Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Serendipity pull is a zinc cabinet handle in the Iced Tea Nickel finish designed for decorative cabinet hardware applications. The 5-1/16 inch (128 mm) center to center mounting creates a standard pull layout, which supports consistent drilling and repeatable installation across cabinet runs. The overall length of 6-9/16 inches provides hand clearance along the drawer or door edge, helping users get a solid grip in day-to-day use. A 1-1/4 inch projection sets the pull off the cabinet face, which helps fingers clear the door surface while still keeping the profile tight to the cabinetry. The 5/8 inch width concentrates the visual line of the Serendipity Series design, so the pull reads as a clean, contemporary accent on both doors and drawers.
The 128 mm (5-1/16 inch) center to center mounting length gives you a fixed measurement for drilling, which helps keep handle spacing uniform across multiple doors and drawers. With a 6-9/16 inch overall length, the pull extends past the screw locations, which creates a defined grasp area on both sides of the mounting points. The 1-1/4 inch projection keeps the handle comfortably off the cabinet surface so fingers can wrap behind it during operation. At 5/8 inch wide, the face of the pull stays narrow, which allows precise placement on rails and stiles without crowding neighboring details.
This Belwith Keeler Serendipity Series pull is part of the Serendipity Collection, which is described as inspired by contemporary shapes found in Japanese design and enriched with the abstraction of organic shapes. That design intent positions the pull for modern and transitional cabinet projects where a streamlined handle is preferred. The Iced Tea Nickel finish defines the color profile, so the pull presents as a coordinated decorative hardware choice wherever that finish is specified across a room. Because the pull belongs to a named collection, it can be matched visually with other Serendipity Series pieces on the same project to keep a consistent look from door to door.
The zinc construction means the entire handle is formed from a single noted material, which supports a solid-feeling grip when the pull is installed on frequently used cabinet doors and drawers. With an overall length of 6-9/16 inches combined with a 5-1/16 inch center to center dimension, the pull scales well to medium-width fronts, allowing enough bar length for a comfortable hand placement. The 5/8 inch width keeps the design visually light while the 1-1/4 inch projection supports finger clearance, so the pull remains functional without visually dominating the cabinet face.
The 5-1/16 inch (128 mm) center to center measurement serves as a repeatable standard when aligning multiple Belwith Keeler cabinet handles along a bank of doors or drawers. Using that fixed spacing allows jigs and templates set to 128 mm to translate directly to this HH74731-ITN cabinet pull, which supports consistent hole placement from cabinet to cabinet. The stated 6-9/16 inch overall length is longer than the drilling span, so after mounting, the visible ends of the pull extend beyond the screw points to create a balanced appearance at each installation position.
The 1-1/4 inch projection defines how far the handle sits off the face of the cabinet, which influences both ergonomics and clearances near adjacent doors, walls, or trim. At 5/8 inch in width, the pull front remains slender, aiding alignment on narrow rails where space between edges is limited. The Iced Tea Nickel finish is identified specifically, which allows the pull to be specified alongside other decorative cabinet hardware called out in the same finish, reducing finish variation across a room. With the Serendipity name and Belwith Keeler branding tied to the HH74731-ITN manufacturer part number, the pull can be reordered consistently for future cabinet additions or matching projects.
This Belwith Keeler Serendipity pull has a 5-1/16 inch (128 mm) center to center dimension, which sets the spacing for drilling and aligning cabinet mounting holes.
The pull length is 6-9/16 inches, so it spans a noticeable section of the door or drawer front and provides a defined gripping area beyond the mounting points.
The HH74731-ITN cabinet pull is made of zinc, giving the Serendipity design a solid metal body for everyday cabinet door and drawer use.
The projection is 1-1/4 inch, setting the distance from the cabinet face so fingers can comfortably grip behind the pull during operation.
This Serendipity Collection pull is 5/8 inch wide, creating a slim front profile that works well with contemporary cabinet designs.
This Belwith Keeler cabinet handle uses the Iced Tea Nickel finish, allowing it to coordinate with other decorative cabinet hardware in the same finish.
The Belwith Keeler Serendipity Series 5-1/16 inch (128 mm) center to center Iced Tea Nickel pull HH74731-ITN combines a defined drilling span, a 6-9/16 inch overall length, and a 1-1/4 inch projection to support practical cabinet operation. With zinc construction, a 5/8 inch width, and a specified Iced Tea Nickel finish, this handle provides a clear set of dimensions and appearance details for coordinating your cabinet hardware layout.
Sold In: 1 Each