Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Burke 3 inch pull gives cabinets and drawers a defined, square-edged grip that suits updated kitchens and built-ins. The Burke Collection design uses thick blocks and square details, so the pull reads clean and structured on face frames and slab fronts. A vintage bronze finish provides a darker, traditional tone that works where warm metals are preferred over bright chrome. The pull has a 3 inch center to center drilling, which aligns with one of the most common hole spacings used in cabinet layouts. With a 3-7/16 inch overall length, this pull covers existing 3 inch holes while leaving a balanced reveal at each end. A 1/2 inch width keeps the profile slim so it will clear adjacent hardware on tight drawer stacks. Projection of 15/16 inch brings the grip off the door just enough for fingers without catching clothing in busy work areas.
This Belwith Keeler Burke Series 3 inch center to center pull uses a fixed 3 inch mounting spread, so it aligns directly to standard pre-drilled cabinet fronts. With an overall length of 3-7/16 inch, the pull visually centers over the holes while leaving modest extensions at each end for a balanced appearance. The 1/2 inch width keeps the footprint narrow, making it easier to fit multiple pulls on smaller drawer fronts without crowding. A projection of 15/16 inch provides functional finger clearance, so users can comfortably grab the pull while doors still open fully near walls, appliances, or adjacent cabinets.
The Burke Collection design, with its thick blocks and square details, works especially well on cabinet runs where straight lines and squared profiles are part of the overall look. On kitchen or bath cabinets, the 3 inch center to center layout fits many existing drill patterns, so this pull serves both new construction and refresh work that keeps current hole spacing. The 3-7/16 inch overall length fits comfortably on standard-width drawer fronts and cabinet doors, offering enough length for a firm grip without overwhelming smaller fronts. A 1/2 inch width keeps the pull visually light, which helps when repeating the hardware across full-height pantry doors or stacked drawers. The vintage bronze finish suits projects that favor a warmer aesthetic, helping the pull sit between dark oil-rubbed tones and lighter bronzes on the color spectrum.
The defined 3 inch center to center dimension gives installers a precise drilling reference, helping maintain straight, level hardware lines across long banks of cabinets. When replacing existing 3 inch pulls, this same spacing allows reuse of the current hole pattern, reducing layout steps while still updating the style. The 3-7/16 inch overall length reliably spans the holes and covers minor chipping or wear near the drill points, which can clean up older fronts during upgrades. At 15/16 inch projection, the pull keeps a low profile yet creates consistent finger clearance from door to door, supporting smooth, repeatable user experience across a whole room. The zinc construction provides uniform weight and feel from piece to piece, so every installed pull reacts similarly under hand, which matters on drawers that see frequent daily use.
The Belwith Keeler P3571-VB Burke pull uses a 3 inch center to center spacing, which matches a common cabinet drilling pattern for straightforward layout and replacement work.
The Belwith Keeler Burke 3 inch pull has a 3-7/16 inch overall length, so it slightly overhangs the 3 inch hole spread and neatly covers the area around the mounting points.
This vintage bronze cabinet pull projects 15/16 inch from the door or drawer face, creating consistent finger clearance while still keeping the hardware close to the surface.
The Burke Collection P3571-VB pull is made from zinc, giving it a solid feel and uniform construction suitable for repeated use on cabinet doors and drawers.
This Belwith Keeler Burke Series cabinet pull is 1/2 inch wide, which keeps the footprint narrow for use on smaller fronts or tight drawer stacks.
The P3571-VB Burke cabinet pull uses a vintage bronze finish, providing a warm, darker tone that coordinates with many wood stains and painted cabinet colors.
The Belwith Keeler Burke Series 3 inch center to center vintage bronze pull combines a defined square design, zinc construction, and precise 3 inch drilling for cabinet projects. The 3-7/16 inch length, 1/2 inch width, and 15/16 inch projection keep the hardware practical across doors and drawers. For jobs built around standard 3 inch hole spacing and a warm bronze finish, this P3571-VB pull offers a consistent, repeatable choice for updating or completing cabinet runs.
Sold In: 1 Each