SurfPrep 6 inch 220 grit sanding disc is an aluminum oxide abrasive disc on a blended paper backing, so it handles fine finishing where a controlled scratch pattern is important. The disc uses a latex-backed construction with enhanced support of grain and edge-wear, which helps the abrasive stay effective along disc edges during longer sanding passes. Premium abrasive grain is used, which provides a true, consistent and uniform scratch, helping surfaces sand out predictably across a panel or part. The abrasive grain is configured in an open coat construction, so removed material has more space between grains, which supports smoother cutting in typical woodworking and finishing environments. This disc has no holes and uses a PSA attachment, pairing a continuous abrasive face with pressure-sensitive adhesion for flat, uninterrupted contact on compatible backup pads.
This SurfPrep PSA latex sanding disc uses a blended paper backing that supports the abrasive grain during sanding, so the disc stays stable while still conforming where needed. The latex element in the backing contributes to flexibility, which matters when operators fold or quarter the 6 inch disc to reach profiles, edges, and small features without cracking the abrasive layer. The open coat configuration of the premium aluminum oxide grain leaves space between abrasive points, helping the disc cut while limiting heavy loading during normal work. An innovative load-free coating further helps loose material release from the disc surface, so the abrasive points stay more exposed as sanding progresses.
This SurfPrep aluminum oxide sanding disc is a 220 grit fine abrasive, so it serves where a uniform, lighter scratch is required before finishing steps. The 6 inch diameter disc pairs with compatible 6 inch PSA backup pads on powered sanding tools, providing a broad sanding area for panels and larger components. Because the backing has excellent flexibility in finer grits, operators can fold or quarter the disc for intricate detail work on moldings or profiles while still using the same abrasive sheet. The no hole design keeps the full face covered in abrasive grain, which supports uninterrupted contact on the work surface in setups where through-disc dust extraction is not required.
The premium abrasive grain in an open coat construction provides a true, consistent and uniform scratch, which helps sanding stages line up from piece to piece without unexpected deep cuts. A blended paper backing provides enhanced support of grain and edge-wear, so the disc edges stay productive longer when sanding into corners or along edges rather than breaking down prematurely. The innovative load-free coating provides a fast rate of cut and longer life overall, which supports more continuous sanding between disc changes during typical finishing runs. Excellent flexibility in finer grits means operators can manipulate the disc into different shapes for detail work, helping reach profiles and recesses while maintaining the same 220 grit scratch pattern across both flat and contoured sections.
This SurfPrep sanding disc uses premium aluminum oxide abrasive grain, which provides a true, consistent and uniform scratch for controlled surface preparation.
The open coat construction spaces the grain so removed material has room to clear, supporting a consistent scratch pattern with reduced loading in normal sanding use.
The innovative load free coating lets abraded material release from the disc surface, helping maintain a fast rate of cut and extending usable disc life.
The blended paper backing provides enhanced support of grain and edge-wear, so the disc stays stable and productive along edges and during extended sanding passes.
The latex backed construction offers excellent flexibility in finer grits, allowing operators to fold and quarter the disc for intricate detail work on profiles and recesses.
The 220 grit rating provides a fine, uniform scratch that prepares surfaces for later finishing stages where a lighter, more controlled surface profile is preferred.
This 6 inch no hole SurfPrep PSA latex sanding disc combines premium aluminum oxide grain, an open coat construction, and a blended paper backing to deliver a true, consistent and uniform 220 grit scratch. The innovative load free coating supports a fast rate of cut and longer life overall, while excellent flexibility in finer grits helps one disc handle both panel work and intricate detail sanding. For workflows that rely on predictable fine sanding with aluminum oxide abrasives, this SP6PSALPB220 disc aligns with consistent surface preparation goals.
Sold In: 1 Box