SurfPrep Profoam sanding pad in Medium+ 150-180 grit provides an abrasive surface that cuts while still refining, which helps installers and finishers control material removal without jumping between multiple grits. The pad size listed as 3-2/3 x 7 x 5 mm gives a narrow, hand-friendly format that reaches into parts and edges where larger sheets feel clumsy. The 5 mm thickness identifies this as a thin foam construction, so the pad can flex with light pressure and stay in contact across small contours. A 10-hole pattern in the pad works with matching vacuum designs to draw dust away from the work area, which supports better visibility and reduces abrasive loading during sanding. As an abrasive pad and sponge in the hand sanding category, it supports detail work where power tools are not the best option or where more control is needed around edges.
The 3-2/3 inch by 7 inch footprint on this SurfPrep Profoam Medium+ pad creates a long, narrow contact area, so users can run the pad along edges and flat runs with predictable tracking. A 5 mm thickness keeps the foam layer thin enough that pressure from the hand transfers efficiently to the abrasive surface, which helps when a consistent scratch pattern is important before finishing steps. The Medium+ 150-180 grit range defines the pad as suited to intermediate and pre-finish sanding rather than heavy stock removal, which supports sequences where surfaces are already machined or previously sanded. With this combination of grit, size, and thickness, the SP3X7PF5MP.10-25 part number can be slotted into established sanding workflows where a controllable, hand-held abrasive is needed.
This SurfPrep Profoam Medium+ 150-180 grit 3-2/3 x 7 x 5 mm pad works within abrasive pads and sponges tasks where hand sanding is preferred, such as detail areas on woodworking or cabinetry projects. The compact 3-2/3 inch width allows the pad to track along narrow faces, helping users maintain straight lines on rails and stiles. At 7 inches long, the pad covers a reasonable span, so each stroke conditions more surface while still fitting in confined areas. The 5 mm foam body provides a firm feel with some compliance, so the pad can address light profiles without dramatically changing edges. As a SurfPrep hand sanding pad, it fits shops already using SurfPrep abrasives and looking to match a Medium+ cut level in this specific size and thickness. The 10-hole design supports applications where dust extraction is part of the hand sanding setup.
The Medium+ 150-180 grit classification helps users repeat a consistent step in their sanding sequence because the cut level is clearly defined between coarse shaping and very fine finishing. The 3-2/3 x 7 inch format is consistent from pad to pad, which simplifies matching hand motions and pressure patterns across multiple parts on the same job. At 5 mm thick, the foam layer limits how much the pad can roll over edges, so users can better control corner sharpness when working around door profiles or trim. The 10-hole arrangement gives regular spacing for dust extraction, which can help keep the abrasive surface from clogging and maintain its cutting character for longer stretches of work. With the SP3X7PF5MP.10-25 identifier tying all these details together, shops can reorder the same configuration and keep sanding results predictable.
The SurfPrep Profoam Medium+ pad is rated at 150-180 grit, which positions it for smoothing and pre-finish sanding where material has already been machined or previously sanded.
The SP3X7PF5MP.10-25 pad is listed at 3-2/3 inches by 7 inches with a 5 mm thickness, giving a long, narrow pad suited to hand sanding edges and flat runs.
The 5 mm foam thickness keeps the pad relatively thin and firm, helping transfer hand pressure efficiently while still offering enough compliance to follow light contours.
The 10-hole design provides openings that work with compatible dust extraction approaches, helping move sanding dust away from the surface to support clearer visibility and more consistent cutting.
The Medium+ 150-180 grit pad fits between coarse shaping and very fine finishing, serving as an intermediate step to refine machine marks or previous scratches before later stages.
This SurfPrep hand sanding pad is part of the abrasives and hand sanding category, aligning it with manual sanding tasks on woodworking or cabinetry where controlled abrasive contact is important.
The SurfPrep Profoam Medium+ 150-180 grit 3-2/3 x 7 x 5 mm 10-hole sanding pad, identified as SP3X7PF5MP.10-25, combines a defined grit range, compact dimensions, and a thin foam body. These characteristics support detail and pre-finish hand sanding steps where controlled material removal and consistent scratch patterns matter. For shops standardizing on SurfPrep abrasives and looking to match a Medium+ level in a foam pad, this configuration offers a repeatable option keyed to a specific size and foam thickness. When a sanding workflow calls for this combination of grit, footprint, and 10-hole design, this pad provides a focused choice.
Sold In: 25 Each