Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding pad Medium+ Grit 7" x 3" x 5 mm No Hole Sanding Pad, SP3X7PF5MPB-100 is a foam abrasive pad designed for hand sanding. The SurfPrep brand and Abrasive Pads and Sponges product class identify it as a pro-focused option for surface preparation. The pad size of 7 inches by 3 inches provides a hand-friendly footprint that covers a reasonable area with each pass, which supports efficient progress on flat or slightly contoured parts. The 5 mm foam thickness creates a conformable layer between hand and surface, which helps the abrasive follow minor profiles while reducing pressure points. The Medium+ grit range identified as 150-180 offers a balance between stock removal and surface refinement, which suits general purpose sanding on woodworking or similar substrates where consistent scratch is important before finishing or further steps.
This SurfPrep ProFoam Medium+ grit pad, at 7 inches by 3 inches, fits typical hand sanding motions along edges or across small panels, which supports repeatable strokes without constant repositioning. The 5 mm foam thickness under the abrasive face cushions the contact with the surface, which helps distribute hand pressure more evenly during use. The Medium+ 150-180 grit range positions this pad between coarse leveling and fine polishing, which makes it suitable as a working grit in multi-step sanding sequences. As an Abrasive Pads and Sponges product, it aligns with hand sanding where operators rely on feel and control rather than machine-driven passes.
The SurfPrep ProFoam Medium+ Grit 7" x 3" x 5 mm No Hole Sanding Pad, SP3X7PF5MPB-100 belongs to the Abrasives | Hand Sanding category, which positions it for manual sanding tasks rather than powered sanding. The 7 inch by 3 inch footprint suits cabinet parts, trim pieces, and other work where the operator guides the pad along grain or profiles for controlled material removal. The 5 mm foam body places it in the Abrasive Pads and Sponges class, which signals a flexible abrasive carrier instead of a rigid sheet, so it can adapt to slight curves or eased edges. The Medium+ grit, tied to a 150-180 range, matches common steps where surfaces are refined after heavier cutting or prepared before finer sanding or finishing, which keeps it useful across multiple stages of surface prep.
The SurfPrep ProFoam construction combines a foam core with an abrasive layer, which lets the 5 mm thickness moderate hand pressure during sanding and helps reduce gouging when working across edges. The Medium+ 150-180 grit range gives the pad enough cut to clean up minor surface marks while still leaving a manageable scratch profile for next-step abrasives, which supports a predictable workflow. The No Hole Sanding Pad design presents a continuous abrasive face, which maintains uninterrupted contact on the workpiece and simplifies orientation during direction changes. The defined 7 inch by 3 inch size repeats from pad to pad, which helps operators develop consistent stroke patterns and coverage across batches of parts.
This SurfPrep ProFoam Medium+ pad is specified in the 150-180 grit range, which supports mid-stage sanding where both defect removal and surface refinement are important.
The SP3X7PF5MPB-100 pad measures 7 inches by 3 inches, which gives a hand-friendly area for controlled strokes over panels, rails, or trim.
The pad has a 5 mm foam thickness, which cushions the abrasive contact and helps the pad follow slight contours during hand sanding.
This product is in the Abrasives | Hand Sanding category and Abrasive Pads and Sponges class, so it is intended for manual sanding tasks.
The No Hole Sanding Pad design keeps the abrasive surface continuous, which maintains even contact on the workpiece during hand sanding strokes.
The Medium+ description, tied to 150-180 grit, indicates a mid-level cut suitable for general surface preparation between coarse shaping and fine finishing.
The SurfPrep ProFoam Medium+ Grit 7" x 3" x 5 mm No Hole Sanding Pad, SP3X7PF5MPB-100 combines a defined 7 by 3 inch footprint, 5 mm foam body, and 150-180 Medium+ grit in a hand sanding format. That mix supports controlled material removal and surface refinement on shop projects where an Abrasive Pads and Sponges product from the SurfPrep brand aligns with existing abrasive setups. Choosing this pad aligns grit, size, and foam thickness to hand sanding workflows that prioritize feel, coverage, and repeatable results.
Sold In: 100 Each