SurfPrep 5 inch ProFoam sanding disc is a very fine 280-320 grit aluminum oxide foam-backed abrasive designed for preparing surfaces that need soft flexibility. The 5 inch diameter pairs coverage with control, so cabinet shops can sand detailed parts without losing feel. The 1/2 inch foam thickness creates a forgiving cushion that lets the abrasive ride over profiles, which helps follow contours instead of cutting flat spots. The no hole design provides an uninterrupted face, so the entire surface of the disc stays in contact on narrow moldings and edges. The very fine 280-320 grit range is suited for final prep or between-coat work where a refined scratch pattern supports smooth finishing. The hook and loop backing lets installers and finishers change discs quickly, supporting a steady workflow at the bench or on the line.
This SurfPrep ProFoam sanding disc uses a hook and loop backing, so it mates to matching hook and loop backing pads on sanding tools. The 5 inch round format aligns with common 5 inch hook and loop pad sizes, keeping the foam supported out to the edge during use. The 1/2 inch foam thickness works as a built-in conforming pad, helping the very fine 280-320 grit aluminum oxide abrasive stay in contact across profiles and light contours. The no hole configuration suits setups where dust extraction through the pad is not required, which keeps the abrasive surface simple and uninterrupted on detailed work. In cabinet and woodworking environments, this combination supports consistent sanding passes on both flat and shaped parts.
This SurfPrep ProFoam sanding disc is described as an excellent choice for preparing any surface that requires soft flexibility, so it fits work where parts are shaped, routed, or profiled. The foam-backed 5 inch disc rides over profiles, which is valuable on cabinet components with beads, coves, or other milled details. A great choice by cabinet makers, it supports sanding or polishing the joint location of molding on a miter door, where hard-backed abrasives can dig into the corners. The very fine 280-320 grit aluminum oxide cut supports blending those joints into surrounding faces, which helps visually tie the miter area into the rest of the frame. In a production or shop setting, this combination helps address problem spots on doors and trim that are prone to burn-through with stiffer discs.
The 1/2 inch ProFoam layer gives the sanding disc soft flexibility, which helps it ride over profiles consistently from part to part. That foam behavior keeps pressure spread over the contact area, reducing isolated high-pressure points that can cut or burn through lines or finishes at edges. The very fine 280-320 grit aluminum oxide grain supports repeatable final-prep sanding by producing a fine scratch pattern suited to finishing steps. The no hole surface keeps abrasive coverage even across the face, which helps maintain uniform material removal on narrow moldings and miter joints. When cabinet makers return to the same miter door and molding layouts, this disc design helps them approach each joint location with similar contact and scratching behavior, supporting predictable finishing results across runs.
This SurfPrep ProFoam sanding disc uses aluminum oxide abrasive, which provides the cutting action needed for surface preparation on woodworking and cabinet components.
The SurfPrep 5 inch ProFoam sanding disc is rated very fine at 280-320 grit, which suits final preparation or light sanding before finishing on profiled and flat parts.
The 1/2 inch foam layer provides soft flexibility so the disc can ride over profiles, helping reduce cut-through at edges and detailed moldings during sanding.
This SurfPrep ProFoam sanding disc uses hook and loop backing, allowing it to attach to compatible hook and loop sanding pads for quick changes during work.
This ProFoam sanding disc is a great choice by cabinet makers for sanding or polishing the joint location of molding on a miter door, where flexibility matters.
The no hole design keeps the abrasive surface continuous, supporting even contact across profiles and narrow moldings without breaks in the sanding face.
The SurfPrep 5 inch x 1/2 inch very fine 280-320 grit aluminum oxide ProFoam sanding disc is built for surfaces that need soft flexibility and controlled cutting. For cabinet makers working miter door molding joints or other profiled details, the foam-backed, no hole, hook and loop disc helps ride over lines and finishes instead of cutting through them. Selecting this disc supports consistent preparation on shaped components and refined surfaces before finishing in cabinet and woodworking environments.
Sold In: 100 Each