Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding disc in a 6 inch diameter with 10mm thickness provides a foam-backed abrasive that conforms to surfaces while you sand, so woodworkers can work across profiles and flat areas with the same disc. The fine 180-220 grit range targets finishing and between-coat work, giving controlled material removal where surface quality matters. Aluminum oxide abrasive on the disc delivers a familiar cutting action on common woodworking substrates, supporting consistent performance across a range of shop tasks. The disc uses premium, pre-stressed minerals, so the abrasive layer is prepared to cut efficiently from the start of the job. A flexible, catalyzed multi-layered adhesive bonds the abrasive to the foam, maintaining the abrasive layer during bending and contour work. Precision controlled modified open-coat construction spaces the grains, helping the disc manage debris while maintaining its cutting face.
The 6 inch ProFoam sanding disc in fine 180-220 grit gives finishers a single abrasive that targets refinement rather than aggressive stock removal, which supports work between coats or before final finishing steps. The 10mm foam layer under the aluminum oxide grain allows the disc to compress into profiles, providing contact along curves where rigid backers struggle. Precision controlled modified open-coat design lets dust clear from between the grains, supporting a cleaner sanding path over time. The self-sharpening grains renew cutting points as they wear, which helps keep the scratch pattern consistent across the disc area. Tear-resistant behavior on all surfaces lets the disc move from detailed profiles to flat panels without switching abrasives, supporting a continuous workflow on doors, drawer fronts, and trim.
The SurfPrep ProFoam 6 inch x 10mm fine 180-220 grit aluminum oxide sanding disc is designed for extreme sanding on both profiles and flat surfaces, so it suits work that moves between shaped trim and broad panels. Premium, pre-stressed minerals give an immediate cutting response, which benefits tasks like leveling small defects before finishing. The flexible foam structure supports sanding along edges and into contours because it compresses while maintaining grain contact, helping reach into details on moldings and routed profiles. Tear-resistant performance on all surfaces keeps the disc intact as it moves across edges and transitions, useful when sanding built-up assemblies or detailed cabinet parts. The fine grit range focuses on refining the surface, supporting applications where the next step is a film build or clear finish. Because the disc uses aluminum oxide grain in a modified open-coat pattern, it maintains usable cutting on typical woodworking substrates while limiting buildup.
The flexible, catalyzed multi-layered adhesive used in this SurfPrep abrasive disc keeps the aluminum oxide grains bonded to the 10mm foam as the disc flexes, which supports repeatable sanding passes over complex shapes without losing abrasive. Precision controlled modified open-coat spacing gives each grain a defined position, which helps the disc produce a more uniform scratch pattern from center to edge. Faster cutting with less pressure lets the operator maintain light, even contact with the surface, reducing the tendency to create pressure spots and supporting consistent results across larger panels. Self-sharpening grains refresh their cutting edges during use, so the disc holds a similar cut rate for longer segments of work, which is useful when performing the same sanding step across a full run of parts. No loading or build-up of the substrate on the disc surface keeps the abrasive face cleaner, supporting predictable cutting behavior from the first piece in a batch to the last.
The SurfPrep ProFoam 6 inch x 10mm disc uses aluminum oxide abrasive, which provides a familiar cutting action on woodworking substrates and supports consistent sanding behavior across different parts.
The SurfPrep ProFoam sanding disc in fine 180-220 grit targets surface refinement, which suits between-coat sanding or final preparation where controlled material removal is important.
The 10mm foam backing allows the SurfPrep ProFoam disc to compress into curves and profiles, maintaining abrasive contact along shaped surfaces to support more uniform sanding on detailed trim.
The precision controlled modified open-coat design spaces the grains, allowing dust to move away from the cutting points so the SurfPrep ProFoam disc maintains a cleaner, more effective sanding face.
Self-sharpening grains on the SurfPrep ProFoam disc expose new cutting points during use, so the disc keeps a steadier cut rate and supports consistent results across multiple parts in a sanding run.
Tear-resistant behavior on all surfaces lets the SurfPrep ProFoam sanding disc move across edges and transitions without failing quickly, supporting extended use on cabinet doors, drawer fronts, and detailed moldings.
The SurfPrep ProFoam 6 inch x 10mm fine 180-220 grit aluminum oxide sanding disc brings premium, pre-stressed minerals, flexible multi-layered adhesive, and a precision controlled modified open-coat design into one abrasive, giving shops a single disc for extreme sanding on profiles and flat surfaces. For cabinet, millwork, and trim operations that demand consistent finishing with faster cutting at lower pressure, select this SurfPrep abrasive disc to support repeatable surface preparation across varied parts.
Sold In: 10 Each