Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding disc is a 5 inch diameter, 5mm thick foam abrasive disc with a very fine 280-320 grit aluminum oxide surface, so it levels surfaces while leaving a smooth, consistent scratch pattern that helps with uniform finishing. The disc uses a foam body, which allows it to conform to profiles and edges, giving better contact where flat paper tends to bridge over contours. Its very fine 280-320 grit cut is suited to preparing surfaces that are already shaped, so it refines rather than aggressively removes material, supporting controlled scuff sanding. The hook and loop backing allows quick disc changes during sanding jobs, which helps keep workflows moving on multi-step prep. As an abrasive disc in SurfPrep's ProFoam line, it fits into abrasive setups where a foam-backed, detail-friendly sanding step is needed.
This SurfPrep 5mm ProFoam hook and loop disc in 280-320 grit is intended for preparing any surface that requires nice, consistent, even cutting and flat sanding, so it is suited to the final prep stages on already-machined wood parts. The foam-backed structure works with hook and loop sanding tools that accept this style of disc, allowing quick changes between other abrasive discs in the same workflow. Because it is very fine, the disc supports light material removal and surface refinement, which is useful when moving from shaping toward finishing. Within an abrasive disc setup, this product functions as a controlled scuff-sanding step that helps produce a refined surface ready for the next coating or finishing operation.
The SurfPrep 5 inch x 5mm very fine 280-320 grit ProFoam hook and loop disc is described as an excellent choice for preparing any surface that requires nice, consistent, even cutting and flat sanding, so it fits well into cabinet and furniture shops that rely on predictable surface prep. It is specifically called out as an excellent choice by cabinet or furniture builders who must scuff sand into corners or opposing edges or sides, where rigid discs struggle to reach. The foam body flexes enough to let the abrasive reach into those transitions, supporting more complete preparation around inside corners. The disc is also described as a must use inside drawer boxes where manual hand sanding is a challenge or where disc sanders do not allow for full coverage into a corner, so it helps bring power-sanding efficiency into tight drawer interiors while still reaching the edges. In addition, the disc can be used to sand detailed white wood beading on moldings, which means the foam-supported abrasive can follow those small profiles for more even sanding than stiff-back abrasives often provide on decorative details.
The combination of 5mm ProFoam construction and very fine 280-320 grit aluminum oxide abrasive lets the disc both conform and cut evenly, which reduces the likelihood of high spots or missed areas on corners and beaded moldings in normal cabinet or furniture work. Because it is identified as an excellent choice for flat sanding and consistent, even cutting, shops can use it to refine surfaces without introducing uneven scratch patterns that complicate later finish steps. When used inside drawer boxes, the foam disc addresses areas where manual hand sanding is a challenge, helping bring the same level of surface preparation to interior corners as to open faces. For detailed white wood beading on moldings, the foam backing allows the abrasive to ride over raised and recessed sections more evenly, which supports a more uniform appearance when stains or clear finishes are applied. Across cabinet and furniture applications involving corners, opposing edges, sides, drawer interiors, and detailed moldings, the described behavior of this ProFoam disc helps create a smoother, more consistent foundation for subsequent finishing work.
This product is a SurfPrep 5 inch x 5mm very fine 280-320 grit aluminum oxide ProFoam hook and loop sanding disc, so it functions as a foam-backed abrasive disc for surface preparation.
The SurfPrep ProFoam sanding disc uses very fine 280-320 grit aluminum oxide, so it is suited for light material removal, scuff sanding, and refining surfaces before finishing steps.
The disc is described as excellent for cabinet builders who must scuff sand into corners or opposing edges or sides, and it is a must use inside drawer boxes where hand sanding is a challenge.
The 5mm ProFoam disc is a must use inside drawer boxes where manual hand sanding is a challenge or where disc sanders do not allow full coverage into a corner, improving interior surface prep.
The SurfPrep ProFoam sanding disc can be used to sand detailed white wood beading on moldings, so it supports sanding on small, decorative profiles and helps maintain consistent surface quality.
This ProFoam disc is described as excellent for preparing surfaces that require nice, consistent, even cutting and flat sanding, so it focuses on controlled scuff sanding and refinement.
The SurfPrep 5 inch x 5mm very fine 280-320 grit aluminum oxide ProFoam hook and loop sanding disc offers consistent, even cutting for flat sanding, corners, drawer interiors, and detailed white wood beading, so it fits demanding cabinet and furniture surface preparation workflows.
Sold In: 100 Each