SurfPrep 6 inch 400 grit sanding disc is a latex abrasive disc designed for fine sanding where a light cut and smooth surface are needed on woodworking or similar finishing tasks. The 400 grit rating creates a fine scratch pattern that helps refine surfaces after coarser grits, which supports cleaner finishing steps. The 6 inch diameter gives a broad sanding area per pass, helping cover panels or parts efficiently. A 6 hole layout in the disc aligns with compatible vacuum sanders to draw dust away from the work area, which improves visibility while sanding. The hook and loop backing allows the disc to attach to matching hook and loop backing pads, so discs can be swapped quickly during a job. As an abrasive disc in the SurfPrep line, it fits well into sanding systems built around SurfPrep tools and processes.
The SurfPrep 6 inch 400 grit 6 hole hook and loop latex sanding disc mounts on hook and loop sanding pads, so the disc attaches by pressing it onto the pad face. The hook and loop interface holds the disc flat against the backing pad, which contributes to even contact across the 6 inch diameter during sanding. The 6 hole pattern in the disc is arranged for sanders that draw dust through the pad and disc, so proper alignment of the disc holes over the pad holes supports consistent dust extraction while sanding. As a 400 grit abrasive disc, it typically follows coarser SurfPrep sanding steps when the surface is already shaped and only fine refinement is needed.
The SurfPrep latex sanding disc for fine sanding is well suited to shop and jobsite tasks that call for controlled material removal with a smooth finish. The 400 grit abrasive surface helps blend minor imperfections after heavier sanding, which is helpful on cabinet parts, trim pieces, or other components that move toward final finishing. Because the disc is 6 inches in diameter, it matches sanders set up for this common size, allowing straightforward use in many woodworking workflows that already rely on 6 inch pads. The 6 hole configuration works with sanders that route dust through matching holes, supporting a cleaner sanding area and helping maintain consistent contact between the disc and the work surface.
The SurfPrep 400 grit hook and loop disc uses its fine abrasive grade to leave a uniform scratch pattern, which simplifies moving to later finishing operations that depend on consistent surface preparation. The hook and loop backing lets installers and shop staff remove a worn disc and press on a fresh SurfPrep abrasive disc 400 grit without tools, reducing downtime between steps. By using a latex-backed construction, the disc is built to flex with typical surface contours during sanding passes, which helps maintain even pressure across the face of the disc. The 6 hole design also channels dust toward the sander when aligned with matching pads, keeping abrasive cutting points clearer for longer during fine-grit work. Together, these details help maintain repeatable sanding results across multiple parts and jobs.
The SurfPrep 6 inch 400 grit sanding disc suits fine sanding and surface refinement, because the 400 grit abrasive leaves a light scratch pattern that prepares parts for further finishing steps.
The SurfPrep 6 inch abrasive disc provides a wider sanding footprint than smaller pads, so each pass covers more surface and helps maintain consistent finish quality on larger parts.
The SurfPrep latex sanding disc 6 hole layout is designed for sanders that pull dust through matching holes, helping move dust off the work surface as you sand.
The SurfPrep 400 grit hook and loop disc uses hook and loop backing so it can be pressed onto or pulled off matching pads quickly, supporting fast abrasive changes between sanding stages.
The SurfPrep latex sanding disc uses a latex-backed construction that flexes with typical surfaces, helping maintain even pressure and a consistent scratch when sanding.
The SurfPrep part number SP6HLLPB400.6 identifies this specific 6 inch, 400 grit, 6 hole hook and loop latex sanding disc for ordering and repeat use.
The SurfPrep 6 inch 400 grit 6 hole hook and loop latex sanding disc gives professional installers and serious DIY users a fine-grit option that fits 6 inch hook and loop pads and supports dust collection. Its 400 grit surface focuses on light refinement rather than heavy stock removal, which is suited to finishing stages on woodworking or similar projects. By using a 6 hole pattern for compatible vacuum sanders and a hook and loop backing for quick disc changes, this SurfPrep disc supports steady workflow on repetitive sanding tasks. Choose this disc when a SurfPrep 6 inch 400 grit sanding disc matches your sanding steps and desired finish level.
Sold In: 1 Box