Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding disc gives a professional-grade abrasive option for jobs that specify a 6 inch disc format, so installers and woodworkers can match existing setups while staying within the SurfPrep system. The 6 inch size aligns with common disc backers, which supports predictable contact area across flat or gently contoured work. The 1/2 inch profile noted in the description defines the foam thickness of the disc body, so the abrasive layer sits on a consistent cushion that helps the disc follow minor surface variations with controlled pressure. The Medium Plus designation paired with 150-180 grit identifies a work zone aimed at intermediate surface refinement, allowing users to remove prior scratch patterns while heading toward a pre-finish profile. The no hole construction keeps the abrasive face uninterrupted, which matters where vacuum extraction patterns are not required and full-face contact is preferred during sanding passes.
The 6 inch designation in this SurfPrep ProFoam 6 inch x 1/2 inch Medium Plus 150-180 grit no hole aluminum oxide sanding disc defines the working diameter, so users can match it to sanding tools sized for 6 inch discs. The no hole structure means the disc presents a solid abrasive face, which suits sanders or backup pads that do not depend on matched vacuum hole layouts. The 1/2 inch reference in the product description identifies the foam thickness, so installers know they are working with a cushioned disc body rather than a rigid paper-only abrasive. This combination of 6 inch diameter, 1/2 inch foam body, and no hole face gives a clear picture of how the disc will sit on a compatible backup pad and engage the work surface.
The SurfPrep ProFoam 6 inch x 1/2 inch Medium Plus 150-180 grit no hole aluminum oxide sanding disc sits in the Abrasive Discs class at Wurth Baer Supply, so it aligns with workflows that rely on disc-based sanding rather than sheets or belts. The 6 inch size suits tools and jigs set up around that diameter, allowing users to maintain known coverage per pass when working on cabinet doors, drawer fronts, or wider trim components. The Medium Plus 150-180 grit range defines the disc as a middle-stage abrasive, so it fits between initial leveling with coarser grits and final finishing work with finer abrasives. Because the disc uses an aluminum oxide abrasive, users can expect a familiar cut pattern that works well within standard woodworking prep routines.
The ProFoam name in the description identifies this as a foam-backed SurfPrep disc, and the listed 1/2 inch size confirms a half-inch foam body that sits under the abrasive layer. That foam body gives a controlled cushion between the sander and the work, allowing the Medium Plus 150-180 grit face to smooth surfaces while better following slight variations on panels and profile transitions. The no hole design keeps the abrasive uninterrupted across the full 6 inch diameter, which means every portion of the disc face participates in the cut, supporting even scratch distribution when sanding larger flat areas. By pairing foam backing, Medium Plus 150-180 grit, and aluminum oxide abrasive, this disc is configured to help installers and shop teams create consistent, predictable surface preparation as they move parts through their sanding stages.
The SurfPrep ProFoam sanding disc is specified as 6 inch x 1/2 inch, so users work with a 6 inch diameter disc built on a 1/2 inch foam body for cushioned sanding contact.
The Medium Plus 150-180 description identifies a mid-range abrasive, suitable for stepping down from coarser grits toward a smoother surface before moving on to finer sanding or finishing stages.
The 1/2 inch foam backing creates a cushioned interface under the abrasive, helping the disc follow gentle surface variations while maintaining a controllable contact feel during sanding passes.
No hole means the 6 inch disc face has no vacuum holes, presenting a continuous abrasive surface for applications where uninterrupted contact is preferred over matched dust extraction patterns.
This SurfPrep disc is described as an aluminum oxide sanding disc, giving users a well-established abrasive mineral with predictable cutting behavior in woodworking environments.
The manufacturer part number is SP6DPFHDMPB-100, so shops can reference that code when aligning this SurfPrep ProFoam disc with internal stock lists or future purchases.
The SurfPrep ProFoam 6 inch x 1/2 inch Medium Plus 150-180 grit no hole aluminum oxide sanding disc gives professional installers and shop teams a clearly defined abrasive choice in the Abrasive Discs category at Wurth Baer Supply. The combination of 6 inch diameter, foam-backed 1/2 inch body, Medium Plus 150-180 grit range, and aluminum oxide abrasive allows users to place this disc precisely in their sanding sequence for mid-stage surface refinement. By choosing this specific SurfPrep configuration, buyers can align their sanding setup around a known diameter and foam profile while working with a mid-grit aluminum oxide disc tailored to disc-based woodworking prep.
Sold In: 100 Each