SurfPrep ProFoam sanding pad is a 4 inch by 3 inch hand sanding abrasive pad built around a 5 mm ProFoam layer in a medium grit range. The pad is part of SurfPrep abrasive pads and sponges, giving installers and woodworkers a familiar format for controlled hand sanding. The medium grit is identified as 120-150, so it cuts material while still aiming toward a smoother surface preparation step. The no hole design keeps the abrasive face solid, which suits hand use where dust extraction holes are not required in the pad itself. A hook and loop backing on the pad lets it pair with compatible hook and loop hand sanding blocks or be used directly by hand with easy repositioning during work.
This 4 inch by 3 inch SurfPrep ProFoam sanding pad fits naturally in the hand for direct manual sanding over wood or other workpieces. The 5 mm ProFoam base supports the abrasive during strokes while still allowing some give against the surface. The hook and loop backing is designed to mate with hook and loop style hand sanding blocks when a firmer grip or backing is desired. The medium grit face, described as 120-150, places the pad in a working range often used before finer finishing steps, so it can serve as an intermediate or general-purpose hand sanding option in an abrasive sequence.
The SurfPrep ProFoam sanding pad belongs to the abrasives and hand sanding category, so it is naturally aimed at tasks where powered sanding is either unnecessary or too aggressive. The 4 inch by 3 inch format works on cabinet parts, trim pieces, and similar components that benefit from a compact pad that can reach edges and profiles. The 5 mm ProFoam structure differentiates it from rigid sheets by supporting use on slightly contoured or irregular areas while still handling flat faces. As a medium grit, identified with a 120-150 range, the pad sits at a point in the abrasive progression where surfaces are being refined from coarser steps toward finish-ready stages. Within a SurfPrep abrasive pads and sponges lineup, this pad can be selected when a hand sanding option is needed that balances stock removal with surface refinement.
The consistent 4 inch by 3 inch footprint of the SurfPrep ProFoam sanding pad helps installers repeat hand motions with predictable coverage, which improves uniformity across multiple parts. The 5 mm ProFoam layer acts as a built-in cushioning and support layer, helping the abrasive face stay in contact across slight highs and lows rather than just point-loading hard spots. With a medium 120-150 grit rating, the pad provides an expected scratch pattern suited to follow coarser grits while preparing the surface for finer abrasives, which simplifies planning grit sequences. The hook and loop backing lets the same pad shift quickly between direct hand use and hook and loop hand blocks, supporting repeatable setups without changing to a different abrasive format. The clearly defined SurfPrep SP3X4PF5MB-200 part number ties reorders back to the exact pad type that produced earlier results.
The SurfPrep ProFoam sanding pad measures 4 inches by 3 inches with a 5 mm ProFoam layer, giving a compact hand-sized pad that is easy to control on smaller work surfaces.
The pad is described as medium 120-150 grit, placing it between coarse stock removal abrasives and fine finishing grits in a typical sanding sequence.
The 5 mm ProFoam layer adds a foam-backed structure that lets the abrasive conform better to slight contours while still supporting flat sanding strokes.
The pad is described as H&L, indicating a hook and loop backing that allows quick attachment to compatible hand sanding blocks or direct hand-held use.
The medium 120-150 grit SurfPrep ProFoam sanding pad fits stages where material shaping is largely complete and the surface is being refined toward later finishing grits.
This SurfPrep hand sanding pad carries the manufacturer part number SP3X4PF5MB-200, helping users reorder the exact same abrasive pad.
The SurfPrep ProFoam sanding pad in 4 inch by 3 inch by 5 mm ProFoam with a medium 120-150 grit face provides a hand sanding option that balances cut and surface refinement. The hook and loop backing supports quick changes during jobs that move through multiple abrasive steps. With its clearly defined SurfPrep SP3X4PF5MB-200 part number and place within abrasive pads and sponges, this pad can be added confidently to a hand sanding lineup when a medium grit ProFoam option is needed.
Sold In: 200 Each