SurfPrep ProFoam sanding pad in the SP3X7PF5MB.10-100 configuration is a medium grit foam abrasive pad sized 7 inches by 3 inches with a 5 mm foam thickness, giving a predictable hand-sanding footprint that suits flat and slightly contoured surfaces. The pad is part of SurfPrep's ProFoam line of abrasive pads and sponges, so it is built for repeatable, controlled stock removal rather than aggressive grinding. Its medium grit rating, identified in the SAP description and web description, aligns with the 120-150 grit range, so it cuts coatings and wood fibers cleanly while still leaving a surface ready for further finishing steps. This pad sits in the Abrasives and Hand Sanding category, which positions it for shop work where installers and fabricators rely on consistent manual touch-ups around edges, profiles, and smaller panels.
This SurfPrep ProFoam medium grit hand sanding pad uses its 7 inch by 3 inch footprint, described as 3-2/3 x 7, to give a coverage area that works efficiently across cabinet components while still fitting into narrower parts. The 5 mm foam layer supports the abrasive with a modest cushion, so pressure spreads more evenly across the surface instead of concentrating at a single point. Its 10-hole configuration, stated in the SAP description, forms a repeating vent pattern across the pad that allows air and dust to move away from the sanding face when used in systems that support that pattern, maintaining a more consistent cut. Being specifically identified as a medium grit pad combines controlled cutting with surface refinement, so it aligns well with intermediate sanding stages in a woodworking workflow.
The SurfPrep ProFoam medium grit pad sits clearly in the Abrasives and Hand Sanding category, so it is suited to tasks where a sanding block or machine might be too rigid or too aggressive. Its 3-2/3 x 7 inch sizing, documented in the SAP description, lines up well with common cabinet and furniture components such as rails, stiles, and drawer parts, giving coverage that is long enough to bridge across small surface defects but compact enough to navigate around joinery. The 5 mm foam thickness gives the ProFoam pad just enough compliance to follow gentle contours or edge breaks common in woodworking, which supports consistent scratch patterns along profiles and corners. As a SurfPrep abrasive pad and sponge product, it is positioned for professional environments where the same pad shape and thickness recur across multiple parts, aiding repeatable results from piece to piece.
The SP3X7PF5MB.10-100 manufacturer part number uniquely identifies this specific SurfPrep ProFoam pad configuration, so shops can reorder the exact 7 inch by 3 inch, 5 mm thick, medium grit, 10-hole pad that matches established processes. The medium grit range of 120-150, taken from the web description, means the scratch profile falls in an intermediate stage, which suits leveling between coats or refining machine-sanded surfaces without stepping back to coarse abrasives. The 10-hole feature, described in the SAP documentation, contributes to dust movement pathways across the pad when used in compatible setups, supporting cleaner abrasive surfaces during longer sanding runs. Because it is cataloged as an abrasive pad and sponge within SurfPrep's ProFoam line, users can expect the same foam support and grit behavior from pad to pad, which helps keep finishing workflows consistent on cabinets, fixtures, and built-ins.
The SurfPrep ProFoam sanding pad is described as 3-2/3 x 7 inches and 5 mm thick, giving a compact, thin pad size suited to cabinet components and detail sanding work.
The web description identifies the medium SurfPrep ProFoam pad with a 120-150 grit range, placing it in the intermediate sanding stage for balancing material removal with surface refinement.
The 5 mm foam thickness, noted in the SAP description, provides a thin cushion that follows minor surface variations while keeping pressure controlled, supporting consistent scratch patterns.
The SAP description lists a 10-hole pattern, which forms vent paths across the pad for dust movement when matched to suitable backing patterns, helping maintain a cleaner cutting surface.
The pad is categorized under Abrasives, Hand Sanding, and Abrasive Pads and Sponges, positioning it for controlled manual sanding in cabinet and woodworking environments.
Part number SP3X7PF5MB.10-100 identifies this exact SurfPrep ProFoam medium grit, 7 inch by 3 inch, 5 mm thick, 10-hole hand sanding pad for precise product selection and reordering.
The SurfPrep ProFoam medium grit 7 inch by 3 inch by 5 mm pad with a 10-hole layout brings together a defined size, controlled foam thickness, and 120-150 medium grit range for predictable hand sanding. Its place in SurfPrep's Abrasive Pads and Sponges class signals a role in everyday cabinet, furniture, and woodworking workflows where installers and finishers rely on repeatable scratch patterns. For shops standardizing on a specific hand sanding pad, the SP3X7PF5MB.10-100 identifier ties this exact configuration to ordering, so the same dimensions, foam support, and medium cut can be applied across multiple projects.
Sold In: 100 Each