antique nickel finish, so it fits projects needing both drilling flexibility and a defined finish tone. As a handles and pulls category product, it is intended for active cabinet doors and drawers where dependable operation is important. For work that spans imperial and metric measurements while keeping a consistent hardware look, this adjustable bar pull offers one part number that addresses both layout and finish requirements.
Sold In: 1 Each