SurfPrep ProFoam medium plus sanding pad is a 4 inch by 3 inch by 1/2 inch foam abrasive designed for hand sanding in woodworking and similar abrasive applications. The SurfPrep brand and abrasive pads and sponges product class place this pad in a trade-focused line used for controlled material removal. The medium plus grit range of 150 to 180 provides a balance between stock removal and surface refinement, useful when preparing workpieces between coarser shaping and finer finishing steps. The foam construction allows the pad to conform to slight contours while still keeping a defined working face, helping maintain a consistent scratch pattern across edges and flat areas. The compact 3 inch by 4 inch size offers good control in tight spots or on smaller parts, supporting careful work on doors, drawer fronts, face frames, or similar components.
This SurfPrep ProFoam pad in medium plus grit fits into sanding workflows where an installer or finisher needs more refinement than coarse shaping grits but still wants noticeable cutting action. The 150 to 180 grit level suits tasks like smoothing previous sanding marks or preparing surfaces between coats in an abrasive sequence. The 1/2 inch foam thickness gives enough depth to grip comfortably while keeping the working face stable, which helps maintain even pressure along an edge or across a stile. Because it is built for hand sanding, the pad supports directional sanding that follows grain or specific profiles, aiding in blending repairs and transitions on visible surfaces.
The 4 inch by 3 inch footprint allows this SurfPrep ProFoam medium plus grit pad to perform well on cabinet parts, trim pieces, and similar woodworking components where a compact pad improves control. Its classification under abrasives and hand sanding means it is intended for operations performed directly by hand rather than on machines, matching tasks such as breaking edges, leveling small surfaces, or cleaning up minor imperfections. The 1/2 inch thickness offers enough foam depth to flex slightly on profiles yet stay firm enough for flat faces, which supports use across face frames, drawer parts, and other pieces that mix flat and detailed areas in one setup.
The medium plus 150 to 180 grit range on this SurfPrep ProFoam SP3X4PFHDMPB-100 pad positions it as an intermediate step that refines surfaces without jumping directly to very fine grits, which helps control the scratch pattern from one sanding stage to the next. By placing abrasive on a foam core, the pad distributes hand pressure more evenly than bare paper, helping reduce isolated pressure points that can cut deeper lines. The defined 4 inch by 3 inch face also makes it easier to track coverage across a panel or stile, so the technician can keep sanding passes uniform and maintain a more consistent finish ready for subsequent sanding or finishing steps.
The SurfPrep ProFoam medium plus pad measures 4 inches by 3 inches by 1/2 inch, giving a compact sanding face that supports controlled hand work on smaller or detailed parts.
The pad carries a medium plus 150 to 180 grit range, which supports intermediate sanding where you need noticeable cutting while still moving toward a smoother surface.
The ProFoam construction places abrasive on a foam core that allows controlled flex, helping the pad follow modest contours while maintaining an even scratch pattern.
The pad is classified under abrasives and hand sanding, so it is designed for manual sanding tasks such as smoothing cabinet parts, trim, and similar woodworking pieces.
The 1/2 inch thickness provides a comfortable foam depth to grip while keeping the working face stable, which supports consistent pressure on edges and flat surfaces.
The SP3X4PFHDMPB-100 manufacturer part number identifies this specific SurfPrep ProFoam medium plus 4 inch by 3 inch by 1/2 inch hand sanding pad configuration.
The SurfPrep ProFoam medium plus grit 4 inch by 3 inch by 1/2 inch sanding pad offers a defined combination of size, foam construction, and 150 to 180 grit range for hand sanding work. Its role in the abrasive pads and sponges category and its SurfPrep branding clearly position it as a professional option for intermediate sanding stages. When you need a compact foam pad that balances cut and surface refinement on wood and similar materials, this SP3X4PFHDMPB-100 configuration from Wurth Baer Supply provides a focused, job-ready choice.
Sold In: 100 Each